Conference Proceedings

  • N. Aufa, Mohamad Zaki Hassan & Zarini Ismail, Sol-Gel Surface Enhancement of Pure Magnesium (Mg) for Biocompatibility Implant Applications, Universiti Teknologi Malaysia, Johor Bahru, Malaysia, 29 – 30 June 2021
  • Mohd Faizal Sadali, Mohamad Zaki Hassan, Robiah Ahmad & Nurul Haziatul Norhasnan, Laser Power Implication to the Hardness of Ti6Al4V Powder by Using SLM Additive Manufacturing Technology, Proceedings of Mechanical Engineering Research Day 2020, Universiti Teknikal Malaysia Melaka (UTeM), Melaka, 16 December 2020
  • Ikhwan Ibrahim, Mohamad Zaki Hassan, Sa’ardin Abd Aziz, Sallehuddin Muhamad, Abdul Yasser Fatah & Noorazizi Samsuddin The Effect of Chemical Treatment on The Tensile Behaviour of Kenaf Fibre Using Box-Behnken Design, Proceedings of Mechanical Engineering Research Day 2020, Universiti Teknikal Malaysia Melaka (UTeM), Melaka, 16 December
  • T Jamil, Siti Amni Roslan, Zainudin A Rasid & Mohamad Zaki Hassan, Experimental And Simulation of Aerodynamic Performance of The Small-Scale Wind Turbine Blades For Usage In Malaysia, The 2nd International Conference on Innovative Technology, Engineering And Sciences (ICITES 2020) 22 December 2020
  • N H Mohd Azman, Z Yusof, Hafizal Yahya, Zainudin A Rasid, Mohamad Zaki Hassan & F Yakub, Whirling Frequencies of Rotor Systems Using Ansys Apdl, 5th International Conference on Advanced Technology & Applied Sciences and 6th Malaysia-Japan International Conference (ICaTaS-MJJIC 2020), Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia 7 – 9th October
  • F A Mat Kasim, S A H Roslan, Z A Rasid, F Yakub, Mohamad Zaki Hassan & H Yahaya, Post-Buckling of Bamboo Reinforced Composite Plates, International Conference on Applied Technology and Applied Science (ICATAS 2020) Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia, 7 – 9th October
  • S Mohd Sabee, N Yusof, Z A Rasid, H Yahaya, F Yakub, & Mohamad Zaki Hassan, Progressive Failure Analysis of Laminated Composite Plates, International Conference on Applied Technology and Applied Science (ICATAS 2020) Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia 7 – 9th October 2020
  • Hazilah Kaidi, Nabil Muhtazarudin, Shamsul Sarip, NA Bani, & Mohamad Zaki Hassan, Harvesting Sustainable Energy from Saltwater: Part II – Effect of Electrode Geometry 5th International Conference on Energy and Environment (ICEE2019), Bangi, Malaysia, 10-11 July 2019
  • Mohamad Zaki Hassan, S. M. Sapuan, S. A. Roslan, A. R. Zainudin, M. F. Sadali, M. Y. Zuhri, S. A. Aziz & S. Sarip, Parametric Optimization For Natural Fibre And Biocomposite Using Box-Behnken Design: A Review, Prosiding Seminar Enau Kebangsaan, Port Dickson Negeri Sembilan, 12 April 2019
  • Mohd Zuhri Mohamed Yusoff, Muhammad Asyraf Nasrudin, Mohd Sapuan Salit, & Mohamad Zaki Hassan, Effect of cell size on the compressive properties of interlocking flax composite structures, Proceedings of Mechanical Engineering Research Day 2018, Universiti Teknikal Malaysia Melaka (UTeM), Melaka, 16 May 2018
  • A. H. Roslan, Zainudin A Rasid, Mohamad Zaki Hassan, Hafizal Yahya, Parametric Study On Dynamic Instability Of Fully Anisotropic Composite Plates, 1st International Conference on Enhanced Research and Industrial Application, Bali, Indonesia 17 October 2018.
  • A. H. Roslan, Mohamad Zaki Hassan, Ikhwan Ibrahim Zainudin A Rasid, Mode I Fracture Toughness Of Optimized Alkali Treated Bambusa Vulgaris Bamboo By Box Behnken Design, 4TH International Conference On Mechanical, Manufacturing And Plant Engineering, Melaka, Malaysia, 14 -15 November 2018.
