{"id":280,"date":"2012-10-10T08:58:12","date_gmt":"2012-10-10T00:58:12","guid":{"rendered":"http:\/\/comp.utm.my\/azman2\/?page_id=280"},"modified":"2017-12-28T03:50:23","modified_gmt":"2017-12-28T03:50:23","slug":"isi-journals","status":"publish","type":"page","link":"https:\/\/people.utm.my\/rafiqkadir\/isi-journals\/","title":{"rendered":"ISI Journals"},"content":{"rendered":"<p><a href=\"https:\/\/people.utm.my\/rafiqkadir\/wp-content\/uploads\/sites\/1018\/2012\/10\/Al-Alaq-4.png\" rel=\"attachment wp-att-750\"><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-750\" src=\"https:\/\/people.utm.my\/rafiqkadir\/wp-content\/uploads\/sites\/1018\/2012\/10\/Al-Alaq-4.png\" alt=\"Al-Alaq 4\" width=\"139\" height=\"55\" \/><\/a><\/p>\n<ul>\n<li>Total Q1 Journals: <b>45<\/b><\/li>\n<li>Total Q2 Journals:<b>\u00a042<\/b><\/li>\n<li>Total Q3 Journals: <b>20<\/b><\/li>\n<li>Total Q4 Journals: <strong>13<\/strong><\/li>\n<li>Total Impact Factor: <strong>240.798<\/strong><\/li>\n<\/ul>\n<ol>\n<li>Shahrouz Zamani Khalajabadi, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Izman Sudin &amp; Mohsen Marvibaigi, <em>&#8220;The effect of MgO on the biodegradation properties and biocompatibility of a Mg\/HA\/MgO nanocomposite manufactured by powder metallurgy method&#8221;<\/em> Journal of Alloys and Compounds (ISI, Q1, Impact Factor: 3.014), Vol. 655, pg. 266-280, 2016.\u00a0<a href=\"https:\/\/people.utm.my\/rafiqkadir\/2016-q1-paper-2-jalcom\/\"><img loading=\"lazy\" decoding=\"async\" class=\"alignnone wp-image-1143 size-full\" src=\"https:\/\/people.utm.my\/rafiqkadir\/wp-content\/uploads\/sites\/1018\/2012\/10\/PDF-icon-e1514334302893.png\" alt=\"\" width=\"64\" height=\"64\" \/><\/a><\/li>\n<li>Fatihhi Szali Januddi, Rabiatul Adibah Abdul Rahim, Muhammad Noor Harun, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Tunku Kamarul &amp; Ardiyansyah Syahrom, <em>&#8220;Effect of Torsional Loading on Compressive Fatigue Behaviour of Trabecular Bone&#8221;<\/em> Journal of the Mechanical Behavior of Biomedical Materials (ISI, Q1, Impact Factor: 2.876), Vol. 54, pg. 21-32, 2016.<\/li>\n<li>Zahra Rezai, Ali Selamat, Mohd Shafry Mohd Rahim &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong>, <em>&#8220;<\/em><em>Automatic Plaque Segmentation based on hybrid Fuzzy Clustering and k Nearest Neighborhood using Virtual Histology Intravascular Ultrasound Image<\/em><em>s&#8221;<\/em> Applied Soft Computing (ISI, Q1, Impact Factor: 2.857), accepted, in-press, 2016.<\/li>\n<li>Nida Iqbal, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Saman Iqbal, Saiful Izwan Abdul Razak, M Shahid Rafique, Hamidreza Bakhsheshi-Rad, Hanumantharao Balaji Raghavendran &amp; Azlina Amir Abbas, <em>&#8220;<\/em><em>Nano-hydroxyapatite reinforced zeolite ZSM composites: A comprehensive study on the structural and in vitro biological propertie<\/em><em>s&#8221;<\/em> Ceramics International (ISI, Q1, Impact Factor: 2.758), accepted, in-press, 2016.<\/li>\n<li>Norjihada Izzah, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Nasrul Humaimi Mahmood, Om Prakash Singh, Nida Iqbal &amp; Razauden Mohd Zulkifli, <em>&#8220;<\/em><em>Apini and Meliponini foraging activities influence the phenolic content of different types of Malaysian honey<\/em><em>&#8220;<\/em> Journal of Apicultural Research (ISI, Q1, Impact Factor: 2.084), accepted, in-press, 2016.<\/li>\n<li>Saiful Izwan Abdul Razak, Izzati Fatimah Wahab, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Ahmad Zahran Mohd Khudzari, Abdul Halim Mohd Yusof, Farah Nurujannah Dahli, Nadirul Hasraf Mat Nayan &amp; T. Joseph Sahaya Anand, <em>&#8220;Biomimetic Growth of Hydroxyapatite on Kenaf Fibers&#8221;<\/em> Bioresources (ISI, Q1, Impact Factor: 1.334), Vol. 11(1), 1971-1981, 2016.<\/li>\n<li>Hamidreza Bakhsheshi-Rad, Esah Hamzah, M. Kasiri-Asgarani, S. Jabbarzare, Nida Iqbal &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong>,<em>&#8220;<\/em><em>Deposition of nanostructured fluorine-doped hydroxyapatite\u2013polycaprolactone duplex coating to enhance the mechanical properties and corrosion resistance of Mg alloy for Biomedical Applications<\/em><em>&#8220;<\/em> Materials Science and Engineering C (ISI, Q2, Impact Factor: 3.420), Vol. 60, 526-537, 2016.<\/li>\n<li>Sornambikai Sundaram, Kasi Marimuthu, Lim Qing Hin &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong>, <em>&#8220;<\/em><em>Fish embryo toxicity assessment of o-dianisidine in Clarias gariepinus and its electrochemical treatment in aquatic samples using super conductive carbon black<\/em><em>&#8220;<\/em> RSC Advances (ISI, Q2, Impact Factor: 3.289), accepted, in-press, 2016.<\/li>\n<li>Tham Weng Hong, Mat Uzir Wahit, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Wong Tuck Whye &amp; Onn Hassan,<em>&#8220;<\/em><em>Polyol-based biodegradable polyesters: a short review<\/em><em>&#8220;<\/em> Reviews in Chemical Engineering (ISI, Q2, Impact Factor: 2.163), Vol. 32, 201-221, 2016.