Conference / Proceedings

 

  1. Izwan Hamid, Mohd Farid Muhamad Said, Mohd Fadziel Mohamad Nor, Zulkarnain Abdul Latiff, Investigation of Cylinder Deactivation strategies for better fuel consumption using 1-D Simulation Method, The 8th International Meeting on Advances in Thermofluids (IMAT 2015), 11 ~ 12 November 2015. 
  2. Abdul Rahim Shar Anuar, Mohd Farid Muhamad Said, Azhar Abdul Aziz, Zulfaqih Lazim, Investigation into the Selection of an Appropriate Piston Head Geometry for a Spark Ignition Engine Equipped Direct-Fuel Injector, The 8th International Meeting on Advances in Thermofluids (IMAT 2015), 11 ~ 12 November 2015.
  3. Izzarief Zahari, Mohd Farid Mohamad Said and Srithar Rajoo, Flow  Characterization  of  Complete  Air  Induction  System  in   Internal  Combustion  Engine, The 13th Asian International Conference on Fluid Machinery (AICFM 2015). 7th – 10th September 2015, Tokyo, Japan.
  4. A. Mohamad Shafie, M.F. Muhamad Said, Z. Abdul Latiff, S. Rajoo, Discharge and Flow Coefficient Analysis in Internal Combustion Engine using Computational Fluid Dynamics Simulation, International Conference on Computational Fluid Dynamics in Research & Industry 2015 (CFDRI 2015), 17 ~ 19 August 2015.
  5. Mohd Aizad Sazrul Sabrudin, Mohd Farid Muhamad Said, Zulkarnain Abdul Latiff, Effects of Asymmetric Intake Valve Lift Configuration Towards In-Cylinder Air Flow Behavior, International Conference on Computational Fluid Dynamics in Research & Industry 2015 (CFDRI 2015), 17 ~ 19 August 2015.
  6. F. Zainal Abidin, M.F. Muhamad Said, A.A. Aziz, M. A. Abas, N.I. Arishad, Investigation of Performance and Fuel Economy for Cylinder Deactivation Engine at Part Load Operation, 7th International Meeting of Advances in Thermofluids (7th IMAT 2014). Swiss-Garden Hotel & Residences, Kuala Lumpur, Malaysia, 26 ~ 27 November 2014.
  7. A. Abas, M.F. Muhamad Said, Z. Abdul Latiff, S.F. Zainal Abidin, I. Zahari, Establishing Engine Conditions for Fuel Economy Measurements in Malaysian Urban Driving, International Conference on Autmotive Innovation and Green Vehicle (AIGEV 2014). Swiss Garden Resort & Spa Kuantan, Malaysia, 26 ~ 27 August 2014
  8. M.F. Muhamad Said, Z. Abdul Latiff, S.F. Zainal Abidin, I. Zahari, M. Said, Investigation of Intake Valve Strategy on the Cylinder Deactivation Engine, 6th International Meeting of Advances in Thermofluids (6th IMAT 2013). National University of Singapore (NUS), Singapore, 18 ~ 19 November 2013.
  9. M.F. Muhamad Said, Z. Abdul Latiff, A. Saat, M. Said, S.F. Zainal Abidin. Improve Gasoline Engine Performance by Studying The Effect of Intake System Design. 2013 JSAE Annual Congress (Spring), Pacifico Yokohama, JAPAN, JSAE Paper Number: 20135281, 22 ~ 24 May 2013
  10. Bahram Bahri, Azhar Abdul Aziz, Mahdi Shahbakhti, Mohd Farid Muhamad Said, A Diagnosis Technique for the Identification of Misfire in a Converted-diesel HCCI Engine. Latest Trends in Circuits, Control and Signal Processing, Kuala Lumpur, Malaysia, 2 ~ 4 April 2013.
  11. Amin Mahmoudzadeh Andwari, Azhar Abdul Aziz,F. Muhamad Said, Z. Abdul Latiff, Controlled Auto-Ignition (CAI) Combustion In A Two-Stroke Cycle Engine Using Hot Burned Gases. 5th International Meeting of Advances in Thermofluids (5th IMAT 2012). Bintan Island, Indonesia, 12 ~ 13 November 2012.
  12. Aminuddin Saat, Mazlan Abdul Wahid, Mohd Farid Muhamad Said, Early Flame Development in the Combustion of Droplet and Vapour Mixtures, 5th International Meeting of Advances in Thermofluids (5th IMAT 2012). Bintan Island, Indonesia, 12 ~ 13 November 2012.
