{"id":83,"date":"2012-09-25T20:37:14","date_gmt":"2012-09-25T12:37:14","guid":{"rendered":"http:\/\/comp.utm.my\/azman\/?page_id=83"},"modified":"2018-01-04T23:52:39","modified_gmt":"2018-01-04T15:52:39","slug":"cv-2","status":"publish","type":"page","link":"https:\/\/people.utm.my\/azlansuhot\/cv-2\/","title":{"rendered":"CV"},"content":{"rendered":"

CURRICULUM VITAE
\nDr. Mohamed Azlan b. Suhot
\nUTM Razak School of Engineering and Advanced Technology
\nUniversiti Teknologi Malaysia
\nInternational Campus
\n54100 Kuala Lumpur
\nTelephone: 03-26154573 \/ 03-26154396 (office)
\nFax: 03-26934844
\nEmail: azlans.kl@utm.my<\/p>\n

Field of Expertise<\/p>\n

Composite
\nManufacturing, testing and defect analysis.<\/p>\n

Materials Characterisation
\nScanning electron microscopy, optical microscopy, image analysis and 3D X-ray microtomography.<\/p>\n

Experimental Mechanics
\nFatigue crack initiation and growth, SN testing and acoustic emission.
\nAcademic Qualification
\ni. Ph.D. (Composite Materials)
\nUniversity of Southampton, United Kingdom (2010)
\nThesis: The Effect of Voids on the Flexural Properties of Carbon\/Epoxy Composites.<\/p>\n

ii. M.Sc. (Materials Engineering)
\nUniversiti Sains Malaysia (USM), Malaysia (2000)
\nThesis: Study on Glass Ceramic Materials<\/p>\n

iii. B. Eng. (Materials Engineering)
\nUniversiti Sains Malaysia (USM), Malaysia (1996)
\nDissertation: Effects of Corrosion on Three-Point Bending Test of Steels.<\/p>\n

Professional Membership<\/p>\n

2011-2012 Malaysian Society for Engineering and Technology<\/p>\n

Awards<\/p>\n

i. Anugerah Perkhidmatan Cemerlang UTM 2016<\/p>\n

ii. SLAB\/UTM scholarship for continuing study for Master programme in the USM (1999-2000).<\/p>\n

iii. SLAB\/UTM scholarship for continuing study for PhD programme in the University of Southampton, UK (2003-2008).<\/p>\n

Career History<\/p>\n

i. Senior Lecturer, February 2011 – present<\/p>\n

UTM Razak School<\/p>\n

Level 7, Razak Tower<\/p>\n

Universiti Teknologi Malaysia<\/p>\n

Kuala Lumpur<\/p>\n

ii. Lecturer, July 2000 \u2013 February 2011
\nDepartment of Mechanical Engineering
\nCollege of Science Technology
\nUniversiti Teknologi Malaysia City Campus
\nKuala Lumpur<\/p>\n

ii. Tutor, December 1997 \u2013 July 2000
\nProgram for Diploma Studies
\nUniversiti Teknologi Malaysia
\nKuala Lumpur<\/p>\n

iii. Engineer, May 1996 \u2013 August 1997
\nProduction Department
\nPerusahaan Otomobil Nasional (PROTON) Shah Alam<\/p>\n

iv. Engineering Trainee, January 1994 \u2013 May 1995
\nEngineering Technical Service Department
\nSarawak Shell Berhad, Miri, Sarawak<\/p>\n

