ISI/SCOPUS Journals
2025 H.A. Israr et al. Investigation of mode I interlaminar fracture toughness of recycled carbon in hybrid composite. Journal of Aeronautics, Astronautics and Aviation. (waiting for indexing)
2024 H.A. Israr et al. Investigation of tensile pseudo-ductility behavior of flax fiber in hybrid composite laminates. Journal of Aeronautics, Astronautics and Aviation. (waiting for indexing)
2024 K. J Wong, H.A. Israr et al. A new cohesive-based modelling of moisture-dependent mode II delamination of carbon/epoxy composites. Journal of Materials Research and Technology, 32
2024 M.A. Rizal, H.A. Israr et al. Fiber-reinforced thermoplastic composites for future use in aircraft radomes: Biomimetic design approaches and its performances, Fibers and Polymers
2024 H.A. Israr et al. Digital Image Correlation Technique for Failure and Crack Propagation of Fibre-Reinforced Polymer Composites – A Review. Composites and Advanced Materials, 33.
2023 M.K. Faizi, H.A. Israr et al. Energy Absorption Behavior of Oil Palm Empty Fruit Bunch Fiber-Reinforced Composites Subjected to Low-Velocity Impact. Journal Of Reinforced Plastics and Composites, 43 (9-10).
2022 W.W.F Chong, N.A. Ariffin, H.A. Israr et al. A Numerical Algorithm For Grease-Lubricated Point Contact at Different Regimes of Lubrication. Jurnal Tribologi, 35.
2022 H.A. Israr et al. Experimental Investigation of the Axial Crushing Response of Flax/glass Eco-hybrid Self-Supporting Web Composites. Fibers, 10 (9).
2022 H.A. Israr et al. Preliminary Structural Design of Coreless Spoiler by Topological Optimization. Processes, 10 (2076).
2022 K.O. Low, M. Johar, A.N. Sung, M.N. Nasir, S. Kaloor, M. Petru, H.A. Israr, K.J. Wong. Displacement rate effects on mixed-mode I/II delamination of laminated carbon/epoxy composites. Polymer Testing, 108, 107512.
2022 M.K. Faizi, S.A. Bakar, M.S. Majid, S.B.M. Tamrin, H.A. Israr, A.A. Rahman, N.Y. Guan, Z. M. Razlan, N.A. Kamis, W. Khairunizam. Tensile Characterizations of Oil Palm Empty Fruit Bunch (OPEFB) Fibres Reinforced Composites in Various Epoxy/Fibre Fractions. Biointerface Research in Applied Chemistry, 12 (5), 6148-6163.
2021 K.O. Low, M. Johar, H.A. Israr, K.W. Gan, S. Kaloor, M. Petru, K.J. Wong. Displacement Rate Effects on the Mode II Shear Delamination Behavior of Carbon Fiber/Epoxy Composites. Polymers, 13, 1881.
2021 H.A. Israr, K.J. Wong, S. Rivallant. Experimental and numerical investigation of humid ageing effects on CFRP laminates crashworthiness behaviours. Int Journal of Crashworthiness, 26:1, 87-98.
2020 M.S.M Jusoh, M.Y. Yahya, H.A. Israr. Strain rates effect of dynamic compression properties of E-glass / jute composite. Journal of Mechanical Engineering and Sciences, 14(3), 7162-7169.
2019 K.O. Low, S.M. Teng, M. Johar, H.A. Israr a , K.J. Wong. Mode I delamination behaviour of carbon/epoxy composite at different displacement rates. Comp. Part B 176 107293
2019 Z. P Chow, Z. Ahmad, K.J Wong, H. A Israr. Thermo-mechanical characterisation and modelling of GFRP laminated aluminium. Comp. Part B 173 106971
2019 K.W. Gan, Y.W Hoa , Z. Y Owa , H.A Israr, K.J Wong. Aligned discontinuous carbon fibre tows in hybrid composites and their tensile behaviour: An experimental study. Journal of Composite Materials 53 (26–27) 3893–3907
2018 M. Johar, K. O. Low, H. A. Israr & K. J. Wong. Mode I and mode II delamination of a chopped strand mat E-glass reinforced vinyl ester composite. Plastics, Rubber and Composites 47 (9), 391-397.