<\/li>\n<li>Abdul Hadi Abdul Wahab, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Tunku Kamarul &amp; Ardiyansyah Syahrom,<em>&#8220;<\/em><em>Number of Pegs Influence Focal Stress Distributions and Micromotion in Glenoid Implant: A Finite Element Study<\/em><em>&#8220;<\/em> Medical &amp; Biological Engineering &amp; Computing (ISI, Q2, Impact Factor: 1.797), accepted, in-press, 2016.<\/li>\n<li>Saiful Izwan Abdul Razak, Hassan Adeli, Farah Dahli, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Abdul Halim Mohd Yusof, <em>&#8220;<\/em><em>Conductive Polylactic Acid\/Polyaniline Porous Scaffold via Freeze Extraction for Potential Biomedical Applications<\/em><em>&#8220;<\/em> Soft Materials (ISI, Q3, Impact Factor: 1.333), accepted, in-press, 2016.<\/li>\n<li>Muhammad Ikman Ishak, Aishah Shafi, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Eshamsul Sulaiman, <em>&#8220;<\/em><em>Effect of Ferrule Height and Post Length on Mechanical Stress and Displacement of Endodontically Treated Maxillary Central Incisor &#8211; A Finite Element Analysis<\/em><em>&#8220;<\/em> Journal of Medical and Biological Engineering (ISI, Q3, Impact Factor: 1.018), accepted, in-press, 2016.<\/li>\n<li>Noor Jasmawati, Fatihhi Szali Januddi, Amir Putra Md Saad, Ardiyansyah Syahrom, Muhammad Noor Harun, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Andreas Oschner, <em>&#8220;Mg-based Porous Metals as Cancellous Bone Analogous Material: A Review&#8221;<\/em> Journal of Materials: Design and Applications (ISI, Q4, Impact Factor: 0.793), accepted, in-press, 2016.<\/li>\n<li>Abdul Hakim Md Yusop, Nurizzati Mohd Daud, Hadi Nur, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Hendra Hermawan, <em>&#8220;Controlling the degradation kinetics of porous iron by poly(lactic-co-glycolic acid) infiltration for use as temporary medical implants&#8221;<\/em> Nature Scientific Report (ISI, Q1, Impact Factor: 5.228), accepted, in-press, 2015.<\/li>\n<li>Mohammad Mahdi Taheri, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Tolou Shokuhfar, Azhang Hamlekhan, Mostafa Rezazadeh Shirdar &amp; Farnaz Naghizadeh, <em>&#8220;Fluoridated hydroxyapatite nanorods as novel fillers for improving mechanical properties of dental composite: Synthesis and application&#8221;<\/em> Materials &amp; Design (ISI, Q1, Impact Factor: 3.997), Vol. 82, pg. 119-125, 2015.<\/li>\n<li>Shahrouz Zamani Khalajabadi, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Izman Sudin &amp; Reza Ebrahimi-Kahrizsangi, <em>&#8220;Fabrication, bio-corrosion behavior and mechanical properties of a Mg\/HA\/MgO nanocomposite for biomedical applications&#8221;<\/em> Materials &amp; Design (ISI, Q1, Impact Factor: 3.997), Vol. 88, pg. 1223-1233, 2015.<\/li>\n<li>Muhammad Ruslan Abdullah, Amirhossein Goharian, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Mat Uzir Wahit, <em>&#8220;<\/em><em>Biomechanical and bioactivity concepts of polyetheretherketone composites for use in orthopaedic implants &#8211; a review<\/em><em>&#8220;<\/em> Journal of Biomedical Materials Research Part A (ISI, Q1, Impact Factor: 3.263), accepted, in-press, 2015.<\/li>\n<li>Norhidayu Mohd Zain, Rafaqat Hussain &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong>, <em>&#8220;<\/em><em>Quinone-Rich Polydopamine Functionalization of Yttria Stabilized Zirconia for Apatite Biomineralization: The Effects of Coating Temperature<\/em><em>&#8220;<\/em> Applied Surface Science (ISI, Q1, Impact Factor: 3.150, Vol. 346, pg. 317-328, 2015.<\/li>\n<li>Shahrouz Zamani Khalajabadi, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Izman Sudin &amp; Mohd Zamri Mohd Yusop, <em>&#8220;<\/em><em>Facile fabrication of hydrophobic surfaces on mechanically alloyed-Mg\/HA\/TiO2\/MgO bionanocomposites<\/em><em>&#8220;<\/em> Applied Surface Science (ISI, Q1, Impact Factor: 3.150), Vol. 324, pg. 380-392, 2015.<\/li>\n<li>Hamidreza Bakhsheshi-Rad, Esah Hamzah, Ahmad Fauzi Ismail, Z Sharer, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; M. Daroonparvar, <em>&#8220;Synthesis and corrosion behavior of a hybrid bioceramic-biopolymer coating on biodegradable Mg alloy for orthopaedic implants&#8221;<\/em> Journal of Alloys and Compounds (ISI, Q1, Impact Factor: 3.014), Vol. 648, pg. 1067-1071, 2015.<\/li>\n<li>Ammar Z Alshemary, Muhammad Akram, Goh Yi Fan, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Ahmad Abdollahi &amp; Rafaqat Hussain, <em>&#8220;Structural characterization, optical properties and in vitro bioactivity of mesoporous erbium-doped hydroxyapatite&#8221;<\/em> Journal of Alloys and Compounds (ISI, Q1, Impact Factor: 3.014), Vol. 645, pg. 478-486, 2015.<\/li>\n<li>Fatihhi SJ, Muhammad Noor Harun, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Jaafar Abdullah, Tunku Kamarul, Andreas Oschner &amp; Ardiyansyah Syahrom, <em>&#8220;<\/em><em>Uniaxial and Multiaxial Fatigue Life Prediction of the Trabecular Bone Based on Physiological Loading: A Comparative Study<\/em><em>&#8220;<\/em> Annals of Biomedical Engineering (ISI, Q1, Impact Factor: 2.887), Vol. 43, pg. 2487-2502, 2015.