Academic Activities
\nSubject taught<\/p>\n

Sem 2 1718<\/p>\n\n\n\n
Kod Subjek<\/th>\nNama Subjek<\/th>\n<\/tr>\n<\/thead>\n<\/table>\n\n\n\n
SMJP3393<\/td>\nPEMESINAN BUKAN TRADISIONAL<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n
DDWJ1912<\/td>\nEXPERIMENTAL METHOD<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n
DDWJ2603<\/td>\nSAINS BAHAN<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n
MRSF2603<\/td>\nPENGURUSAN INOVATIF DAN KREATIF<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n
URSP0013<\/td>\nMETODOLOGI PENYELIDIKAN<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n
FRSS1473<\/td>\nENGINEERING SCIENCE<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sem 1 17\/18<\/p>\n\n\n\n\n
Kod<\/td>\nNama Subjek<\/td>\nSeksyen<\/td>\n<\/tr>\n
DDWJ2603<\/td>\nSains Bahan<\/td>\n29<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Sem 3 16\/17<\/p>\n\n\n\n
Kod<\/td>\nNama Subjek<\/td>\nSeksyen<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n\n\n\n\n
SMJP3393<\/td>\nPemesinan Bukan Tradisional<\/td>\n01<\/td>\n<\/tr>\n
FRSB1473<\/td>\nEngineering Science<\/td>\nSES<\/td>\n<\/tr>\n
FRSB1473<\/td>\nEngineering Science<\/td>\nSKC<\/td>\n<\/tr>\n
FRSB1473<\/td>\nEngineering Science<\/td>\nKLIA<\/td>\n<\/tr>\n
FRSH1513<\/td>\nMaterials technology<\/td>\nSES<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sem 2 16\/17<\/p>\n\n\n\n
Kod<\/td>\nNama Subjek<\/td>\nSeksyen<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n\n\n
DDWJ1912<\/td>\nExperimental Method<\/td>\n24<\/td>\n<\/tr>\n
FRSB1473<\/td>\nEngineering Science<\/td>\nSES<\/td>\n<\/tr>\n
FRSB1473<\/td>\nEngineering Science<\/td>\nACE<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Sem 1 16\/17<\/strong><\/p>\n\n\n\n\n\n\n\n\n
Bil<\/strong><\/td>\nKod<\/strong><\/td>\nNama Subjek<\/strong><\/td>\nSeksyen<\/strong><\/td>\n<\/tr>\n
1<\/strong><\/td>\nDDPJ3504<\/strong><\/td>\nPROJEK REKABENTUK MEKANIKAL<\/strong><\/td>\n50<\/strong><\/td>\n<\/tr>\n
2<\/strong><\/td>\nDDWJ1912<\/strong><\/td>\nEXPERIMENTAL METHOD<\/strong><\/td>\n10<\/strong><\/td>\n<\/tr>\n
3<\/strong><\/td>\nMRSE1523<\/strong><\/td>\nQuality Management and Techniques<\/strong><\/td>\n02<\/strong><\/td>\n<\/tr>\n
4<\/strong><\/td>\nFRSB1473<\/strong><\/td>\nEngineering Science<\/strong><\/td>\nSKC<\/strong><\/td>\n<\/tr>\n
5<\/strong><\/td>\nFRSB1473<\/strong><\/td>\nEngineering Science<\/strong><\/td>\nKLIA<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sem 3 15\/16<\/p>\n\n\n\n\n\n
Bil<\/strong><\/td>\nKod<\/strong><\/td>\nNama Subjek<\/strong><\/td>\nSeksyen<\/strong><\/td>\n<\/tr>\n
1<\/strong><\/td>\nFRSS1473<\/strong><\/td>\nEngineering Science
\n<\/strong><\/td>\n		KLIA<\/strong><\/td>\n<\/tr>\n
2<\/strong><\/td>\nFRSB1473<\/strong><\/td>\nEngineering Science<\/strong><\/td>\nSKC<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sem 2 15\/16<\/strong><\/p>\n\n\n\n\n\n\n
Bil<\/strong><\/td>\nKod<\/strong><\/td>\nNama Subjek<\/strong><\/td>\nSeksyen<\/strong><\/td>\n<\/tr>\n
1<\/strong><\/td>\nDDPJ2303<\/strong><\/td>\nMEKANIK BENDALIR<\/strong><\/td>\n63<\/strong><\/td>\n<\/tr>\n
2<\/strong><\/td>\nSRSD2082<\/strong><\/td>\nPEMBUATAN UNTUK REKABENTUK<\/strong><\/td>\n19<\/strong><\/td>\n<\/tr>\n
3<\/strong><\/td>\nFRSB1473<\/strong><\/td>\nEngineering Science<\/strong><\/td>\nSKC<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Sem 1 15\/16<\/strong><\/p>\n\n\n\n\n\n\n\n\n
Bil<\/strong><\/td>\nKod<\/strong><\/td>\nNama Subjek<\/strong><\/td>\nSeksyen<\/strong><\/td>\n<\/tr>\n
1<\/td>\nDDPJ2602<\/td>\nSAINS BAHAN<\/td>\n08<\/td>\n<\/tr>\n
2<\/td>\nDDPT3504<\/td>\nPROJEK REKABENTUK AERONAUTIK<\/td>\n28<\/td>\n<\/tr>\n
3<\/td>\nSRSD2072<\/td>\nBAHAN UNTUK REKABENTUK<\/td>\n19<\/td>\n<\/tr>\n
4<\/td>\nSRSI2013<\/td>\nSAINS KEJURUTERAAN<\/td>\n19<\/td>\n<\/tr>\n
5<\/td>\nFRSJ2393<\/td>\nProduction Systems<\/td>\nShingoU<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sem 2 14\/15<\/strong><\/p>\n\n\n\n\n
Bil<\/strong><\/td>\nKod<\/strong><\/td>\nNama Subjek<\/strong><\/td>\nSeksyen<\/strong><\/td>\n<\/tr>\n
1<\/strong><\/td>\nDDPJ2602<\/strong><\/td>\nSAINS BAHAN<\/strong><\/td>\n27<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sem 1 14\/15<\/strong><\/p>\n\n\n\n\n\n\n\n
Bil<\/strong><\/td>\nKod<\/strong><\/td>\nNama Subjek<\/strong><\/td>\nSeksyen<\/strong><\/td>\n<\/tr>\n
1<\/strong><\/td>\nDDPJ2602<\/strong><\/td>\nSAINS BAHAN<\/strong><\/td>\n23<\/strong><\/td>\n<\/tr>\n
2<\/strong><\/td>\nDDPT3504<\/strong><\/td>\nPROJEK REKABENTUK AERONAUTIK<\/strong><\/td>\n23<\/strong><\/td>\n<\/tr>\n
3<\/strong><\/td>\nSRSD2072<\/strong><\/td>\nBAHAN UNTUK REKABENTUK<\/strong><\/td>\n19<\/strong><\/td>\n<\/tr>\n
4<\/strong><\/td>\nSRSI1003<\/strong><\/td>\nMEKANIK KEJURUTERAAN<\/strong><\/td>\n20<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sem 2 13\/14<\/strong><\/p>\n\n\n\n\n\n
Bil<\/strong><\/td>\nKod<\/strong><\/td>\nNama Subjek<\/strong><\/td>\nSeksyen<\/strong><\/td>\n<\/tr>\n
1<\/td>\nDDPJ2602<\/td>\nSAINS BAHAN<\/td>\n17<\/td>\n<\/tr>\n
