Journal Papers

ISI Journal :

  1. Mohebbi, M., Reyhanian, M., Hosseini, V., Muhamad Said, M.F., Aziz, A.A., Performance and emissions of a reactivity controlled light-duty diesel engine fueled with n-butanol-diesel and gasoline, Applied Thermal Engineering, 2018.134: p. 214-228, (Q1, IF = 3.36)
  2. Ghanaati, A., Muhamad Said, M.F., Darus, I. Z. M., Comparative analysis of different engine operating parameters for on-board fuel octane number classification, Applied Thermal Engineering, 2017.124: p. 327-336, (Q1, IF = 3.634)
  3. Amin Mahmoudzadeh Andwari, Azhar Abdul Aziz, Mohd Farid Muhamad Said, Zulkarnain Abdul Latiff, Experimental investigation of the influence of internal and external EGR on the combustion characteristics of a controlled auto-ignition two-stroke cycle engine, Applied Energy, 2014.134:p. 1-10, (Q1, IF = 6.33)
  4. Andwari, A.M., A. Abdul Aziz, F. Muhamad Said, and Z. Abdul Latiff, An experimental study on the influence of EGR rate and fuel octane number on the combustion characteristics of a CAI two-stroke cycle engine. Applied Thermal Engineering, 2014. 71(1): p. 248-258, (Q1, IF = 3.034).
  5. Bahri, B., A.A. Aziz, M. Shahbakhti, and F. Muhamad Said, Understanding and detecting misfire in an HCCI engine fuelled with ethanol. Applied Energy, 2013. 108: p. 24-33, (Q1, IF = 5.597)
  6. Bahri, B., A.A. Aziz, M. Shahbakhti, and F.M. Said, Analysis and modeling of exhaust gas temperature in an ethanol fuelled HCCI engine. Journal of Mechanical Science and Technology, 2013. 27(11): p. 3531-3539, (Q3, IF = 0.743)

 

SCOPUS Journal :