<\/li>\n<li>Nida Iqbal Khan, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Nasrul Humaimi Mahmood, Saman Iqbal, Hanumantha Rao Balaji &amp; Tunku Kamarul, <em>&#8220;<\/em><em>Characterization and Biological Evaluation of Silver Containing Fluoroapatite Nanoparticles Prepared through Microwave Synthesis<\/em><em>&#8220;<\/em> Ceramics International (ISI, Q1, Impact Factor: 2.758), Vol. 41, pg. 6470-6477, 2015.<\/li>\n<li>Mohammad Mahdi Taheri, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Tolou Shokuhfar, Mahtab Assadian, Mostafa Rezazadeh Shirdar &amp; Abolfazl Mirjalili, <em>&#8220;Surfactant-Assisted Hydrothermal Synthesis of Fluoridated Hydroxyapatite Nanorods&#8221;<\/em> Ceramics International (ISI, Q1, Impact Factor: 2.758), Vol. 41, pg. 9867-9872, 2015.<\/li>\n<li>Shahrouz Zamani Khalajabadi, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Izman Sudin, Alireza Samavati &amp; Zulkafli Othaman, <em>&#8220;Synthesis, microstructure and biodegradation behavior of nano-Si and nano-ZnO\/Si coatings on a Mg\/HA\/TiO2\/MgO nanocomposite&#8221;<\/em> Ceramics International (ISI, Q1, Impact Factor: 2.758), Vol. 41, pg. 11346-11358, 2015.<\/li>\n<li>Shahrouz Zamani Khalajabadi, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Izman Sudin &amp; Masoud Kasiri-Asgarani, <em>&#8220;Microstructural characterization, biocorrosion evaluation and mechanical properties of nanostructured ZnO and Si\/ZnO coated Mg\/HA\/TiO2\/MgO nanocomposites&#8221;<\/em> Surface &amp; Coatings Technology (ISI, Q2, Impact Factor: 2.139), Vol. 277, pg. 30-43, 2015.<\/li>\n<li>Hamidreza Bakhsheshirad, Esah Hamzah, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Mohammad Daroonparvar &amp; Mamoun Medraj, <em>&#8220;Enhancement of corrosion resistance and mechanical properties of Mg-1.2Ca-2Bi via a hybrid silicon-biopolymer coating system&#8221;<\/em> Surface &amp; Coatings Technology (ISI, Q2, Impact Factor: 2.139), accepted, in-press, 2015.<\/li>\n<li>Farnaz Naghizadeh, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Ali Doostmohammadi, Fatemeh Roozbahani, Nida Iqbal, Mohammad Mahdi Taheri, Sangeetha Naveen &amp; Tunku Kamarul, <em>&#8220;Rice Husk Derived Bioactive Glass-Ceramic as a Functional Bioceramic: Synthesis, Characterisation and Biological Testing&#8221;<\/em> Journal of Non-Crystalline Solids (ISI, Q1, Impact Factor: 1.825), Vol. 427, pg. 54-61, 2015.<\/li>\n<li>Nida Iqbal, Kashif Ijaz, Muniza Zahid, Abdul S Khan, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Rafaqat Hussain, Anis-ur-Rehman, Jawwad A Darr, Ihtesham-ur-Rehman &amp; Aqif A Chaudhry, <em>&#8220;Microwave Assisted Synthesis and Characterization of Magnesium Substituted Calcium Phosphate Bioceramics&#8221;<\/em> Materials Science and Engineering C (ISI, Q2, Impact Factor: 3.420), Vol. 56, pg. 286-293, 2015.<\/li>\n<li>Sornambikai Sundaram, Madhanagopal Jagannathan, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Palanivel Sathishkumar, Tony Hadibarata &amp; Abdull Rahim Mohammed Yusoff, <em>&#8220;A new electro-generated o-dianisidine enone derivative stabilized MWCNT modified glassy carbon electrode for electro-analytical application&#8221;<\/em> RSC Advances (ISI, Q2, Impact Factor: 3.289), Vol. 5, pg. 45996-46006, 2015.<\/li>\n<li>Mohd Faaizie Darmawan, Suhaila Mohd Yusof, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Habibollah Haron, <em>&#8220;Comparison on three classification techniques for sex estimation from the bone length of Asian children below 19 years old: an analysis using different group of ages&#8221;<\/em> Forensic Science International (ISI, Q2, Impact Factor: 1.950), Vol. 247, pg. 130 e1-11, 2015.<\/li>\n<li>Nasrul Hadi Johari, Kahar Osman, Nor Harris Nor Helmi &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong>, <em>&#8220;Comparative Analysis of Realistic CT-Scan and Simplified Human Airway Models in Airflow Simulation&#8221;<\/em> Computer Methods in Biomechanics and Biomedical Engineering (ISI, Q2, Impact Factor: 1.850), Vol. 18, pg. 48-56, 2015.<\/li>\n<li>Ammar Z Alshemary, Goh Yi Fan, Muhammad Akram, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Rafaqat Hussain, <em>&#8220;Barium and Fluorine Doped Synthetic Hydroxyapatite: Characterization and In-Vitro Bioactivity Analysis&#8221;<\/em> Science of Advanced Materials (ISI, Q2, Impact Factor: 1.812), Vol. 7, pg. 249-257, 2015.<\/li>\n<li>Mohammad Mahdi Taheri, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Noor Kamila Ahmad Shafiai, Tolou Shokuhfar, Mahtab Assadian &amp; Mostafa Rezazadeh Shirdar, <em>&#8220;Green Synthesis of Silver Nanoneedles using Shallot and ATG&#8221;<\/em> Transactions of Nonferrous Metals Society of China (ISI, Q2, Impact Factor: 1.340), Vol. 25, pg. 3286-3290, 2015.