2<\/td>\nSRSI2013<\/td>\nSAINS KEJURUTERAAN<\/td>\n19<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sem 1 13\/14<\/strong><\/p>\n\n\n\n\n\n
Bil<\/strong><\/td>\nKod<\/strong><\/td>\nNama Subjek<\/strong><\/td>\nSeksyen<\/strong><\/td>\n<\/tr>\n
1<\/strong><\/td>\nDDPJ2602<\/strong><\/td>\nSAINS BAHAN<\/strong><\/td>\n23<\/strong><\/td>\n<\/tr>\n
2<\/strong><\/td>\nSRSI2043<\/strong><\/td>\nPRINSIP-PRINSIP ERGONOMIK<\/strong><\/td>\n19<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sem 2 12\/13<\/strong><\/p>\n\n\n\n\n\n\n
Bil<\/strong><\/td>\nKod<\/strong><\/td>\nNama Subjek<\/strong><\/td>\nSeksyen<\/strong><\/td>\n<\/tr>\n
1<\/strong><\/td>\nDDJ3603<\/strong><\/td>\nSAINS BAHAN<\/strong><\/td>\n17<\/strong><\/td>\n<\/tr>\n
2<\/strong><\/td>\nSRI2013<\/strong><\/td>\nSAINS KEJURUTERAAN<\/strong><\/td>\n19<\/strong><\/td>\n<\/tr>\n
3<\/strong><\/td>\nSRSI2013<\/strong><\/td>\nSAINS KEJURUTERAAN<\/strong><\/td>\n19<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sem 1 12\/13<\/strong><\/p>\n\n\n\n\n
Bil<\/strong><\/td>\nKod<\/strong><\/td>\nNama Subjek<\/strong><\/td>\nSeksyen<\/strong><\/td>\n<\/tr>\n
1<\/strong><\/td>\nDDPJ2602<\/strong><\/td>\nSAINS BAHAN<\/strong><\/td>\n23<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sem 2 11\/12<\/strong><\/p>\n\n\n\n\n\n\n
Bil<\/strong><\/td>\nKod<\/strong><\/td>\nNama Subjek<\/strong><\/td>\nSeksyen<\/strong><\/td>\n<\/tr>\n
1<\/strong><\/td>\nDDJ3603<\/strong><\/td>\nSAINS BAHAN<\/strong><\/td>\n17<\/strong><\/td>\n<\/tr>\n
2<\/strong><\/td>\nSME2921<\/strong><\/td>\nMAKMAL II<\/strong><\/td>\n21<\/strong><\/td>\n<\/tr>\n
3<\/strong><\/td>\nSRI2013<\/strong><\/td>\nSAINS KEJURUTERAAN<\/strong><\/td>\n19<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sem 1 11\/12<\/strong><\/p>\n\n\n\n\n\n\n
Bil<\/strong><\/td>\nKod<\/strong><\/td>\nNama Subjek<\/strong><\/td>\nSeksyen<\/strong><\/td>\n<\/tr>\n
1<\/strong><\/td>\nDDJ3603<\/strong><\/td>\nSAINS BAHAN<\/strong><\/td>\n23<\/strong><\/td>\n<\/tr>\n
2<\/strong><\/td>\nDDJ3932<\/strong><\/td>\nMAKMAL KEJURUTERAAN<\/strong><\/td>\n23<\/strong><\/td>\n<\/tr>\n
3<\/strong><\/td>\nSME2113<\/strong><\/td>\nMEKANIK PEPEJAL I<\/strong><\/td>\n21<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sem 2 10\/11<\/strong><\/p>\n\n\n\n\n
Bil<\/strong><\/td>\nKod<\/strong><\/td>\nNama Subjek<\/strong><\/td>\nSeksyen<\/strong><\/td>\n<\/tr>\n
1<\/strong><\/td>\nSRI2013<\/strong><\/td>\nSAINS KEJURUTERAAN<\/strong><\/td>\n19<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sem 1 10\/11<\/strong><\/p>\n\n\n\n\n\n\n\n
Bil<\/strong><\/td>\nKod<\/strong><\/td>\nNama Subjek<\/strong><\/td>\nSeksyen<\/strong><\/td>\n<\/tr>\n
1<\/strong><\/td>\nDDJ2922<\/strong><\/td>\nMAKMAL KEJURUTERAAN I<\/strong><\/td>\n23<\/strong><\/td>\n<\/tr>\n
2<\/strong><\/td>\nDDJ3603<\/strong><\/td>\nSAINS BAHAN<\/strong><\/td>\n23<\/strong><\/td>\n<\/tr>\n
3<\/strong><\/td>\nDDJ3932<\/strong><\/td>\nMAKMAL KEJURUTERAAN<\/strong><\/td>\n23<\/strong><\/td>\n<\/tr>\n
4<\/strong><\/td>\nSHP2323<\/strong><\/td>\nSISTEM TEKNOLOGI PENGAJARAN<\/strong><\/td>\n35<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sem 2 09\/10<\/strong><\/p>\n\n\n\n\n\n\n
Bil<\/strong><\/td>\nKod<\/strong><\/td>\nNama Subjek<\/strong><\/td>\nSeksyen<\/strong><\/td>\n<\/tr>\n
1<\/strong><\/td>\nDDJ2103<\/strong><\/td>\nMEKANIK PEPEJAL<\/strong><\/td>\n17<\/strong><\/td>\n<\/tr>\n
2<\/strong><\/td>\nDDJ3932<\/strong><\/td>\nMAKMAL KEJURUTERAAN<\/strong><\/td>\n17<\/strong><\/td>\n<\/tr>\n
3<\/strong><\/td>\nDDJ3932<\/strong><\/td>\nMAKMAL KEJURUTERAAN<\/strong><\/td>\n23<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sem 1 09\/10<\/strong><\/p>\n\n\n\n\n\n
Bil<\/strong><\/td>\nKod<\/strong><\/td>\nNama Subjek<\/strong><\/td>\nSeksyen<\/strong><\/td>\n<\/tr>\n
1<\/strong><\/td>\nDDJ2922<\/strong><\/td>\nMAKMAL KEJURUTERAAN I<\/strong><\/td>\n23<\/strong><\/td>\n<\/tr>\n
2<\/strong><\/td>\nDDJ3603<\/strong><\/td>\nSAINS BAHAN<\/strong><\/td>\n23<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sem 2 08\/09<\/strong><\/p>\n\n\n\n\n\n\n
Bil<\/strong><\/td>\nKod<\/strong><\/td>\nNama Subjek<\/strong><\/td>\nSeksyen<\/strong><\/td>\n<\/tr>\n
1<\/strong><\/td>\nDDJ3603<\/strong><\/td>\nSAINS BAHAN<\/strong><\/td>\n20<\/strong><\/td>\n<\/tr>\n
2<\/strong><\/td>\nDDJ3703<\/strong><\/td>\nPROSES PEMBUATAN<\/strong><\/td>\n18<\/strong><\/td>\n<\/tr>\n
3<\/strong><\/td>\nDDJ3703<\/strong><\/td>\nPROSES PEMBUATAN<\/strong><\/td>\n23<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Sem 1 08\/09<\/strong><\/p>\n\n\n\n\n\n\n
Bil<\/strong><\/td>\nKod<\/strong><\/td>\nNama Subjek<\/strong><\/td>\nSeksyen<\/strong><\/td>\n<\/tr>\n
1<\/strong><\/td>\nDDJ2922<\/strong><\/td>\nMAKMAL KEJURUTERAAN I<\/strong><\/td>\n17<\/strong><\/td>\n<\/tr>\n
2<\/strong><\/td>\nDDJ3703<\/strong><\/td>\nPROSES PEMBUATAN<\/strong><\/td>\n19<\/strong><\/td>\n<\/tr>\n
3<\/strong><\/td>\nDDJ3703<\/strong><\/td>\nPROSES PEMBUATAN<\/strong><\/td>\n20<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Other academic activities<\/p>\n

