Carbon cryogel microsphere for ethyl levulinate production: Effect of carbonization temperature and time

ABSTRACT:

The side products of biomass and bio-fuel industry have shown potential in producing carbon catalyst. The carbon cryogel was synthesized from lignin-furfural mixture based on the following details: 1.0 of lignin to furfural (L/F) ratio, 1.0 of lignin to water (L/W) ratio, and 8M of acid concentration. The lignin-furfural sol-gel mixture, initially prepared via polycondensation reaction at 90 °C for 30 min, was followed by freeze drying and carbonization process. Effects of carbonization temperature and time were investigated on the total acidity and surface area of the carbon cryogel. Furthermore, the effects of these parameters were studied on the ethyl levulinate yield through esterification reaction of levulinic acid in ethanol. The esterification reaction was conducted at reflux temperature, 10 h of reaction time, 19 molar ratio of ethanol to levulinic acid, and 15.0 wt.% carbon cryogel loading. Based on the carbonization temperature and time studies, the carbon cryogel carbonized at 500 °C and 4 h exhibited good performance as solid acid catalyst. Large total surface area and acidity significantly influenced the catalytic activity of carbon cryogel with 80.0 wt.% yield of ethyl levulinate. Thus, carbon cryogel is highly potential as acid catalyst for the esterification of levulinic acid with ethanol.

1. Zainol, M.M., Asmadi, M., Amin, N.A.S., Ahmad, K. (2016). Carbon cryogel microsphere for ethyl levulinate production: Effect of carbonization temperature and time. Journal of Engineering Science and Technology, 11(Special Issue on SOMCHE 2015), 108-12.
This entry was posted in 2016. Bookmark the permalink.