  1. Andwari, A.M., Aziz, A.A., Said, M.F.M., Esfahanian, V., Latiff, Z.A., Said, S.N.M.., Effect of internal and external EGR on cyclic variability and emissions of a spark ignition two-stroke cycle gasoline engine, Journal of Mechanical Engineering and Sciences, Vol 11(4), (2017), p. 3004-3014.
  2. Dahlan, A.A., Shahrafi, M., Muhamad Said, M.F., Simulation of intake and exhaust valve timing on internal combustion engine, Jurnal Teknologi 79 (2017), no. 7-4, 47-52.
  3. Mohammad, M., Buang, M.M.A., Dahlan, A.A., Khairuddin, M.H., Muhamad Said, M.F., Simulation of automotive exhaust muffler for tail pipe noise reduction, Jurnal Teknologi 79 (2017), no. 7-4, 37-45.
  4. Shafie, N. A. M., Said, M. F. M., Cold flow analysis on internal combustion engine with different piston bowl configurations, Journal of Engineering Science and Technology, Vol 12(4), (2017), p. 1048-1066.
  5. Khairuddin, M.H., Bahri, M.F.S., Dahlan, A.A., Mohammad, M., Muhamad Said, M.F., Simulation analysis of spark ignition engine intake manifold for better performance, Jurnal Teknologi 79 (2017), no. 7-4, 15-21.
  6. Sabrudin, M. A. S., Said, M. F. M., Latiff, Z. A., Effects of asymmetric intake valve lift configuration towards in-cylinder air flow behavior, ARPN Journal of Engineering and Applied Sciences, Vol 12(7), (2017), p. 2380-2384.
  7. Mohamad Shafie, N. A., Muhamad Said, M. F., Abdul Latiff, Z., Rajoo, S., Discharge and flow coefficient analysis in internal combustion engine using computational fluid dynamics simulation, ARPN Journal of Engineering and Applied Sciences, Vol 12(8), (2017), p. 2598-1603.
  8. Sumeru, C. Sunardi, A. Abdul Aziz, H. Nasution, A. M. Abioye and M. F. Muhamad Said, Comparative performance between R134a and R152a in an air conditioning system of a passenger car, Jurnal Teknologi 78 (2016), no. 10-2, 1-6.
  9. Hamid, M. F. M. Said, S. N. M. Soid and H. Nasution, Effect of cylinder deactivation strategies on engine performances using one-dimensional simulation technique, Jurnal Teknologi 78 (2016), no. 8-4, 49-55.
  10. A. Aziz, K. Sumeru, M. F. Muhammad Said, M. R. Mohd Perang and H. Nasution, Single-cylinder 125 cc stepped-piston engine for mobility and portable power generation applications, International Journal of Technology 7 (2016), no. 2, 352-361.
  11. R. S. Anuar, M. F. M. Said, N. A. M. Shafie, A. A. Aziz and H. Nasution, Flow analysis of piston head geometry for direct injection spark ignition engine, Jurnal Teknologi 78 (2016), no. 8-4, 81-88.
  12. Andwari, A.M, Aziz, A.A., Said, M.F.M., Latiff, Z.A., Ghanaati, A., Influence of hot burned gas utilization on the exhaust emission characteristics of a controlled auto-ignition two-stroke cycle engine, International Journal of Automotive and Mechanical Engineering, Volume 11, Issue 1, 2015, Pages 2396-2404.
  13. F. Zainal Abidin, M. F. Muhamad Said, Z. Abdul Latiff, I. Zahari and M. Said, The study of the effect of intake valve timing on engine using cylinder deactivation technique via simulation, Jurnal Teknologi 77 (2015), no. 8, 107-111.
  14. Abas, M.A., Muhamad Said, M.F., Zainal Abidin, S.F., Zahari, I., Simulation of fuel economy for Malaysian urban driving, International Journal of Automotive and Mechanical Engineering, Volume 11, Issue 1, 2015, Pages 2306-2316.
  15. Ghanaati, A., Mat Darus, I.Z., Muhamad Said, M.F., Mahmoudzadeh Andwari, A., A mean value model for estimation of laminar and turbulent flame speed in spark-ignition engine, International Journal of Automotive and Mechanical Engineering, Volume 11, Issue 1, 2015, Pages 2224-2234.
  16. Said, N.H., Ani, F.N., Said, M.F.M., Review of the production of biodiesel from waste cooking oil using solid catalysts, Journal of Mechanical Engineering and Sciences, Volume 8, 1 June 2015, Pages 1302-1311.
  17. Abu Bakar, S.A., Muhamad Said, M.F., Aziz, A.A., Ride comfort performance evaluations on electric vehicle conversion via simulations, ARPN Journal of Engineering and Applied Sciences, Volume 10, Issue 17, 2015, Pages 7794-7798.
  18. Muhamad Said, M.F and Aroussi, A, Utilization of pulverised coal monitoring system for cleaner electricity generation. International Journal of Automotive and Mechanical Engineering, 2014. Vol 9, Issue 1, pg. 1588-1598.
  19. Zahari, I., M.A. Abas, N.I. Mat Arishad, S.F. Zainal Abidin, and F. Muhamad Said, Experimental study to identify common engine part load conditions between Malaysian city driving and NEDC test. International Review of Mechanical Engineering, 2013. 7(6): p. 1152-1158.
  20. Bahri, B., A.A. Aziz, M. Shahbakhti, and F. Muhamad Said, Misfire detection based on statistical analysis for an ethanol fueled HCCI engine. International Review of Mechanical Engineering, 2012. 6(6): p. 1276-1282.
  21. Lad, N., A. Aroussi, and F.M. Said, Droplet size measurement for liquid spray using digital image analysis technique. Journal of Applied Sciences, 2011. 11(11): p. 1966-1972.
  22. Lad, N., F. Muhamad Said, A. Aroussi, and D. Adebayo, Experimental and computational characterisation of atomised spray flow around a circular cylinder. Progress in Computational Fluid Dynamics, 2010. 10(4): p. 232-238.
  23. Aroussi, A., N. Lad, M.F. Muhamad Said, D. Adebayo, and M. Al-Atabi, The interaction of a cold atomised spray with a circular cylinder. Journal of Engineering Science and Technology, 2010. 5(3): p. 361-372.