  • Roslan, S. A. H., Yusof, Z, Rasid, Z. A, Yahaya, M. H, & Mohamad Zaki Hassan Dynamic Instability Response of Smart Composite Material, 4th International Conference on Mechanical, Manufacturing and Plant Engineering, Melaka, Malaysia, 14 – 15 November
  • Hazilah Kaidi, M A Suhot, R Musa, RA Dziyauddin, NA Bani, & Mohamad Zaki Hassan, A Pilot Study of Malnutrition Among Elderly In A Malaysia Elderly Care Centre – Part I: Assessment of Handgrip Strength Measurement, 2nd International Conference on Biosignal Analysis, Processing And Systems (ICBAPS) Kuching, Malaysia 24-26 July 2018
  • M F Sadali & Mohamad Zaki Hassan. Tensile Behaviour of Polylactic Acid Strut For 3D Filament Printing International Graduate Conference On Engineering, Science And Humanities, Universiti Teknologi Malaysia, Johor Bahru, Malaysia. 13 -15 August 2018
  • Mohamad S. Ibrahim, Mohamad Zaki Hassan, Ikhwan Ibrahim, Mohd Y. Daud, & Mohamad H. Ibrahim, Life Assessment Of Street Lantern Using Weibull Probability Technique Universiti Teknologi Malaysia, Johor Bahru, Malaysia 13 -15 August 2018
  • Mahendren Subramaniam, Mohamad Zaki Hassan, Mohamad Haziq Ibrahim, Mohd Yusof Daud, Sa’ardin A. Aziz & Shamsul Sarip, Assessment Occupational Noise Exposure For Manufacturing Industry, Proceeding 7th International Graduate Conference on Engineering, Science And Humanities (IGCESH) Universiti Teknologi Malaysia, Johor Bahru, Malaysia 13 -15 August 2018
  • Palani Samy Alagapan, Mohamad Zaki Hassan, Ikhwan Ibrahim, & Rasheed Mohamed Kutty, Evaluation Of Noise Exposure In Manufacturing Industry, Proceeding 7th International Graduate Conference On Engineering, Science And Humanities (IGCESH) Universiti Teknologi Malaysia, Johor Bahru, Malaysia 13 -15 August
  • Zulkarnain Bazid, Mohd Yusof Md Daud, Mohamad Zaki Hassan, & Norazmein Abdul Raman Biocide Substance Awareness Among Employees of A Chemical Supply Company In Malaysia, Universiti Teknologi Malaysia, Johor Bahru, Malaysia 13 -15 August 2018
  • Shamsul Sarip, Mohd Yusof Md Daud, & Mohamad Zaki Hassan, Critical Design Factors on Performance of Car Jack Lifting Operations, 12th International Power Engineering, Optimization and Computing Conferencing, Langkawi, Kedah, Malaysia, 14- 15 Jul
  • P Alagapan, Mohamad Zaki Hassan, MH Ibrahim, MY Daud, & R M Kutty, Measurement Of Hazardous Personal Noise Exposure In Spice Manufacturing Industry International Conference On Mechanical And Manufacturing Engineering 2018, 16 – Universiti Teknologi Malaysia Johor Bahru, Malaysia, 17 July 2018,
  • MS Ibrahim, M Ibrahim & Mohamad Zaki Hassan, Life-cycle Assessment on the Highway Street Lantern using Weibull Probability Approach, 9th International Conference on Mechanical and Manufacturing Engineering 2018 (ICME 2018), UTHM, Batu Pahat, Johor Malaysia, 18, August 2018
  • Roslina Mohammad, Habibah Harun, Hayati A Talib, Rasheed M Kutty, Saardin Aziz, M Azlan Suhot, & Shamsul Sarip, Innovative Teaching And Learning Using A Novel Pico Hydro Turbine Kit, Proceeding Of New Academia Learning Innovation (Nali 2018) Exhibition & Competition Skudai Johor Bahru Malaysia, 25-26 September 2018
  • Roslina Mohammad, Habibah Harun, Hayati A Talib, Rasheed M Kutty, Saardin Aziz, Mohamad Zaki Hassan, M Azlan Suhot, & Shamsul Sarip, Fun Learning Toy Library As A Passage to Shape Future Scientists and Engineers, Proceeding Of New Academia Learning Innovation (Nali 2018) Exhibition & Competition Skudai Johor Bahru Malaysia, 25-26 September