<\/li>\n<li>Ardiyansyah Syahrom, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Muhammad Noor Harun &amp; Andreas Oschner, <em>&#8220;<\/em><em>Permeability Study of Cancellous Bone and its Idealised Structures<\/em><em>&#8220;<\/em> Medical Engineering &amp; Physics (ISI, Q3, Impact Factor: 1.619), Vol. 37, pg. 77-86, 2015.<\/li>\n<li>Mostafa Rezazadeh Shirdar, Izman Sudin, Mohammad Mahdi Taheri, Ali Keyvanfar, Mohd Zamri Mohd Yusop &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong>, <em>&#8220;A Novel Hydroxyapatite Composite Reinforced with Titanium Nanotubes Coated on Co-Cr-based Alloy&#8221;<\/em> Vacuum (ISI, Q3, Impact Factor: 1.558), Vol. 122, pg. 82-89, 2015.<\/li>\n<li>Hamidreza Bakhsheshirad, Esah Hamzah, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Mohammad Daroonparvar &amp; Mamoun Medraj, <em>&#8220;Corrosion and mechanical performance of double-layered nano-Al\/PCL coating on Mg-Ca-Bi alloy&#8221;<\/em> Vacuum (ISI, Q3, Impact Factor: 1.558), Vol. 119, pg. 95-98, 2015.<\/li>\n<li>Mohd Faaizie Darmawan, Suhaila Mohd Yusof, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Habibollah Haron, <em>&#8220;<\/em><em>Age estimation based on bone length using 12 regression models of left hand x-ray images for Asian Children below 19 years old<\/em><em>&#8220;<\/em> Legal Medicine (ISI, Q3, Impact Factor: 1.442), Vol. 17(2), pg. 71-78, 2015.<\/li>\n<li>Mahtab Assadian, Mostafa Rezazadeh Shirdar, Mohd Hasbullah Idris, Izman Sudin, Davood Almasi, Mohammad Mahdi Taheri &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong>, <em>&#8220;Optimisation of electrophoretic deposition parameters in coating of metallic substrate by hydroxyapatite using response surface methodology&#8221;<\/em> Arabian Journal for Science and Engineering (ISI, Q3, Impact Factor: 0.728), Vol. 40, pg. 923-933, 2015.<\/li>\n<li>Mostafa Rezazadeh Shirdar, Izman Sudin &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong>, <em>&#8220;Effect of post-treatment techniques on corrosion and wettability of HA coated Co-Cr-Mo alloy&#8221;<\/em> Arabian Journal for Science and Engineering (ISI, Q3, Impact Factor: 0.728), Vol. 40, pg. 1197-1203, 2015.<\/li>\n<li>Mostafa Rezazadeh Shirdar, Izman Sudin &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong>, <em>&#8220;Effect of electrophoretic deposition parameters on the corrosion behavior of HA coated cobalt chromium using response surface methodology&#8221;<\/em> Arabian Journal for Science and Engineering (ISI, Q3, Impact Factor: 0.728), Vol. 41, pg. 591-598, 2015.<\/li>\n<li>Maya Genisa, Zainul Ahmad Rajion, Dasmawati Mohamad, Abdullah Pohchi, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Solehuddin Shuib, <em>&#8220;<\/em><em>Effect of Different Angle Scanning on Density Estimation Based on Hounsfield Unit on CT and CBCT<\/em><em>&#8220;<\/em> Sains Malaysiana (ISI, Q3, Impact Factor: 0.350), Vol. 44, pg. 1331-1337, 2015.<\/li>\n<li>Hamidreza Bakhsheshi-Rad, Mohd Hasullah Idris, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Ali Ourdjini, M. Medraj &amp; M. Daroonparvar, <em>&#8220;Mechanical and Bio-corrosion Properties of Quarternary Mg-Ca-Mn-Zn Alloys Compared with Binary Mg-Ca Alloys&#8221; <\/em>Materials and Design (ISI, Q1, Impact Factor: 3.501), Vol. 53, pg. 283-292, 2014.<\/li>\n<li>Ali Fallahi Arezoodar, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Mina Alizadeh, Sangeetha Naveen &amp; Tunku Kamarul, <em>&#8220;Geometric variable designs of Cam\/Post Mechanisms influence the kinematics of Knee Implants&#8221;<\/em> Knee Surgery, Sports Traumatology, Arthroscopy (ISI, Q1, Impact Factor: 3.053), Vol. 22, pg. 3019-3027, 2014.<\/li>\n<li>Davood Almasi, Izman Sudin, Mahtab Assadian, Mohammad Ghanbari &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong>, <em>&#8220;<\/em><em>HA Coating on PEEK via Chemical Deposition<\/em><em>&#8220;<\/em> Applied Surface Science (ISI, Q1, Impact Factor: 2.711), Vol. 314, pg. 1034-1040, 2014.<\/li>\n<li>Norhidayu Mohd Zain, Rafaqat Hussain &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong>, <em>&#8220;<\/em><em>Surface Modification of Yttria Stabilized Zirconia via Polydopamine Inspired Coating for Hydroxyapatite Biomineralization<\/em><em>&#8220;<\/em> Applied Surface Science (ISI, Q1, Impact Factor: 2.711), Vol. 322, pg. 169-176, 2014.<\/li>\n<li>Goh Yi Fan, Ammar Z. Alshemary, Muhammad Akram, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Rafaqat Hussain, <em>&#8220;Bioactive Glass: An In-Vitro Comparative Study of Doping with Nanoscale Copper and Silver Particles&#8221; <\/em>International Journal of Applied Glass Science (ISI, Q1, Impact Factor: 2.611), Vol. 5(3), pg. 255-266, 2014.<\/li>\n<li>Goh Yi Fan, Ammar Alshemary, Muhammad Akram, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Rafaqat Hussain, <em>&#8220;In Vitro Characterization of Antibacterial Bioactive Glass Containing Ceria&#8221; <\/em>Ceramics International (ISI, Q1, Impact Factor: 2.605), Vol. 40(1), pg. 729-737, 2014.