2018 YSalim, MY Yahya, HA Israr, S Azwan, MN Roslan, MN Abdullah. Oblique impact behavior of unidirectional natural fiber reinforced composites. Journal of advanced and applied sciences, 5(2), 161-164
2017 H.A. Israr, K.J. Wong and M.N. Tamin. Cohesive zone modelling of Mode III delamination using the edge crack torsion test. Journal of Mechanical Engineering and Sciences 11(1) 2426-2438
2017 M. Johar, H.A Israr, K.O Low, K.J Wong. Numerical simulation methodology for mode II delamination of quasi-isotropic quasi-homogeneous composite laminates. Journal of Composite Materials
2017 K.J Wong, H.A Israr, M.N Tamin. Crack Length Dependence of Mode III Delamination Using Edge Crack Torsion Test. International Journal of Mechanical Engineering and Robotics Research 6:3
2017 M.S.M Jusoh, M.Y.M.Yahya, Z. Mustafa, H.A. Israr. Effect of layering pattern on mechanical and water absorption properties of glass/flax reinforced epoxy. Jurnal Teknologi 79:5–2 (2017) 89–93
2017 Israr H.A., Wong K.J., Tamin M.N. (2017) Numerical Simulations of Mixed-Mode II+III Delamination in Carbon/Epoxy Composite Laminate. In: Mohamed Ali M., Wahid H., Mohd Subha N., Sahlan S., Md. Yunus M., Wahap A. (eds) Modeling, Design and Simulation of Systems. AsiaSim 2017. Communications in Computer and Information Science, vol 752.
2016 K.J. Wong, K.O. Low, H.A. Israr, M.N. Tamin. Thickness-dependent non-Fickian moisture absorption in epoxy molding compounds. Microelectronics Reliability 65 (2016) 160–166
2015 K.J. Wong, K.O. Low, H.A. Israr. Impact resistance of short bamboo fibre reinforced polyester concretes. Proc IMechE Part L: J Materials: Design and Applications
2015 K.J. Wong, H.A. Israr, M.N. Tamin. Characterisation of moisture absorption effects on the strength of composite materials. Advanced Materials Research, Vol. 1125, pp. 6973
2014 H.A. Israr, N. Hongkarnjanakul, S. Rivallant, C. Bouvet. Post-impact investigation of CFRP laminated plate. Jurnal Teknologi 71:2, 71-78
2014 H.A. Israr, S. Rivallant, J.J. Barrau. Finite element simulation of 0/90 CFRP laminated plates subjected to crushing using a free-face-crushing concept. Composite Part A 62, 16-25
2013 H.A. Israr, S. Rivallant, J.J. Barrau. Experimental investigation on mean crushing stress characterization of carbon-epoxy plies under compressive crushing mode. Composite Structure 96, 357- 364
Journal Publications (Non-Indexed)
2019 M. Abdullah H.A. Israr, K.J. Wong, K.W. Gan. Tensile Behaviour of Hybrid Composites Between Glass and Short Carbon Fibres. Jurnal Mekanikal 42: 35-42.
2018 H.A. Israr, K.J. Cheng, K.J. Wong, K.W. Gan. Experimental investigation of tensile properties of eco-composite laminates. Jurnal Mekanikal 41, 53-58
2018 H.A. Israr, K.J. Wong, S. Rivallant. Numerical modelling strategies for composite structures crashworthiness: a review. Journal of Advanced Research in Materials Science 42, Issue 1, 8-23
2018 A. Azizan. H.A. Israr, M.N. Tamin. Effect of fiber misalignment on tensile response of unidirectional cfrp composite lamina. Journal of Advanced Research in Applied Sciences and Engineering Technology 11, Issue 1, 23-30
2017 Y. T. M. Calvin, K.J Wong, H. A Israr. Mechanical properties of bamboo and bamboo composites: A Review. Journal of Advanced Research in Materials Science 35, Issue 1 (2017) 7-26
2016 H.A. Israr, M.F. Abdullah, S. Mat. An overview of using unmanned aerial vehicle as an alternative solution for the cloud seeding process. Journal Transport System Engineering 3:1, 1-7
2016 M.S.M Jusoh, C. Santulli, M.Y.M Yahya, N.S Hussein, H.A Israr. Effect of stacking sequence on the tensile and flexural properties of glass fibre epoxy composites hybridized with basalt, flax or jute fibres. Mater. Sci. Eng. Adv. Res 1(4).
2016 M.R.A. Hutagalung, A.A. Latif, H.A. Israr. Structural design of uav semi-monoque composite wing. Journal Transport System Engineering 3:1, 26-34
2016 C. T.M. Yap a, H.A. Israr*,b, K.J. Wong c and M.Y. Yahya. Compressive Properties of Hawaiian Gold Timber Bamboo under Different Conditions. Journal of Advanced Research in Applied Mechanics Vol. 25, No. 1. Pages 10-18
2015 H.A. Israr, M.F. Kassim, K.J. Wong, M.Y. Yahya. Experimental investigation of pure bamboo plate under quasi-static indentation test. Journal Transport System Engineering 2:3, 25-30
RESEARCHER ID:
Scopus : https://www.scopus.com/authid/detail.uri?authorId=55425727000
Orcid : https://orcid.org/0000-0002-5932-5024
Google Scholar : https://scholar.google.com/citations?user=hwUw7EUAAAAJ&hl=en
Research Gate : https://www.researchgate.net/profile/Haris-Ahmad-Israr