  13. Khurram Kamal, Mohammad Farid, Senthan Mathavan, Detection of Knocking in Spark Ignition (SI) Engines using CMAC Neural Networks, 2012 international Conference on Robotics and Artificial Intelligence (ICRAI). Rawalpindi, Pakistan, 22 ~ 23 October 2012.
  14. Bahram Bahri, Azhar Abdul Aziz, Mohd Farid Muhamad Said, Mahdi Shahbakhti. Artificial Neural Network Model for Predicting Exhaust Temperature of an Ethanol-Fueled HCCI Engine. 2012 JSAE Annual Congress (Spring), Pacifico Yokohama, JAPAN, JSAE Paper Number: 20125168, 23 ~ 25 May 2012.
  15. F. Muhamad Said, M. Said, A. Abdul Aziz., Modelling of Diesel Engine fuelled with biodiesel using Engine Simulation Software. International Meeting of Advances in Thermofluids (4th IMAT 2011). Melaka, Malaysia, 3 ~ 4 October 2011.
  16. Said, A. Abdul Aziz, M.F. Muhamad Said, Effect of Palm Methyl Ester – Diesel Blends Performance and Emission of a Single-Cylinder Direct-Injection Diesel Engine. International Meeting of Advances in Thermofluids (4th IMAT 2011). Melaka, Malaysia, 3 ~ 4 October 2011.
  17. F. Muhamad Said and A. Aroussi. On-Line Measurement of Droplet Size using Digital Imaging Analysis Techniques. The 14th International Symposium on Flow Visualization. Daegu, Korea, 21 ~ 24 June 2010.
  18. F. Muhamad Said, A. Aroussi and N. Lad. Droplet Size Measurement for Liquid Spray using Digital Image Analysis Technique. The 2nd International Conference on Plant Equipment and Reliability (ICPER2010). Kuala Lumpur, 15 ~ 17 June 2010
  19. Aroussi, F. Muhamad Said, and N. Lad. The Design of a Spray Characteriser. 4th Algerian Congress of Process Engineering 2009. Algiers, Algeria, 2009.
  20. F. Muhamad Said, N. Lad, and A. Aroussi. Impingement of a Liquid Spray on a Convex Surface. 4th Algerian Congress of Process Engineering 2009. Algiers, Algeria, 2009.
  21. F. Muhamad Said and A. Aroussi. An On-Line Particle Characterisation Device. The 3rd International Conference on Mechatronics (ICOM’08). Kuala Lumpur, Malaysia, 2008.
  22. F. Muhamad Said and A. Aroussi. A Non-Intrusive Spray Characteriser. The 4th International Symposium on Hydrocarbons and Chemistry. Ghardaia, Algeria, 2008.
  23. Azhar Abdul Aziz, Mohd Farid Said, Mohamad Afiq Awang, Mazlan Said. The Effects of Neutralized Palm Oil Methyl Esters (NPOME) on Performance and Emission of a Direct Injection Diesel Engine. Regional Conference on Vehicle Engineering and Technology (RiVET 2006). PWTC, Kuala Lumpur, Malaysia. 3 – 5 July 2006.
  24. Azhar Abdul Aziz, Mohd Farid Said and Mohamad Afiq Awang, Performance and Emission Evaluations of Palm Oil-Based Biodiesels with Conventional Diesel using Single Cylinder Direct Injection Engine, The 11th Small Engine Technology Conference, Bangkok, Thailand, SAE paper 2005-32-0016, October 2005.
  25. Azhar Abdul Aziz, Mohd Farid Said and Mohamad Afiq Awang, Performance of Palm Oil-Based Biodiesel Fuels in a Single Cylinder Direct Injection Engine, Palm Oil Developments, No. 42, June 2005.
  26. Azhar Abdul Aziz, Mohd Farid Said and Mohamad Afiq Awang, Laboratory Evaluation of Palm Oil-Based Biodiesel with Conventional Diesel using Single Cylinder Direct Injection Engine, 2004 MPOB National Seminar on Green and Renewable Biofuel, Kuala Lumpur, Malaysia 2004.
  27. Azhar Abd Aziz, Mohd Farid Said & Zulkarnain Latiff, Single-Cylinder Step Piston Engine Design Using Engine Simulation Software, CDAJ User’s Meeting 2004, Yokohama, Japan, 2004.