<\/li>\n<li>Kalitheertha Jamuna-Thevi, Nurizzati M Daud, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Hendra Hermawan, <em>&#8220;The influence of new wet synthesis route on the morphology, crystallinity and thermal stability of multiple ionic doped nanoapatite&#8221; <\/em>Ceramics International (ISI, Q1, Impact Factor: 2.605), Vol. 40(1), pg. 1001-1012, 2014.<\/li>\n<li>Nida Iqbal, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Nasrul Humaimi Mahmood, Norita Salim, Gabriele R A Froemming, H R Balaji &amp; Tunku Kamarul, <em>&#8220;Characterization, antibacterial and in vitro compatibility of zinc- silver doped hydroxyapatite nanoparticles prepared through microwave synthesis&#8221; <\/em>Ceramics International (ISI, Q1, Impact Factor: 2.605), Vol. 40(1), pg. 4507-4513, 2014.<\/li>\n<li>Nida Iqbal, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Nasrul Humaimi Mahmood, Mohd Faiz Mohd Yusoff, Jamal Akhter Siddiqui, Norita Salim, Gabriele R A Froemming, Murni Nazira Sarian, H R Balaji &amp; Tunku Kamarul, <em>&#8220;Microwave\u00a0synthesis, characterization, bioactivity and in vitro biocompatibility of zeolite-hydroxyapatite composites for bone tissue engineering applications&#8221; <\/em>Ceramics International (ISI, Q1, Impact Factor: 2.605), Vol. 40(10), pg. 16091-16097, 2014.<\/li>\n<li>Shahrouz Zamani Khalajabadi, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Izman Sudin, Hamidreza Bakhsheshi-Rad &amp; Saeed Farahany, <em>&#8220;<\/em><em>Effect of mechanical alloying on the phase evolution, microstructure and bio-corrosion properties of Mg\/HA\/TiO2\/MgO nanocomposite<\/em><em>&#8220;<\/em> Ceramics International (ISI, Q1, Impact Factor: 2.605), Vol. 40(10), pg. 16743-16759, 2014.<\/li>\n<li>Wong Tuck Whye, Mat Uzir Wahit, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Mohammad Soheilmoghaddam &amp; Harintharavimal Balakrishnan, <em>&#8220;<\/em><em>A novel poly (xylitol-dodecanedioate)\/hyroxyapatite composite with shape memory behaviour<\/em><em>&#8220;<\/em> Materials Letters (ISI, Q1, Impact Factor: 2.489), Vol. 126, pg. 105-108, 2014.<\/li>\n<li>Mokhamad Fakhrul Ulum, Ahmad Kafrawi Nasution, Abdu Hakim Yusop, Andril Arafat, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Vetnizah Juniantito, Deni Noviana &amp; Hendra Hermawan, <em>&#8220;<\/em><em>Evidences of in vivo bioactivity of Fe-bioceramic composites for temporary bone implants<\/em><em>&#8220;<\/em> Journal of Biomedical Materials Research Part B: Applied Biomaterials (ISI, Q2, Impact Factor: 2.759), accepted, in-press, 2014.<\/li>\n<li>Mohd Faiz Mohd Yusoff, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Nida Iqbal, Mas Ayu Hassan &amp; Rafaqat Hussain, <em>&#8220;<\/em><em>Dipcoating of polycaprolactone\/HA composite coating on Ti6Al4V for enhanced corrosion protection<\/em><em>&#8220;<\/em> Surface and Coatings Technology (ISI, Q2, Impact Factor: 1.998), Vol. 245, pg. 102-107, 2014.<\/li>\n<li>Mohammadreza Daroonparvar, Hamidreza Bakhsheshi-rad, Azizi Mat Yajid, Noordin Mohd Yusof, Esah Hamzah &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong>, <em>&#8220;Corrosion resistance investigation of nanostructured Si and Si\/TiO2 coated Mg alloy in 3.5% NaCl&#8221;<\/em> Vacuum (ISI, Q2, Impact Factor: 1.858), Vol. 108, pg. 61-65, 2014.<\/li>\n<li>Hamidreza Bakhsheshi-rad, Esah Hamzah, Mohammadreza Daroonparvar, Safaa N Saud &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong>, <em>&#8220;Bi-layer nano-TiO2\/FHA composite coatings on Mg-Zn-Ce alloy prepared by combined physical vapour deposition and electrochemical deposition methods&#8221;<\/em> Vacuum (ISI, Q2, Impact Factor: 1.858), Vol. 110, pg. 127-135, 2014.<\/li>\n<li>Ahmed Ali A Madfa, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Jamal Kashani, Syafiqah Saidin, Eshamsul Sulaiman, Jamaludin Marhazlinda, Reza G Rahbari, Basri Johan J Abdullah, Hadijah Abdullah &amp; Noor Hayaty Abu Kassim, <em>&#8220;<\/em><em>Stress distributions in maxillary central incisor restored with various types of post materials and design<\/em><em>&#8220;<\/em> Medical Engineering and Physics (ISI, Q2, Impact Factor: 1.825), Vol. 36(7), pg. 962-967, 2014.<\/li>\n<li>Muhammad Hanif Ramlee, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Malliga Raman Murali &amp; Tunku Kamarul, <em>&#8220;Biomechanical evaluation of two commonly used external fixators in the treatment of open subtalar dislocation &#8211; a finite element analysis&#8221; <\/em>Medical Engineering &amp; Physics (ISI, Q2, Impact Factor: 1.825), Vol. 36(7), pg. 962-967, 2014.<\/li>\n<li>Muhammad Hanif Ramlee, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Malliga Raman Murali &amp; Tunku Kamarul, <em>&#8220;A Biomechanical analysis of three commonly used external fixation devices for treating Type III Pilon fractures using finite element analysis&#8221; <\/em>Medical Engineering &amp; Physics (ISI, Q2, Impact Factor: 1.825), Vol. 36(7), pg. 962-967, 2014.