Invitation to Leadership Lecture 2018

Assalamualaikum and Good Morning

We would like to invite all MJIIT Lecturer and Staff to attend the Leadership Lecture 2018 by Mr. Hiroyuki Imizu.
Detail of the lecture is as follows:
Date: 22 November 2018 (Thursday)
Time: 2.00pm
Venue: Azman Hashim Hall, Menara Razak
We sincerely hope for your kind support and cooperation to attend the lecture.
Thank you

FINAL YEAR PROJECT 1 (FYP1) ASSESSMENTS

Dear FYP1 supervisors,

All FYP1 assessments will be online (links below). You may start filling in rinkoh assessment form.
For your information, starting this semester, FYP1 presentation will be in the form of ‘3 minutes thesis’ (3MT) seminar. The seminar will be on the 20th December 2018, for all students. Students will have to submit their report to thier examiner a week before the seminar and the same examiner will be assessing their 3MT presentation. We will post more information about the seminar later on.
Here are the forms and their due dates:

Assessment Form

Due date

Examiner

Remarks

FYP1-3
RINKOH

14th December 2018

Lecturer from the same iKohza

Supervisor appoint lecturer from same ikohza as examiner

Rinkoh assessments has started since last month and Week 14 is the final week for rinkoh

FYP1-1
REPORT

14th December 2018

Lecturer from the same department

Examiner will be appointed by FYP coordinators.

Students will submit to examiner directly

FYP1-2
3MT SEMINAR

20th December 2018

Lecturer from the same department

Same examiner as above

FYP1-4
SUPERVISOR

21st December 2018

Supervisor

I noticed that some of you have chosen the wrong form for rinkoh assessment. Rinkoh assessment is using form  FYP1-3 (Highlighted in green below)
image.png

FYP1 3 MINUTES THESIS SEMINAR

Dear colleagues,

The 3 minutes thesis (3MT) seminar will be held on 20th December 2018 starting from 8.00 to 13.00, at 11 different classrooms in MJIIT.

Prior to this seminar, students will have to submit their FYP1 report to their examiner and the same examiner will be responsible to assess their 3MT presentation. List of examiners, venue and sessions will be shared later to all lecturers and FYP1 students.

The 3MT seminar will be similar to the international format of the 3MT presentation (https://threeminutethesis.uq.edu.au/watch-3mt). Students have only 3 minutes to present their work and the presentation must be easy to understand even by people from different research areas.They have to provide ONLY 1 SLIDE as visual aid.

3MT seminar details:

  • Date: 20th December 2018 (Thursday)
  • Session 1: 0800-1030
  • Session 2: 1030-1300
  • Venue: MJIIT classrooms
  • Per session per room: 10 to 11 students presenting
  • Students will have to prepare ONLY 1 SLIDE
  • Students time allocation:
    • 10 minutes each
    • 1 minute preparation
    • 3 minutes presentation
    • 5 minutes Q&A
    • 1 minute for cleanup (take USB out etc)
  • Examiner will key in marks in the online system directly
  • 2 best presenters will be chosen from each department. Winners will be announced next semester during FYP2 briefing

Mari Bersama Raikan Graduan, Ibu bapa dan Tetamu Sempena Majlis Konvokesyen UTM ke 61

C&P Vice Chancellor UTM

Assalamu’alaikum/Salam Sejahtera semua warga UTM,

 

Semoga semuanya sentiasa berada dalam kesejahteraan dan keceriaan.

Sebagaimana yang kita sedia maklum, Majlis konvokesyen UTM yang ke 61 akan berlangsung pada 10-12 November 2018 ini. Tentunya seperti yang saya kongsikan sebelum ini, kepada kita, konvokesyen adalah menjadi satu rutin yang diadakan 2 kali setahun. Tetapi kepada para graduan dan keluarga masing-masing, majlis konvokesyen merupakan satu majlis yang dinanti-nanti penuh bermakna dan menjadi satu kebanggaan atas pencapaian yang diperolehi.