  • Roslina Mohammad, Habibah Harun, Hayati A Talib, Rasheed M Kutty, Saardin Aziz, Mohamad Zaki Hassan, M Azlan Suhot, & Shamsul Sarip, Grooming Future Scientists And Engineers From The Root Through Fun Learning Concept, The 2ndInternational Conference Of Women In Science, Engineering And Technology (WISET 2018) Kuala Lumpur, Malaysia, 17-19 July
  • M Ibrahim & Mohamad Zaki Hassan, The Weibull Probabilities Analysis on the Single Kenaf Fiber, International Conference on the Science and Engineering of Materials 2017, Universiti Teknologi Malaysia Johor Bahru, Malaysia, 24-25 October
  • M Haziq Ibrahim & MZ Hassan, The Effect of Seawater Infiltration Towards Thermal Gradation on of Fibre Reinforced Epoxy Composites, International Conference on the Science and Engineering of Materials 2017, Universiti Teknologi Malaysia Johor Bahru, Malaysia, 24-25 October
  • Zarina Muhamad, Zainudin A Rasid, & Mohamad Zaki Hassan, The Numerical Modelling On The Parametric Instability Improvement of Laminated Composite Plate With Embedded Smart Material International Conference on Science, Technology, Engineering And Mathematics 2017, 17th-19th October 2017
  • Nurihan Omar, Zainudin A Rasid, & Mohamad Zaki Hassan, Tensile Behaviours of Single-Walled Carbon Nanotube International Conference on Mechanical, Manufacturing And Process Plant Engineering (ICMMPE 2017), Batu Ferringhi, Penang, 22–23 November 2017,
  • MY Zuhri, MS Sapuan, & Mohamad Zaki Hassan, The Effect Of Varying Pressure On Mechanical Performance Of Pineapple Leaf Fiber Reinforced Poly-Lactic Acid Biocomposites, Proceedings Of Mechanical Engineering Research Day 2017, Melaka, Malaysia, 30 March 2017
  • Siti Nur Fatin Zuikafly, Fauzan Ahmad, E A Mohamed Zalehan, & Mohamad Zaki Hassan, Multiwalled Carbon Nanotubes Polymer Composites With Low Threshold Input Pump Power For Q Switched Pulse Laser Generation, 2nd Composite Materials And Manufacturing Symposium, Universiti Teknologi Malaysia Kuala Lumpur, Malaysia 13-14 November
  • A. H. Roslan, N. A. D. Muhalim, Fauzan Ahmad, & Mohamad Zaki Hassan, A Review on Chemical Treatments of Natural Fibre In Reinforced Polymer Composites, 2nd Composite Materials And Manufacturing Symposium, Universiti Teknologi Malaysia Kuala Lumpur, Malaysia 13-14 November 2016
  • A. D. Muhalim, Y. Daud, M. Z. Hassan, S. Sarip, N. A. Raman & S. A. Aziz, Mechanical properties of quasi-static and ultrasonic compression of copper tube, Advanced Processes and Systems in Manufacturing International Conference 2016 (APSIM 2016), Kuala Lumpur, 28- 30 Aug 2016.
  • A. D. Muhalim, Y. Daud, M. Z. Hassan, S. Sarip, N. A. Raman & S. A. Aziz, Mechanical Properties Of Ultrasonic-Assisted Compression Of Polyvinyl Chloride Foam, 2nd Composite Materials and Manufacturing Symposium, Kuala Lumpur, Malaysia on. 13-14 November 2016
  • Shamsul Sarip, Mohd Yusof Md Daud, Mohamad Zaki Hassan, & Mohamad Azlan Suhot, The Potential Of Micro-Hydropower Plant For Orang Asli Community In Royal Belum State Park, Perak, Malaysia, Symposium On The 4th Royal Belum Scientific Expedition, Gerik Perak, 22 May 2015
  • Daud, Mohamad Zaki Hassan, S. Sarip, S. A. Aziz, N.A.D. Muhalim, N. A. Raman & K. R. Jamaluddin, Mechanical properties of quasi-static and ultrasonic compaction of stainless steel powder metallurgy, International Conference on Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia (UTHM) 19-21 October 2015.