<\/li>\n<li>Sornambikai Sundaram, Annamalai Senthil Kumar, Madhanagopal Jagannathan &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong>, <em>&#8220;<\/em><em>Stabilization of Hydroxylamine via Electrochemical Immobilization of 4-nitrophenol on Carbon Nanotube Modified Electrodes: NADH Electrocatalysis at Zero Potential<\/em><em>&#8220;<\/em> Analytical Methods (ISI, Q2, Impact Factor: 1.821), Vol. 6, pg. 8894-8900, 2014.<\/li>\n<li>Muhammad Ruslan Abdullah, Amirhossein Goharian, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Mat Uzir Wahit, <em>&#8220;<\/em><em>Processing of a multi-layer polyetheretherketone composite for use in acetabular cup prosthesis<\/em><em>&#8220;<\/em> Journal of Applied Polymer Science (ISI, Q2, Impact Factor: 1.768), Vol. 131(20), 40915, 2014.<\/li>\n<li>Jukka Matinlinna, Syafiqah Saidin, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Ammar Mustafa, <em>&#8220;<\/em><em>Influence of experimental silane primers on dentin bonding: shear bond strength, morphology and finite element analysis<\/em><em>&#8220;<\/em> Journal of Prosthetic Dentistry (ISI, Q2, Impact Factor: 1.753), Vol. 112(6), pg. 1498-1506, 2014.<\/li>\n<li>Farnaz Naghizadeh, Naznin Sultana, Tengku Muzaffar Tengku Mohamad Shihabudin, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Rafaqat Hussain and Tunku Kamarul, <em>&#8220;The <\/em><em>Fabrication and Characterization of PCL\/Rice Husk derived Bioactive Glass-Ceramic Composite Scaffolds<\/em><em>&#8220;<\/em> Journal of Nanomaterials (ISI, Q2, Impact Factor: 1.644), online ID 253185, 2014.<\/li>\n<li>Hamidreza Bakhsheshi Rad, Esah Hamzah, Mohammadreza Daroonparvar, Muhammad Azizi Mat Yajid, M. Kasiri Asgarani, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Mamoun Medraj, <em>&#8220;In-vitro degradation behavior of Mg alloy coated by fluorine doped hydroxyapatite and calcium deficient hydroxyapatite&#8221;<\/em> Transactions of Nonferrous Metals Society of China (ISI, Q2, Impact Factor: 1.178), Vol. 24, pg. 2516-2528, 2014.<\/li>\n<li>Syahrullail Samion, Mohd I Izhan &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong>, <em>&#8220;Tribological Investigation of RBD Palm Olein in Different Sliding Speeds using Pin-on-Disk Tribotester&#8221;<\/em> Scientia Iranica (ISI, Q2, Impact Factor: 1.025), Vol. 21, pg. 162-170, 2014.<\/li>\n<li>Mokhamad Fakhrul Ulum, Andril Arafat, Deni Noviana, Abdu Hakim Yusop, Ahmad Kafrawi Nasution, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, &amp; Hendra Hermawan, <em>&#8220;<\/em><em>In vitro and in vivo degradation evaluation of novel iron-bioceramic composites for bone implant applications<\/em><em>&#8220;<\/em> Materials Science and Engineering C (ISI, Q3, Impact Factor: 3.088), Vol. 36, pg. 336-344, 2014.<\/li>\n<li>Jamuna Thevi, Nur Najiha Saarani, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Hendra Hermawan, <em>&#8220;<\/em><em>Triple-layered PLGA\/nanoapatite\/lauric acid graded composite membrane for periodontal guided bone regeneration<\/em><em>&#8220;<\/em> Materials Science &amp; Engineering C (ISI, Q3, Impact Factor: 3.088), Vol. 43, pg. 253-263, 2014.<\/li>\n<li>Ruwaida Rosli, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Tunku Kamarul, <em>&#8220;<\/em><em>Stability of Cervical Spine After One Level Corpectomy using Different Number of Screws and Plate Systems<\/em><em>&#8220;<\/em> Journal of Engineering in Medicine (ISI, Q3, Impact Factor: 1.329), Vol. 228, pg. 342-349, 2014.<\/li>\n<li>Gan Hong Seng, Tan Tian Swee, Wong Ling Xuan, Tham Weng Kit, Khairil Amir Sayuti, Ahmad Helmy Abdul Karim &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong>, <em>&#8220;<\/em><em>Interactive knee cartilage extraction using efficient segmentation software: Data from the osteoarthritis initiative<\/em><em>&#8220;<\/em> Bio-Medical Materials and Engineering (ISI, Q3, Impact Factor: 1.091), Vol. 24, pg. 3145-3157, 2014.<\/li>\n<li>Andril Arafat, Mohd Hasbullah Idris, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Hassan Jafari, <em>&#8220;<\/em><em>Characterisation of Calcium Phosphate Coating on Investment Cast 316L Stainless Steel<\/em><em>&#8220;<\/em> Materials Research Innovation (ISI, Q4, Impact Factor: 0.830), Vol. 18, pg. 886-891, 2014.<\/li>\n<li>Gan Hong Seng, Tan Tian Swee, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Ahmad Helmy Abdul Karim, Khairil Amir Sayuti, Wong Ling Xuan &amp; Tham Weng Kit, <em>&#8220;Medical image contrast enhancement using spline concept: Data from the osteoarthritis Initiative&#8221;<\/em> Journal of Medical Imaging and Health Informatics (ISI, Q4, Impact Factor: 0.503), Vol. 4, pg. 511-520, 2014.<\/li>\n<li>Mina Alizadeh, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Mohd Fadhli Miskon, Ali Fallahi Arezoodar, Baharudin Azmi, Malliga Raman Murali &amp; Tunku Kamarul, <em>&#8220;The Use of X-shape Crosslink in Posterior Spinal Constructs Improves Stability in Thoracolumbar Burst Fracture: A Finite Element Study&#8221;<\/em> Journal of Orthopaedic Research (ISI, Q1, Impact Factor: 2.972), Vol. 31(9), pg. 1447-1454, 2013.