Sehubungan dengan itu, saya memohon semua warga UTM agar kita turut sama meraikan kegembiraan graduan dan keluarga masing-masing. Kita sama ada warga akademik atau PPP seharusnya teruja untuk meraikan kegembiraan ini bersama pelajar dan keluarga mereka. Seperti kita selalu sebut ‘seluruh eko sistem kampus’ terlibat dalam mendidik pelajar. Justeru, saya sekali lagi mengajak seluruh warga kampus di semua peringkat untuk memberikan layanan terbaik kepada semua tetamu sama ada graduan mahu pun keluarga mereka. Saya juga amat berbangga dan merakamkan ucapan setinggi-tinggi penghargaan dan terima kasih kepada semua staf dan mahasiswa atas segala usaha, inisiatif dan komitmen dalam bergotong-royong membersihkan kawasan persekitaran Universiti ini. Kesepakatan dan kerbersamaan semua warga Universiti dalam memastikan kampus UTM sentiasa ceria ini amat saya hargai.

 

Semoga budaya mesra warga UTM dirasai oleh mereka. Sama-sama kita juga doakan agar Majlis konvokesyen UTM kali ke 61 ini akan berjalan lancar dan meriah.

Akhir kata, saya ucapkan setinggi-tinggi penghargaan kepada semua yang terlibat secara langsung maupun tidak langsung dalam menjayakan konvokesyen kali ini dan semua program-program lain yang diadakan sempena Majlis konvokesyen ini.

 

Sekian, terima kasih.

 

 

Assalamualaikum /Warm Greetings to UTM Community,

 

I hope that all of you are doing well and in good health. 

As we all know, the 61st Convocation Ceremony will take place on the 10th until the 12th of April 2018. As I have shared during the last convocation, to us, the convocation is a routine ceremony happening twice a year. However, to the graduates and their families, the convocation ceremony is an occasion much awaited, which is a proud and meaningful moment to celebrate their success. Therefore, 
in conjunction with this special event, I would urge the whole UTM community to celebrate this memorable occasion with the graduates and their families.

We should appreciate this happy moment in celebration with students and their families. 
As we frequently mention, the whole campus eco-system is involved in nurturing the students.
 As such, I would like to invite everyone in UTM community at all levels to give the best to all our guests, whether they are our graduates or their families. I am also very proud and appreciate all efforts, initiatives and commitments by UTM staff and students in working together to maintain the cleanliness of the campus. The unity and togetherness demonstrated by the community in making this university a “happy and cheerful” campus is always appreciated.

 

Let them feel our friendly culture. Let us pray that this UTM Convocation Ceremony will run smoothly with much joy and happiness.
Lastly, I would like to express my utmost appreciation to everyone who are involved directly and indirectly in making this convocation and all other programmes taking place in conjunction with this convocation ceremony a successful one.

 

Thank you.

Wahid Omar

UTM Vice-Chancellor

PELAKSANAAN INDEKS KOMPETENSI STAF (CIS) 2018

Assalamualaikum wrt,

Adalah dimaklumkan bahawa, penilaian Indeks Kompetensi Staf / Competency Index for Support Staf (CIS) merupakan Pra Syarat Wajib bagi Staf Pengurusan & Profesional Dan Pelaksana (Gred 1 – 54) mengisi Penilaian Prestasi Staf (e-LNPT) bagi tahun 2018.Staf dikehendaki untuk mengisi CIS terlebih dahulu sebelum dibenarkan untuk mengisi e-LNPT. 

Tarikh-tarikh penting bagi pelaksanaan pengukuran CIS adalah seperti berikut:

PYD MEMBUAT PENILAIAN SENDIRI PPC MEMBUAT PENILAIAN TERHADAP PYD
1 – 16 Disember 2018 17 – 31 Disember 2018

 

Maklumat tambahan berkaitan pelaksanaan pengukuran CIS boleh dilihat di dalam poster yang telah disediakan oleh pihak Urus setia. Segala kerjasama dan keperihatinan semua Staf Pengurusan, Profesional dan Pelaksana amatlah dihargai untuk menilai dan mengisi markah bagi mengelakkan berlaku sebarang masalah pada saat-saat akhir.

Sekian, terima kasih

Pembangunan Bahan E-Kandungan Terbuka

Assalamualaikum wbt dan Salam Sejahtera

YBhg. Prof./Datuk/Dato’/Saudara,

Saya diarah merujuk kepada perkara di atas.

