Journal Papers

ISI JOURNAL:

 

  1. N. Othman, and M. Kanazaki, “Development of Multiobjective Trajectory-Optimization Method and Its Application to Improve Aircraft Landing”, Aerospace Science and Technology, Vol. 58, 2016, pp. 166–177.
  2. Zaki, FA. Mazaha, AA. Latif, S. Mansor, MNM. Nasir, MDN. Dahalan, N. Othman, M. Ab Wahid, “Effect of skin and spar laminate orientations on flutter of composite UAV wing”, Journal of Aeronautics, Astronautics and Aviation, Vol. 51, Issue 2, 2019, pp. 201-211.

SCOPUS-INDEXED JOURNAL:

 

  1. MS. A Malik, NNFA. Nik Aziz, MNM. Jaafar, N. Othman, MK. Ariffin, MF. Hasan, M. Said, ”Combustion Study of Waste Cooking Oil Biodiesel in An Oil Burner”, Jurnal Teknologi- Sciences & Engineering, Vol. 882, Issue 4, 2020, pp. 93-98.
  2. IS. Ishak, T. Mat Lazim, NAR. Nik Mohd, N. Othman, MMT. Elsherbeiny, “Computational Investigation of A Wind Turbine Shrouded with A Circular Ring”, CFD Letters, Vol. 12, Issue 10, 2020, pp. 40-51.
  3. MN. Dahalan, A. Abdul Latif, S. Mat, N. Othman, et. Al, “Feasibility Study of Plasma Actuator for Flow Separation Control”, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, Vol. 65, Issue 2, 2020, pp. 201-212.
  4. N. Othman, MR. Rahim, MNM. Jaafar, AAM. Azli, WZW. Omar, M. Said, “Combustion and Emission Characteristics of Palm-Oil-Based Biodiesel in A Liquid Fuel Burner”, IOP Conference Series: Materials Science and Engineering, Vol. 884, Issue 1, 2020, pp. 1-11.
  5. N. Othman, MR. Rahim, MNM. Jaafar, AAM. Azli, MS. Malik, WZW. Omar, M. Said, “Performance and Emission Characteristics of Rice Bran Oil in An Oil Burner ”, IOP Conference Series: Materials Science and Engineering, Vol. 884, Issue 1, 2020, pp. 1-9.
  6. 6. Othman, MZ. Zain, M. AB Wahid, AN. Asmi, “A Study on Human Foot Pressure Behaviour and Balancing Characteristics”, IOP Conference Series: Materials Science and Engineering, Vol. 884, Issue 1, 2020, pp. 1-9.
  7. M. AB Wahid, N. Othman, MZ. Zain, AN. Asmi, MI. Ardani, S. Mansor, “The Effect of Different Motor Constants to an Commercial Propeller”, IOP Conference Series: Materials Science and Engineering, Vol. 884, Issue 1, 2020, pp. 1-9.
  8. N. Othman, MD. MZ. Zain, AR. Abu Bakar, M. AB Wahid, M. Mohamad, IS. Ishak, “A colour recognition device for the visually disabled people”, Indonesian Journal of Electrical Engineering and Computer Science, Institute of Advanced Engineering and Science, Issue 3, 2020, pp. 1322-1329.
  9. N. Othman, MR. Rahim, MNM. Jaafar, AAM. Azli, MS. A Malik, M. Said, MH. Othman@ Leman, “Study of combustion performance of syngas from biomass waste (wood waste) in a gas burner”, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, Akademia Baru, Vol. 60, Issue 2, 2019, pp. 247-257.
  10. MR. Rahim, A. Yusoff, N. Othman , MNM. Jaafar, MSM. Ismail, MK. Arifin, MF. Hasan, “Combustion performance of syngas from palm kernel shell in a gas burner”, Jurnal Teknologi, Universiti Teknologi Malaysia, Vol. 81, Issue 6, 2019, pp. 187-193.
  11. SM. Mohammad, N. Othman, MD. MZ. Zain and AR. Abu Bakar, “Dynamics Behaviour and Characteristics of Rubber Blade Car Performance,” International Journal of Automotive and Mechanical Engineering, Volume 16, Issue 1, 2019, pp. 6437-6452.
  12. M. S. A. Hakim, M. A. Wahid, N. Othman, S. B. Mat, S. Mansor, M. D. Dahalan, W. K. W. Ali, “The Effects of Reynolds Number on Flow Separation of NACA Aerofoil”, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, Vol. 47, Issue 1, 2018, pp. 56-68.
  13. N. Othman, S. Mat, M. Ab Wahid, S. Mansor and Md. Nizam Dahalan, “Experimental Study of UTM New Sport Complex”, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, Vol. 40, 2017, pp. 70-78.
  14. N. Othman, and M. Kanazaki, “Development of Digital Flight Motion Methodology based on Aerodynamic Derivatives Approximation”, Journal of Robotics and Mechatronic, Vol. 20, No.2, 2016, pp. 34–44.
  15. 15. Othman, and M. Kanazaki, “Prediction of Aircraft’s Longitudinal Motion Based Aerodynamic Coefficients and Derivatives by Surrogate Model Approach”, Journal of Mechanics Engineering and Automation (JMEA), Vol. 4, No.7, 2014, pp. 584–594.

 

 

NON-INDEXED JOURNAL:

 

  1. Mat, N. Othman, et. al, “The Influence of Blower Technique on Delta-Winged UAV Vortex Properties”, Journal of Fluid and Structural Mechanics, Vol.1, Issue 1, 2020, pp. 1-8.
  2. Othman, M. Ab Wahid, MNM. Jaafar, NN. Mohd Huridin, “Properties Evaluation and Computational Analysis of Gasifier Chamber Unit Using Agricultural Waste”, Jurnal Mekanikal, Vol. 43, Issue 12, 2020, pp. 1-10.
  3. Aris, A. Ali, IS. Ishak, N. Othman, “Pressure distribution on helicopter fuselage”, Journal of Transport System Engineering, Vol. 6, Issue 1,2019, pp. 10-16.
  4. Othman, M. Kanazaki, M. AB. Wahid, MN. Mohd Jaafar, WZ. Wan Omar, S. Mansor, M. Dahalan, MN. Mohd Nasir, A. Abdul Latiff, WK. Wan Ali, “Aircraft Trajectory Optimization during Descent Using A Kriging-Model-Based Genetic Algorithm,” Jurnal Mekanikal, No. 41, 2018, pp. 59-73.
  5. Mohammad, N. Othman, MD. MZ. Zain and AR. Abu Bakar, “Behaviour and Characteristics of Rubber Blade Car Performance,” Jurnal Mekanikal, Special Issue, No. 41, 2018, pp. 30-41.
  6. Othman, “Prediction of Aerodynamic Derivatives Using Computational Fluid Dynamics (CFD) at Transonic Speed”, Journal of Transport System Engineering, Vol. 6, Issue 2, 2017, pp. 11-18.
  7. Othman, and W. A. W. Khairuddin, “Design and Testing of a 50N Hydrogen Peroxide Monopropellant Thruster,” Jurnal Mekanikal, No. 33, 2011, pp. 70-81.