2017<\/p>\n

    \n
  1. Emergency Response Team Kolej Siswa Jaya<\/li>\n
  2. AJK USR Razak School: Adopt a kampung<\/li>\n
  3. AJK penilaian penentuan dan penilaian teknikal, UPMU<\/li>\n
  4. Board of Studies EDEBM<\/li>\n
  5. Juruaudit Fail Kursus MEBM<\/li>\n
  6. Ketua Pengawas Peperiksaan Program Kerjasama Sem 1 1718<\/li>\n
  7. Ketua Pengawas Peperiksaan Program Kerjasama Sem 2 1617<\/li>\n
  8. Panel pembentangan projek latihan industri PPD SPACE<\/li>\n
  9. Panel penilai audit pematuhan PPD SPACE<\/li>\n
  10. Panel penilai GUP Tier 1 2017\/1<\/li>\n
  11. Panel penilai \u2013 Penilaian peringkat pertama PhD Mohd Haziq<\/li>\n
  12. Penceramah Program Tatasusila Minggu Mesra Mahasiswa Baharu Program Ijazah Sarjana Muda Sesi 2017\/2018<\/li>\n
  13. Pengerusi Panel Penilai Simposium Projek Sarjana Sem 2 2016\/2017<\/li>\n
  14. Penilai Dana Penyelidikan UTM Razak School<\/li>\n
  15. Penyedia dokumen SAR EMOSHM<\/li>\n
  16. Penyelaras Kursus Bengkel Pengajaran Program Kerjasama Sem 1 2017\/2018<\/li>\n
  17. Penyelaras Kursus Bengkel Penilaian Program Kerjasama Sem 1 2017\/2018<\/li>\n
  18. Penyelaras EDEBM, EDRBM dan EDFM<\/li>\n
  19. Penyelia Amali Makmal Program Kerjasama Sem 1 2017\/2018<\/li>\n
  20. Felo Kolej Siswa Jaya<\/li>\n
  21. Penilai manuskrip Journal of Advanced Research in Applied Mechanics<\/li>\n
  22. Ahli task force APEL Centre UTM Razak School<\/li>\n
  23. Tender Technical Specification Approval Committee MJIIT<\/li>\n
  24. Lembaga Pengarah Arus Infiniti Sdn. Bhd.<\/li>\n
  25. Ahli National STEM Movement Chapter UTM Kuala Lumpur<\/li>\n<\/ol>\n

    2016<\/p>\n

      \n
    1. AJK kertas kerja program diploma eksekutif kejuruteraan selenggara<\/li>\n
    2. AJK kariah masjid UTMKL<\/li>\n
    3. AJK penilaian penentuan dan penilaian teknikal UPMU<\/li>\n
    4. Penyelaras kursus bengkel pengajaran program kerjasama sem 1 16\/17<\/li>\n
    5. Penyelaras kursus bengkel penilaian program kerjasama sem 1 16\/17<\/li>\n
    6. AJK USR Razak School: Adopt a kampung<\/li>\n
    7. AJK COPPA program MSED UTM Razak School<\/li>\n
    8. AJK OSHE Kolej Siswa Jaya<\/li>\n
    9. AJK penentuan teknikal tender MJIIT<\/li>\n
    10. Panel penilai colloquium ENG.D<\/li>\n
    11. Panel penilai pembentangan projek EMOSHM<\/li>\n
    12. Panel penilai pembentangan projek MEBM<\/li>\n
    13. Panel pembentangan projek diploma UTMSpace<\/li>\n
    14. Panel penilai research proposal defense (master)<\/li>\n
    15. Menyediakan dokumen untuk program EDEBM untuk audit MQA<\/li>\n
    16. Penyelaras EDEBM. EDRBM dan EDFM<\/li>\n
    17. Felo Kolej Siswa Jaya<\/li>\n
    18. AJK Pro-Q<\/li>\n
    19. Ahli penubuhan APEL Centre<\/li>\n
    20. Panel penilai teknikal proposal GUP Tier 1 2016\/1<\/li>\n
    21. Panel penilai teknikal penilaian GUP Tier 2 2016\/1<\/li>\n
    22. Penyelia makmal program kerjasama UTMSpace sem 1 sesi 2016\/2017<\/li>\n
    23. Board of Studies EDEBM<\/li>\n
    24. Panel penilai simposium projek sarjana<\/li>\n<\/ol>\n