Sebagaimana sedia maklum, Universiti telah bersetuju memberi markah bonus sebanyak 5% bagi pembangunan bahan ekandungan terbuka.

Pekeliling Pentadbiran Bil. 19/2016, Pelaksanaan Penambahbaikan Penilaian Prestasi Staf Akademik (eLPPT) Tahun 2016 Mengambil Kira Keperluan Universiti Penyelidikan Bagi Komponen Pengajaran, Penyelidikan dan Perkhidmatan adalah berkaitan.

DEFINISI:

Bahan eKandungan asli terbuka berdasarkan Dasar e-Pembelajaran Negara (DePAN) merangkumi bahan berbentuk digital yang:

1.         dibangunkan sendiri oleh pensyarah,

2.         tidak melanggar sebarang hakcipta,

3.         ditawarkan secara terbuka dalam talian bagi proses pengajaran dan pembelajaran.

4.         Penawarannya perlu secara terbuka di platform selaine-Learning UTM (bermakna, bahan boleh diakses secara terus oleh sesiapa sahaja).

Sehubungan itu, bagi penilaian tahun 2018, staf akademik perlu mengisi maklumat melalui My UTM pada pautan UTM Acad bagi tujuan semakan dan verifikasi oleh pihak UTMLead.  Markah Bonus akan dipaparkan secara automatik dalam e-LPPT bagi staf yang layak.

 
Bersama-sama ini disertakan MANUAL bagi tuntutan bonus pembangunan eKandungan melalui sistem My UTM.
 
Sebarang kemusykilan boleh hubungi Pengurus Multimedia Kreatif dan Teknologi Pembelajaran UTM di sambungan 37885 atau e-mail kepada nurbiha@utm.my.

Sekian, terima kasih.

High Precision Valve Seat

High Precision Valve Seat

Brand: NEWEN
Model: CONTOUR-CS

Like the principle of the turning lathe, FIXED-TURNING® is based on the simultaneous shifting of a single-point cutting tool around two axes (x, z). Unlike the lathe where the piece rotates, FIXED-TURNING® sees the tool rotating beyond its two axes (x, z) while the piece (cylinder head) remains still. The tool, piloted by a numerical system, has the capacity to describe the longest profiles (within the limit of the spindle) together with the most complex ones, including radii, straight lines and diverse concave or convex curves. Like the precision lathe, FIXED-TURNING® tool machines the most complex shapes with the highest precision. FIXED-TURNING® carries out different operations, including curves, straight lines, inclined in all the directions. The NEWEN® numerical control pilots the shifting of the tool so that the cutting section remains identical regardless of the portion of the machined profile. A powerful computer continuously calculates the optimal trajectory of the tool so that the cutting efforts are regular and reduced to a minimum. Every single shaving calculated from a fraction of a second to a fraction of a second is produced in such way that no fluctuation of the cutting efforts can disrupt the balance and the flexibility of the spindle. FIXED-TURNING® performs a perfect operation and ensures the air-tightness of the valve seats. The machining programs are automatically optimized and memorized for the operations to follow one another while the precision repeats itself endlessly.

Book HERE

Ref: http://www.newen.pl/materialy/eng/contour_2008_en_web.pdf

The T20, M40 And B40 Income Classifications in Malaysia

Malaysians are categorised into three different income groups: Top 20% (T20), Middle 40% (M40), and Bottom 40% (B40). Over the years, the bar for each group’s income level has increased and this is one of the indicators of economic growth. Here’s the latest definition for T20, M40 and B40 based on the findings from the Department of Statistics Malaysia in October 2017.

To be in the T20 group, a household needs to earn at least RM13,148 while M40 and B40 groups have moved their bars up to RM6,275 and RM3,000 respectively.

To recap, the Department of Statistics Malaysia has released a report named Household Income And Basic Amenities Survey 2016. In the report, it stated that the median household income for T20, M40 and B40 has shown a compound annual growth rate (CAGR) of more than 6%.

On top of that, Malaysia’s household median monthly income crossed the RM5,000 mark for the first time last year, with M40 households registering the highest growth in median income, according to the Department.

More details please go to

C&P from https://www.comparehero.my/blog/t20-m40-b40-malaysia