<\/li>\n<li>Hamidreza Bakhsheshi Rad, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Mohd Hasbullah Idris, <em>&#8220;Synthesis and in vitro degradation evaluation of the nano-HA\/MgF2 and DCPD\/MgF2 composite coating on biodegradable Mg-Ca-Zn alloy&#8221;<\/em> Surface and Coatings Technology (ISI, Q1, Impact Factor: 2.199), Vol. 222, pg. 79-89, 2013.<\/li>\n<li>Syafiqah Saidin, Pascal Chevallier, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Hendra Hermawan &amp; Diego Mantovani, <em>&#8220;Polydopamine as an intermediate layer for silver and hydroxyapatite immobilisation on metallic biomaterials surface&#8221;<\/em> Materials Science and Engineering C \u2013 Materials for Biological Applications (ISI, Q2, Impact Factor: 2.736), Vol. 33(8), pg. 4715-4724, 2013.<\/li>\n<li>Ehsan Zeimaran, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Hussin Mohd Nor, Tunku Kamarul &amp; Ivan Djordjevic, <em>&#8220;Synthesis and characterization of polyacids from palm acid oil and sunflower oil via addition reaction&#8221;<\/em> Bioorganic and Medicinal Chemistry Letters (ISI, Q2, Impact Factor: 2.331), Vol. 23, pg. 6616-6619, 2013.<\/li>\n<li>Goh Yi Fan, Ammar Z. Alshemary, Muhammad Akram, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Rafaqat Hussain, <em>&#8220;<\/em><em>In Vitro Study of Nano-sized Zinc Doped Bioactive Glass<\/em><em>&#8220;<\/em> Materials Chemistry and Physics (ISI, Q1, Impact Factor: 2.129), Vol. 137(3), pg. 1031-1038, 2013.<\/li>\n<li>Hassan Jafari, Mohd Hasbullah Idris, Ali Ourdjini &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong> <em>&#8220;An investigation on interfacial reaction between in-situ melted AZ91D magnesium alloy and ceramic shell mold during investment casting process&#8221;<\/em> Materials Chemistry and Physics (ISI, Q1, Impact Factor: 2.129), Vol. 138(2-3), pg. 672-681, 2013.<\/li>\n<li>Ammar Z. Alshemary, Goh Yi Fan, Muhammad Akram, Ili Rabihah Razali, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Rafaqat Hussain, <em>&#8220;<\/em><em>Microwave Assisted Synthesis of Nano Sized Sulphate Doped Hydroxyapatite<\/em><em>&#8220;<\/em> Materials Research Bulletin (ISI, Q2, Impact Factor: 1.968), Vol. 48(6), pg. 2106-2110, 2013.<\/li>\n<li>Nida Iqbal, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Nik Ahmad Nizam Nik Malek, Nasrul Humaimi Mahmood, Mohd Faiz Mohd Yusoff, Kiran Kumar V. &amp; Tunku Kamarul, <em>&#8220;Characterization and Antibacterial Properties of Stable Silver Substituted Hydroxyapatite Nanoparticles Synthesized through Surfactant assisted Microwave Process&#8221;<\/em> Materials Research Bulletin (ISI, Q2, Impact Factor: 1.968), Vol. 48(9), pg. 3172-3177, 2013.<\/li>\n<li>Ardiyansyah Syahrom, <strong>Mohammed Rafiq Abdul Kadir,<\/strong> Jaafar Abdullah &amp; Andreas Ochsner <em>&#8220;Permeability Studies of Artificial and Natural Cancellous Bone Structures&#8221;<\/em> Medical Engineering &amp; Physics (ISI, Q2, Impact Factor: 1.839), Vol. 35(6), pg. 792-799, 2013.<\/li>\n<li>Mohd Nazri Bajuri, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Malliga Raman Murali &amp; Tunku Kamarul, <em>&#8220;Biomechanical Analysis of the Wrist Arthroplasty in Rheumatoid Arthritis: A Finite Element Analysis&#8221; <\/em>Medical and Biological Engineering and Computing (ISI, Q2, Impact Factor: 1.500), Vol. 51(1-2), pg. 175-186, 2013.<\/li>\n<li>Muhammad Ikman Ishak, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Eshamsul Sulaiman &amp; Noor Hayaty Abu Kasim, <em>&#8220;Finite Element Analysis of Zygomatic Implants in Intrasinus and Extramaxillary Approaches for Prosthetic Rehabilitation in Severely Atrophic Maxillae&#8221;<\/em> International Journal of Oral and Maxillofacial Implants (ISI, Q2, Impact Factor: 1.491), Vol. 28, pg. 151-160, 2013.<\/li>\n<li>Hassan Jafari, Mohd Hasbullah Idris, Ali Ourdjini &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong>, <em>&#8220;Influence of Flux on Melting Characteristics and Surface Quality of in-situ Melting AZ91D&#8221;<\/em> Materials and Manufacturing Processes (ISI, Q2, Impact Factor: 1.486), Vol. 28, pg. 148-153, 2013.<\/li>\n<li>Hamidreza Bakhsheshi Rad, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Mohd Hasbullah Idris, <em>&#8220;The effect of fluoride treatment on corrosion behavior and in-vitro biocompatibility of Mg-1Ca binary alloy for implant application&#8221;<\/em> Transactions of Nonferrous Metals Society of China (ISI, Q2, Impact Factor: 1.001), Vol. 23, pg. 699-710, 2013.<\/li>\n<li>Rosdi Daud, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Izman Sudin, Amir Putra, Muhammad Hisyam Lee &amp; Aminudin Che Ahmad, <em>&#8220;Three Dimensional <\/em><em>Morphometric Study of the Trapezium Shape of the Trochlea Tali<\/em><em>&#8220;<\/em> Journal of Foot and Ankle Surgery (ISI, Q3, Impact Factor: 0.979), Vol. 52(4), pg. 426-431, 2013.