      2015<\/p>\n

        \n
      1. Jawatankuasa penentuan teknikal tender MJIIT<\/li>\n
      2. Felo Kediaman Siswa Jaya<\/li>\n
      3. Panel penilai pembentangan projek 1 MEBM<\/li>\n
      4. Panel penilai pembentangan projek 1 dan 2 EMOSHM<\/li>\n
      5. Kolokium penyelidikan Eng. Doctorate<\/li>\n
      6. Panel penilai research proposal eng. doctorate<\/li>\n
      7. Jawatankuasa induk pemilihan MPP<\/li>\n
      8. Fasilitator program pembentukan jawatankuasa kolej mahasiswa<\/li>\n
      9. Ahli badan kebajikan staf<\/li>\n
      10. Ahli jawatankuasa Industrial Training Talk<\/li>\n
      11. Ahli jawatankuasa kariah masjid UTMKL<\/li>\n
      12. Ahli jawatankuasa penilaian teknikal UTM Razak School<\/li>\n
      13. Ahli jawatankuasa ceramah Professional Engineer<\/li>\n
      14. Bengkel hala tuju program diploma eksekutif<\/li>\n
      15. Panel penilai proposal defense phd<\/li>\n
      16. Penyelaras EDEBM<\/li>\n
      17. Ahli jawatankuasa ProQ<\/li>\n
      18. AJK penasihat program Riang ria syawal<\/li>\n
      19. AJK penasihat program tautan kasih ramadan<\/li>\n<\/ol>\n

        2014<\/p>\n

          \n
        1. Majlis konvokesyen EDGE<\/li>\n
        2. Panel penilai pembentangan projek 2 MEBM<\/li>\n
        3. MOA antara Ace Resources dan Bright Newstar<\/li>\n
        4. Penyelaras Program EDGE<\/li>\n
        5. Penilai GUP<\/li>\n
        6. Penilai Research Proposal Master<\/li>\n
        7. Penilai Projek 2 EMOSHM<\/li>\n
        8. Penilai projek MEBM<\/li>\n
        9. Jawatankuasa penentuan teknikal tender MJIIT<\/li>\n<\/ol>\n

          2013<\/p>\n

            \n
          1. Penyediaan Dokumen APEL<\/li>\n
          2. Panel Proposal Defense Presentation Eng Doc<\/li>\n
          3. Panel penilai research proposal defense Phd<\/li>\n
          4. Panel penilai AKA 2012<\/li>\n
          5. Pemurnian Kertas Kerja Program Baru UTM Razak School<\/li>\n
          6. AJK Kurikulum Sarjana Sains (Kejuruteraan Penyelenggaraan)<\/li>\n
          7. Panel penilai pembentangan Projek 2 MEBM<\/li>\n
          8. Penyelia fakulti Latihan Industri<\/li>\n
          9. Panel penilai research proposal defense (Master)<\/li>\n
          10. Pengerusi penilai research proposal defense Phd<\/li>\n
          11. Panel penilai Colloqium Eng. Doc.<\/li>\n
          12. Panel penilai projek 1 MEBM<\/li>\n
          13. AJK Masjid UTMKL<\/li>\n
          14. MOU antara Shingo U dan UTM<\/li>\n
          15. Penyedia Kertas kerja EDFM Indonesia<\/li>\n
          16. Pegawai Informasi Pendaftaran Mahasiswa Baru Diploma Sesi 2013\/2014<\/li>\n
          17. Felo Kediaman Siswa Jaya<\/li>\n
          18. Penyelaras Unit EDGE<\/li>\n
          19. Penyelaras Program Executive Diploma Engineering Business Management<\/li>\n<\/ol>\n

            2012<\/p>\n

              \n
            1. Ahli panel untuk 2nd Postgraduate Research Colloquium UTM Razak School<\/li>\n
            2. Penyedia kertas cadangan pembentukan program baru pasca ijazah UTM Razak School<\/li>\n
            3. AJK Penilaian semula APEL bagi Program Eksekutif UTM Razak School<\/li>\n
            4. Penyelaras Unit EDGE dan Penyelaras EDEBM<\/li>\n
            5. Pembentukan Program MSc Engineering Design<\/li>\n
            6. AJK Masjid UTM KL<\/li>\n
            7. Ketua Biro Perhubungan Pelajar Majlis Penyampaian Ijazah Graduan UTM Razak School<\/li>\n
            8. Penyelia Latihan Industri pelajar UTM<\/li>\n
            9. Felo Kediaman Siswa Jaya, UTM International Campus<\/li>\n
            10. Pegawai Pengiring Program Baktisiswa di KG. Jerangau, Dungun<\/li>\n
            11. Penilai pembentangan Kertas Cadangan Pelajar UDP 0010 Metodologi Penyelidikan<\/li>\n
            12. Penyelaras bengkel penilaian Diploma Program kerjasama<\/li>\n
            13. Penyedia laporan COPIA UTM Razak School<\/li>\n
            14. Pengerusi pembentangan Capstone Projek Sarjana Pengurusan Projek<\/li>\n
            15. AJK kurikulum Sarjana Kejuruteraan Penyelenggaraan<\/li>\n
            16. Penilai Tesis MEBM<\/li>\n
            17. Panel penilai Anugerah Kualiti Akademik<\/li>\n
            18. Panel penilai 1st Postgraduate research Colloquium UTM Razak School<\/li>\n<\/ol>\n

              2011<\/p>\n

                \n
              1. Pelaksana OBE di fakulti<\/li>\n
              2. AJK Emergency management team KSJ<\/li>\n
              3. Penyelaras bengkel pengajaran program kerjasama<\/li>\n
              4. Penyelia amali program kerjasama<\/li>\n
              5. Penyelaras bengkel penilaian program kerjasama<\/li>\n
              6. Penyelia amali makmal DMM 2320<\/li>\n
              7. Panel 19th Colloqium for Engineering Doctorate Students<\/li>\n
              8. Panel Anugerah Kualiti Akademik<\/li>\n
              9. Biro pameran dan jualan majlis konvo RAzak School 2011<\/li>\n
              10. AJK Semakan kurikulum Sarjana Muda Rekabentuk Industri<\/li>\n
              11. Penasihat akademik Pelajar SRSI<\/li>\n
              12. Penyedia dokumen permohonan akreditasi MQA bagi program eksekutif EDEBM<\/li>\n
              13. AJK Aerostructure Manufacturing Innovation Centre (AMIC)<\/li>\n
              14. AJK pembentukan dokumen MQA Executive Master Occupational Safety and Health Management<\/li>\n
              15. AJK Koperasi Kolej Siswa Jaya<\/li>\n
              16. AJK pembentukan MSc. In Engineering Asset Management<\/li>\n<\/ol>\n