  • Nadia Bakhori, Mohamad Zaki Hassan, Shamsul Sarip, & Norazmein Raman, Mechanical Behavior of Kenaf/Epoxy Corrugated Sandwich Structures, 3rd International Conference on Mechanical Engineering Research (ICMER), Zenith Hotel, Kuantan, Pahang, 18-19 Aug 2015
  • Mohamad Azlan Suhot, & Mohamad Zaki Hassan, Tensile Strength Polymer Matrix Composite With Reinforcement Gigantochloa Apus, 2nd International Conference on Engineering of Tarumanagara, Tarumanagara Universiti, Jakarta-Indonesia 22-23 October 2015
  • M.S. Abu Bakar, Mohamad Zaki Hassan, S. Bakhori, M.Y.M. Daud, S. Sarip & Z. Ismail, Improvement of Universal Parts for Pick and Place Machine in Semiconductor Industry using QFD Approach, International Conference on Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia (UTHM) 19-21 October 2015.
  • S.A.M Sapawi, A.Abu, A.L. Moe, & Mohamad Zaki Hassan, Mechanical Behaviour of Hybrid Jute/Flax Epoxy Composites, International Workshop in Plasma Application & Hybrid Function Material, Hawaii, 24 March 2015
  • S. Bakhori, Mohamad Zaki Hassan, Y. Daud, S. Sarip, N. Rahman, Z. Ismail, & S. A. Aziz, Mechanical behaviour of kenaf/epoxy corrugated sandwich structure composites, International Conference on Mechanical Engineering Research, Universiti Malaysia Pahang (UMP), 18-19 August 2015
  • S. A. H. Roslan, Mohamad Zaki Hassan, Z. A. Rasid, S. A. Zaki, Y. Daud, S. Aziz, S. Sarip & Z. Ismail, Mechanical properties of bamboo reinforced epoxy sandwich structure composites, International Conference on Mechanical Engineering Research, Universiti Malaysia Pahang (UMP), 18-19 August 2015
  • Nadia Bakhori, Mohamad Zaki Hassan, & Mohd Yusof Mohd Daud, Mechanical Behavior of Hybrid Jute/Flax Epoxy Composite, 7th International Workshop on Plasma Application and Hybrid Functional Materials, Kuala Lumpur (MJIIT), Malaysia, 7th-10thMarch 2014
  • S. Sarip, Mohamad Zaki Hassan, & S. A. Aziz, Energy Management Strategies At Emergency Department Block C Hospital Sungai Buloh, 3rd International Conference on Engineering Business Management (ICEBM 2014) Kuala Lumpur, Malaysia, June 30, 2014.
  • S. Sarip, M. Z. Hassan, N. A. Raman, S. A. Aziz, M. Y. M. Daud & M. A. Z. Abidin, Micro hydropower generation in rural and remote areas: development of crossflow turbine, National Conference on Royal Belum 2014, Perak, Malaysia, 09-10 Dec 2014.
  • S. Sarip, Mohamad Zaki Hassan, M. Yusof M. Daud Renewable Energy Harness To Uplift The Prosperity Of Royal Belum Forest, National Conference on Royal Belum 2014, Perak, Malaysia, 09-10 Dec 2014.
  • Langdon GS, Mohamad Zaki Hassan, Cantwell WJ, & Nurick GN. Response of blast loaded foam core sandwich panels. In: Ferreira A, editor. International Conference on Mechanics of Nano, Micro and Macro Composite Structures Politecnico di Torino Italy
  • Mohamad Zaki Hassan, & Cantwell WJ. The impact response of fullyrecyclable sandwich structures. In: Beral B, editor. SEICO 10 Conférence de SAMPE Europe; Paris Porte de Versailles 2010
  • Mohamad Zaki Hassan, & Cantwell An investigation into the fracture properties of all-polypropylene sandwich structures. In: Torre L, editor. SEICO 09 Conférence de SAMPE Europe; Paris Porte de Versailles 2009.