Calendar for us
Categories
Archives
-
Recent Posts
OZBIONY
CREG
Biodiesel
Tags
Blogroll
Monthly Archives: January 2018
Methane to Liquid Fuels over Metal Loaded HZSM-5 Catalyst
Abstract: ZSM-5 zeolite is an acidic catalyst that is highly potential for the conversion of natural gas to liquid fuels. One of the variables that controls the acidity of the ZSM-5 is its Si/Al ratio. Loading the ZSM-5 zeolite with … Continue reading
Posted in 2011
Leave a comment
Optimization Studies for Catalytic Ozonation of Cephalexin Antibiotic In A Batch Reactor
Abstract: This study examines the effect of pH of solution, cephalexin (CEX) concentration, and O3 dosage on removal of CEX by catalytic ozonation. All three parameters were found to exert a significant effect on the removal of cephalexin and on … Continue reading
Posted in 2012
Leave a comment
Optimization of Hydrodesulfurization Activity in the Hydrotreating Process: Canonical Analysis and the Combined Application of Factorial Design and Response Surface Methodology
Abstract: This study is aimed at investigating the interactive effects of reaction parameters such as temperature (330–370 °C), total pressure (30–50 bar) and liquid hourly space velocity LHSV (1–3 h−1) on the performance of hydrodesulfurization (HDS) activity. Experiments were performed based on the … Continue reading
Posted in 2012
Leave a comment
Catalyst Screening for Conversion of Glycerol to Light Olefins.
Abstract: Screening of modified ZSM-5 catalysts for conversion of glycerol to light olefins has been investigated. In this study HZSM-5, Al/ZSM-5, Ca/ZSM-5, Cr/ZSM-5, Cu/ZSM-5, Li/ZSM-5, Mg/ZSM-5 and Ni/ZSM-5 zeolite catalysts were prepared, tested and screened. The catalysts were characterized to … Continue reading
Posted in 2012
Leave a comment
Optimization of Levulinic Acid from Lignocellulosic Biomass Using a New Hybrid Catalyst.
Abstract: Conversion of glucose, empty fruit bunch (efb) and kenaf to levulinic acid over a new hybrid catalyst has been investigated in this study. The characterization and catalytic performance results revealed that the physico-chemical properties of the new hybrid catalyst … Continue reading
Posted in 2012
Leave a comment
A Review on Operating Parameters for Optimum Liquid Oil Yield in Biomass Pyrolysis
Abstract: Pyrolysis is one of the potential routes to harness energy and useful chemicals from biomass. The major objective of biomass pyrolysis is to produce liquid fuel, which is easier to transport, store and can be an alternative to energy … Continue reading
Posted in 2012
Leave a comment
An overview of ionic liquids as solvents in biodiesel synthesis
Abstract: Transesterification is the most common method for producing biodiesel. Known as a suitable substitute to diesel fuel, the synthesis involves renewable sources as feedstock. Application of both organic and inorganic solvents in biodiesel production has been widely established. However, … Continue reading
Posted in 2012
Leave a comment
Continuous Production of Biodiesel from Waste Cooking Oil in a Reactive Distillation Column Catalyzed by Solid Heteropolyacid: Optimization Using Response Surface Methodology (RSM)
Abstract: This study aims to develop an optimal continuous process to produce fatty acid methyl esters (biodiesel) from waste cooking oil in a reactive distillation column catalyzed by a heteropolyacid, H3PW12O40·6H2O. The conventional production of biodiesel in the batch reactor … Continue reading
Posted in 2012
Leave a comment
Bio-Oils and Diesel Fuel Derived from Alkaline Treated Empty Fruit Bunch (EFB).
Abstract: In this work, EFB was chemically pretreated with different sodium hydroxide (NaOH) concentration. Pyrolysis was conducted in the presence of HZSM-5 after the pretreatment step to assess the effects of pretreatment process on bio-oil production. Conversions of EFB were … Continue reading
Posted in 2012
Leave a comment
Synthesis and characterization of renewable carbon cryogel beads from empty fruit bunch (EFB)
Abstract: In this study, liquefaction between empty palm fruit bunch (EPFB) and phenol was carried out by using sulfuric acid and H2SO2 as a catalyst. The liquefied products were reacted with formaldehyde to synthesize resin and undergo sol-gel impregnation (Sl) … Continue reading
Posted in 2012
Leave a comment