                2010<\/p>\n

                  \n
                1. AJK Pusat Pembangunan Pelajar<\/li>\n
                2. Penyelaras Program Kerjasama Diploma Kejuruteraan Mekanikal<\/li>\n
                3. Penyelaras EDEBM<\/li>\n
                4. Penyelaras Makmal UTM Razak School<\/li>\n
                5. AJK pembentukan MSc. Engineering Asset Management<\/li>\n
                6. AJK penyediaan dokumen MQA EMOSHM<\/li>\n
                7. AJK pembidaan Aerostructure Manufacturing Innovation Centre (AMIC)<\/li>\n
                8. Jawatankuasa PROTEM MJIIT<\/li>\n
                9. Jawatankuasa Mphil dan PhD UTM Razak School<\/li>\n
                10. AJK semakan kurikulum Sarjana Muda Rekabentuk Industri<\/li>\n
                11. Penyedia dokumen MQA bagi program EDMMT<\/li>\n
                12. Penyedia dokumen MQA bagi program EDEBM<\/li>\n<\/ol>\n

                  2009<\/p>\n

                    \n
                  1. Penyelaras Diploma Teknologi (Persenjataan)<\/li>\n
                  2. Penyelaras subjek DDJ 3603<\/li>\n
                  3. Penyelaras program kerjasama<\/li>\n
                  4. AJK untuk pembangunan silibus Master in Sustainable Systems<\/li>\n
                  5. Penyelaras E-learning<\/li>\n
                  6. Ketua Makmal Sains Bahan\/Mekanik Pepejal<\/li>\n<\/ol>\n

                     <\/p>\n

                    2002-2003<\/p>\n

                    Coordinator for Joint Programme for Mechanical Engineering Department (2002-2003)<\/p>\n

                    Coordinator for Diploma of Mechanical Technology subjects (Turret Technology, Weapons Technology and Missile Technology)<\/p>\n

                    Committee for New Curriculum Development for Diploma of Mechanical Engineering and Diploma of Mechanical Engineering (Aeronautic)<\/p>\n

                     <\/p>\n

                    Supervision<\/p>\n

                    Diploma Projects<\/p>\n

                    2017<\/p>\n\n\n\n\n\n\n\n\n\n\n\n
                    Nama Pelajar<\/th>\nNama Projek<\/th>\nPeringkat Pengajian<\/th>\n<\/tr>\n<\/thead>\n
                    LAI XUAN LIANG<\/td>\nPRODUCTION SYSTEM FACILITIES AND EQUIPMENT TO MANUFACTURE BIOGEL GLOVE<\/td>\nDIPLOMA EKSEKUTIF<\/td>\n<\/tr>\n
                    NOOR ARDILA BINTI HAMID<\/td>\nFORKLIFT SAFETY<\/td>\nDIPLOMA EKSEKUTIF<\/td>\n<\/tr>\n
                    NORIZAN BTE SALLEHHUDIN<\/td>\nOCCUPATIONAL SAFETY AND HEALTH ERGONOMICS AT WORKPLACE<\/td>\nDIPLOMA EKSEKUTIF<\/td>\n<\/tr>\n
                    NUR JANNAH BINTI HUSSAIN<\/td>\nASRS FABRIC ROLL STORAGE AND RECTRICAL WITH AUTO DELIVERY SYSTEM<\/td>\nDIPLOMA EKSEKUTIF<\/td>\n<\/tr>\n
                    SHARMILA A\/P PARMASIVAM<\/td>\nOCCUPATIONAL SAFETY AND HEALTH<\/td>\nDIPLOMA EKSEKUTIF<\/td>\n<\/tr>\n
                    SITI NORIZA BINTI UMAR<\/td>\nENTREPRENEURSHIP AND SUPERVISORY ROLES<\/td>\nDIPLOMA EKSEKUTIF<\/td>\n<\/tr>\n
                    SITI NURSURAYA BINTI ALI<\/td>\nMENGGANTIKAN SISTEM SIMPANAN BEAM TUNGGAL KEPADA SISTEM BERGANDA \/ DUAL SISTEM<\/td>\nDIPLOMA EKSEKUTIF<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

                    2015<\/p>\n\n\n\n\n\n\n
                    Bil<\/th>\nNama Pelajar<\/th>\nNama Projek<\/th>\nPeringkat Pengajian<\/th>\n<\/tr>\n<\/thead>\n
                    1<\/td>\nMOHD FAEQ FAIROS BIN ROSLI<\/td>\nMANAGE DUST AT WORK SITE<\/td>\nDiploma Eksekutif<\/td>\n<\/tr>\n
                    2<\/td>\nZAIREEN AZHAR BIN RAZALI<\/td>\nCRANE AND LIFTING GEAR ACCIDENT (MARINE INDUSTRY)<\/td>\nDiploma Eksekutif<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

                    Master Projects<\/p>\n

                    2017<\/p>\n\n\n\n\n\n\n
                    Bil<\/th>\nNama Pelajar<\/th>\nNama Projek<\/th>\nPeringkat Pengajian<\/th>\n<\/tr>\n<\/thead>\n
                    1<\/td>\nMAT SAHARI BIN RAHMAT<\/td>\nImproving Maintenance Delay for 3-Ton Military <\/span>Truck in 74th<\/sup> Workshop Division<\/span><\/b><\/td>\nSARJANA \/ MASTER<\/td>\n<\/tr>\n
                    2<\/td>\nRAFIZIAKIL BIN MOHAMAD<\/td>\nOCCUPATIONAL RISK TO TUBERCULOSIS DISEASE AMONG HEALTH CARE WORKERS IN EMERGENCY DEPARTMENT HOSPITAL KUALA LUMPUR<\/td>\nSARJANA \/ MASTER<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

                    2016<\/p>\n\n\n\n\n\n\n\n\n\n\n\n
                    Bil<\/th>\nNama Pelajar<\/th>\nPeringkat<\/th>\nTajuk<\/th>\n<\/tr>\n<\/thead>\n
                    1<\/td>\nHAIRUL NIZAM BIN ABU BAKAR<\/td>\nSARJANA \/ MASTER<\/td>\nKAJIAN PENILAIAN RISIKO TERHADAP PROSES PEMESINAN DI KOLEJ KEMAHIRAN TINGGI MARA KEMAMAN<\/td>\n<\/tr>\n
                    2<\/td>\nMURALINTHIRAN A\/L MURUGAN<\/td>\nSARJANA \/ MASTER<\/td>\nREDUCTION OF MAJOR INJURIES DURING INSPECTION ON AMMUNITION AND EXPLOSIVES<\/td>\n<\/tr>\n
                    3<\/td>\nAZRUL AFANDI BIN AHMAD<\/td>\nSARJANA \/ MASTER<\/td>\nImproving inventory system for consumable and tool store in UniKl-MIAT<\/td>\n<\/tr>\n
                    4<\/td>\nMOHD ERRY BIN DUL<\/td>\nSARJANA \/ MASTER<\/td>\nOccupational Stress on Military Personnel in BoatSquadron, Semporna Sabah<\/td>\n<\/tr>\n
                    5<\/td>\nNUR IZZATI BT MOHD SUHOOD<\/td>\nSARJANA \/ MASTER<\/td>\n<\/td>\n<\/tr>\n
                    6<\/td>\nMOHD THAHAR BIN MOHD ARIFIN<\/td>\nSARJANA \/ MASTER<\/td>\nSAFETY MEASURES TO AVOID ANKLE INJURY DURING BASIC <\/strong>MILITARY TRAINING OF CADET OFFICERS IN KD SULTAN IDRIS I<\/strong><\/td>\n<\/tr>\n
                    7<\/strong><\/td>\nAIMAN BIN AMINUDIN<\/td>\nSARJANA \/ MASTER<\/td>\nEffect of thermal environment towards infra work site personnel of Ampang Line Extension Project<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

                    2014<\/p>\n\n\n\n\n\n\n\n\n
                    Bil<\/th>\nNama Pelajar<\/th>\nPeringkat<\/th>\nTajuk<\/th>\n<\/tr>\n<\/thead>\n
                    1<\/td>\nMALINI A\/P TAYAPARAN<\/td>\nSARJANA \/ MASTER<\/td>\nASSESSMENT ON ERGONOMIC RISK FACTORS OF LENS INSPECTION PROCESS AT OXY PHARMACEUTICAL<\/td>\n<\/tr>\n
                    2<\/td>\nNOR AMALINA BINTI MOHAMED DANI<\/td>\nSARJANA \/ MASTER<\/td>\nCONCEPTS AND TECHNIQUES OF VALUE ANALYSIS TO EFFECTIVELY control COST<\/td>\n<\/tr>\n
                    3<\/td>\nYUSRIN BIN MOHD YUNUS<\/td>\nSARJANA \/ MASTER<\/td>\nCUT INJURIES STUDY IN AN ELECTRONIC MANUFACTURING COMPANY IN BANDAR BARU BANGI.<\/td>\n<\/tr>\n
                    4<\/td>\nNUR IZZATI BT MOHD SUHOOD<\/td>\nSARJANA \/ MASTER<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

                    2011<\/p>\n\n\n\n\n\n\n
                    Bil<\/th>\nNama Pelajar<\/th>\nNama Projek<\/th>\nPeringkat Pengajian<\/th>\n<\/tr>\n<\/thead>\n
                    1<\/td>\nAdnan bin Jamburi<\/td>\nWay Forward to Total Quality Culture Development in PROTON<\/td>\nSARJANA \/ MASTER<\/td>\n<\/tr>\n
                    2<\/td>\nRajanikanth Thangarajoo<\/td>\nQuality defect reduction in monorail manufacturing using PFMEA methodology<\/td>\nSARJANA \/ MASTER<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

                     <\/p>\n

                    Research<\/p>\n\n\n\n\n\n\n\n\n
                    No<\/th>\nAmount (RM)<\/th>\nProject Status<\/th>\nProject Title<\/th>\nGrant<\/th>\n<\/tr>\n<\/thead>\n
                    1<\/td>\n32,000<\/td>\nACTIVE<\/td>\nDESIGN, FABRICATION AND INSTALLATION OF RAM-PUMP TO BE USED BY ORANG ASLI IN REMOTE AREA<\/td>\nDPUTMRAZAK<\/td>\n<\/tr>\n
                    2<\/td>\n20,000<\/td>\nACTIVE<\/td>\nINVESTIGATION OF BEST PARAMETERS TO OBTAIN OPTIMAL PERFORMANCE OF FULLY FUNCTIONED CROSSFLOW MICRO-TURBINE TO BE USED BY ORANG ASLI IN REMOTE AREA<\/td>\nTier 2<\/td>\n<\/tr>\n
                    3<\/td>\n39,900<\/td>\nCOMPLETED<\/td>\nUsing larger flaw sizes as acceptable criteria for aerostructure applications<\/td>\nTier 2<\/td>\n<\/tr>\n
                    4<\/td>\n20,000<\/td>\nCOMPLETED<\/td>\nUsing larger flaw sizes as acceptable criteria for aerostructure applications<\/td>\nNAS<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

                     <\/p>\n

                    List of publications<\/p>\n

                    Conference<\/p>\n\n\n\n\n\n\n
                    No<\/strong><\/td>\nJournal\/Title Name<\/strong><\/td>\nArticle\/Chapter Name<\/strong><\/td>\nPublisher<\/strong><\/td>\nYear<\/strong><\/td>\n<\/tr>\n
                    1<\/strong><\/td>\n\n
                    16TH<\/div>\n
                    INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS<\/div>\n<\/td>\n
                    		\n
                    THE EFFECT OF VOIDS ON THE FLEXURAL FATIGUE<\/div>\n
                    PERFORMANCE OF UNIDIRECTIONAL CARBON FIBRE<\/div>\n
                    COMPOSITES<\/div>\n<\/td>\n
                    		\u00a0ICCM-16<\/td>\n\u00a02007<\/td>\n<\/tr>\n
                    2<\/strong><\/td>\n2ND INTERNATIONAL CONFERENCE ON ENGINEERING OF TARUMANAGARA<\/td>\nTENSILE STRENGTH POLYMER MATRIX COMPOSITE WITH REINFORCEMENT GIGANTOCHLOA APUS<\/td>\nUNIVERSITY OF TARUMANAGARA<\/td>\n2015<\/strong><\/td>\n<\/tr>\n
                    3<\/strong><\/td>\nSYMPOSIUM ON THE 4TH ROYAL BELUM SCIENTIFIC EXPEDITION<\/td>\nTHE POTENTIAL OF MICRO-HYDROPOWER PLANT FOR ORANG ASLI COMMUNITY IN ROYAL BELUM STATE PARK, PERAK, MALAYSIA<\/td>\nPULAU BANDING FOUNDATION<\/td>\n2016<\/strong><\/td>\n<\/tr>\n<\/thead>\n<\/table>\n

                     <\/p>\n

                    Journal<\/p>\n\n\n\n\n\n\n
                    No<\/strong><\/td>\nJournal\/Title Name<\/strong><\/td>\nArticle Name<\/strong><\/td>\nType<\/strong><\/td>\nYear<\/strong><\/td>\n<\/tr>\n
                    1<\/strong><\/td>\nJournal of Advanced Research Design <\/strong><\/td>\nNoise measurement and awareness at construction site \u2013 A case study<\/strong><\/td>\n<\/td>\n2017<\/strong><\/td>\n<\/tr>\n
                    2<\/strong><\/td>\nJURNAL TEKNOLOGI<\/strong><\/td>\nTHE EFFECTS OF VOIDS ON THE FLEXURAL PROPERTIES AND FAILURE MECHANISMS OF CARBON\/EPOXY COMPOSITES<\/strong><\/td>\nPUBLICATION IN SCOPUS<\/strong><\/td>\n2014<\/strong><\/td>\n<\/tr>\n
                    3<\/strong><\/td>\nInternational Journal of Fatigue<\/td>\nThe Effect Of Voids On The Flexural Fatigue Performance Of Unidirectional Carbon Fibre Composites Developed For Wind Turbine Applications<\/td>\nPUBLICATION IN SCOPUS<\/td>\n2006<\/td>\n<\/tr>\n<\/thead>\n<\/table>\n

                     <\/p>\n

                    Book Chapters<\/p>\n\n\n\n\n\n\n
                    No<\/strong><\/td>\nJournal\/Title Name<\/strong><\/td>\nArticle\/Chapter Name<\/strong><\/td>\nPublisher<\/strong><\/td>\nYear<\/strong><\/td>\n<\/tr>\n
                    1<\/strong><\/td>\nAIRCRAFT MANAGEMENT FROM ENGINEERING SAFETY PERSPECTIVES<\/td>\nOPERATION STRATEGIES FOR NEW AIRCRAFT ARRIVAL<\/td>\nPUSTAKA SISTEM PELAJARAN SDN BHD<\/td>\n2016<\/strong><\/td>\n<\/tr>\n
                    2<\/strong><\/td>\nMATERIALS AND TESTING OF MECHANICAL ENGINEERING<\/td>\nFLEXURAL STRENGTH OF CARBON\/EPOXY COMPOSITES WITH VOIDS<\/td>\nPENERBIT UTM PRESS<\/td>\n2016<\/strong><\/td>\n<\/tr>\n
                    3<\/strong><\/td>\nOCCUPATIONAL SAFETY AND HEALTH PRACTICES: THE WAY FORWARD<\/td>\nREDUCTION OF MAJOR INJURIES DURING INSPECTION ON AMMUNITION AND EXPLOSIVES<\/td>\nPUSTAKA SITEM PELAJARAN SDN. BHD.<\/td>\n2016<\/strong><\/td>\n<\/tr>\n<\/thead>\n<\/table>\n

                     <\/p>\n","protected":false},"excerpt":{"rendered":"

                    CURRICULUM VITAE Dr. Mohamed Azlan b. Suhot UTM Razak School of Engineering and Advanced Technology Universiti Teknologi Malaysia International Campus 54100 Kuala Lumpur Telephone: 03-26154573 \/ 03-26154396 (office) Fax: 03-26934844 Email: azlans.kl@utm.my Field of Expertise Composite Manufacturing, testing and defect analysis. Materials Characterisation Scanning electron microscopy, optical microscopy, image analysis and 3D X-ray microtomography. Experimental […]<\/p>\n","protected":false},"author":5576,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"open","template":"","meta":{"footnotes":""},"class_list":["post-83","page","type-page","status-publish","hentry","entry"],"_links":{"self":[{"href":"https:\/\/people.utm.my\/azlansuhot\/wp-json\/wp\/v2\/pages\/83","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/people.utm.my\/azlansuhot\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/people.utm.my\/azlansuhot\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/people.utm.my\/azlansuhot\/wp-json\/wp\/v2\/users\/5576"}],"replies":[{"embeddable":true,"href":"https:\/\/people.utm.my\/azlansuhot\/wp-json\/wp\/v2\/comments?post=83"}],"version-history":[{"count":0,"href":"https:\/\/people.utm.my\/azlansuhot\/wp-json\/wp\/v2\/pages\/83\/revisions"}],"wp:attachment":[{"href":"https:\/\/people.utm.my\/azlansuhot\/wp-json\/wp\/v2\/media?parent=83"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}