<\/li>\n<li>Amir Fereidouni Lotfabadi, Mohd Hasbullah Idris, Ali Ourdjini, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Saeed Farahany &amp; Hamidreza Bakhsheshi Rad, <em>&#8220;<\/em><em>Thermal characteristics and corrosion behaviour of Mg-xZn alloys for biomedical applications<\/em><em>&#8220;<\/em> Bulletin of Materials Science (ISI, Q3, Impact Factor: 0.870), Vol. 36(6), pg. 1103-1113, 2013.<\/li>\n<li>Hamidreza Bakhsheshi Rad, Behrouz Haerian, Abbas Najafizadeh, Mohd Hasbullah Idris, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Esah Hamzah &amp; M. Daroonparvar, <em>&#8220;Cold deformation and heat treatment influence on the microstructures and corrosion behavior of AISI 304 stainless steel&#8221;<\/em> Canadian Metallurgical Quarterly (ISI, Q3, Impact Factor: 0.495) Vol. 52(4), pg. 449-457, 2013.<\/li>\n<li>Raja Mohd Aizat, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Shaifuzain Ab Rahman, Tengku Muzaffar Tengku Md Shihabudin, Norzurani Robson &amp; Tunku Kamarul, <em>&#8220;Biomechanical Comparative Analyses between the Anterolateral and Medial Distal Tibia Locking Plates in Treating Complex Distal Tibial Fracture: A Finite Element Study&#8221;<\/em> Journal of Medical Imaging and Health Informatics (ISI, Q4, Impact Factor: 0.623), Vol. 3(4), pg. 532-537, 2013.<\/li>\n<li>Ishkrizat Taib, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Mohd Hazmil Syahidy, Ahmad Zahran Md Khuzari &amp; Kahar Osman, <em>&#8220;Analysis of Hemodynamic Differences for Stenting Patent Ductus Arteriosus&#8221;<\/em> Journal of Medical Imaging and Health Informatics (ISI, Q4, Impact Factor: 0.623), Vol. 3(4), pg. 555-560, 2013.<\/li>\n<li>Aisyah Ahmad Shafi, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Eshamsul Sulaiman, Noor Hayaty Abu Kasim &amp; Noor Lide Abu Kassim, <em>&#8220;The Effect of Dental Implant Materials and Thread Profiles \u2013 A Finite Element and Statistical Study&#8221;<\/em> Journal of Medical Imaging and Health Informatics (ISI, Q4, Impact Factor: 0.623), Vol. 3(4), pg. 509-513, 2013.<\/li>\n<li>Badreddin Giuma S.K., Kahar Osman &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong>, <em>&#8220;Fluid Structure Interaction Analysis in Abdominal Aortic Aneurysms: Influencce of Diameter, Length and Distal Neck&#8221;<\/em> Journal of Medical Imaging and Health Informatics (ISI, Q4, Impact Factor: 0.623), Vol. 3(4), pg. 514-522, 2013.<\/li>\n<li>Mazatusziha Ahmad, Mat Uzir Wahit, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Khairul Zaman Mohd Dahlan, <em>&#8220;Thermal and Mechanical Properties of Ultra High Molecular Weight Polyethylene \/ High Density Polyethylene\/Polyethylene Glycol Blends&#8221;<\/em> Journal of Polymer Engineering (ISI, Q4, Impact Factor: 0.500) Vol. 33(7), pg. 599-614, 2013.<\/li>\n<li>Shervin Eslami Harandi, Mohammad Mirshahi, Shahriai Koleini, Mohd Hasbullah Idris, Hassan Jafari &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong>, <em>&#8220;Effect of calcium content on the microstructure, hardness and in-vitro corrosion behaviour of biodegradable Mg-Ca binary alloy&#8221;<\/em> Materials Research (ISI, Q4, Impact Factor: 0.483), Vol. 16(1), pg. 11-18, 2013.<\/li>\n<li>Azadeh Nilghaz, Dedy H.B. Wicaksono, Dwi Gustiono, Fadzilah Adibah Abdul Majid, Eko Supriyanto and <strong>Mohammed Rafiq Abdul Kadir<\/strong> <em>&#8220;Flexible Microfluidic Cloth-based Analytical Devices Using a Low-Cost Wax Patterning Technique&#8221;<\/em> Lab on a Chip (ISI, Q1, Impact Factor: 5.697), Vol. 12, pg. 209-218, 2012.<\/li>\n<li>Hamidreza Bakhsheshi Rad, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Mohd Hasbullah Idris &amp; Saed Farahany, <em>&#8220;Relationship between the corrosion behaviour and the thermal characteristics and microstructure of Mg-0.5Ca-xZn alloys&#8221;<\/em> Corrosion Science (ISI, Q1, Impact Factor: 3.615), Vol. 64, pg. 184-197, 2012.<\/li>\n<li>Syafiqah Saidin, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Eshamsul Sulaiman &amp; Noor Hayaty Abu Kassim, <em>&#8220;Effects of different implant-abutment connections on micromotion and stress distribution: Prediction of microgap formation&#8221;<\/em> Journal of Dentistry (ISI, Q1, Impact Factor: 3.200), Vol. 40, pg. 467-474, 2012.<\/li>\n<li>Hamidreza Bakhsheshi Rad, Mohd Hasbullah Idris, <strong>Mohammed Rafiq Abdul Kadir &amp; <\/strong>Saeed Farahany, <em>&#8220;Microstructure Analysis and Corrosion Behavior of Biodegradable Mg-Ca Implant Alloys&#8221;<\/em> Materials &amp; Design (ISI, Q1, Impact Factor: 2.913) Vol. 33, pg. 88-97, 2012.<\/li>\n<li>Shahrouz Zamani, Hamidreza Bakhsheshi Rad, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; \u00a0 \u00a0 \u00a0 Mohammad Reza Mohammad Shafiee, <em>&#8220;<\/em><em>Synthesis and kinetic study of (Mo,W)Si<sub>2<\/sub><\/em><em>-WSi<sub>2<\/sub> nanocomposite by mechanical alloying<\/em><em>&#8220;<\/em> Journal of Alloys and Compounds (ISI, Q1, Impact Factor: 2.390), Vol. 540, pg. 248-259, 2012.<\/li>\n<li>Nida Iqbal Khan, <strong>Mohammed Rafiq Abdul Kadir,<\/strong> Nik Ahmad Nizam Nik Malek, Malliga Raman Murali &amp; Tunku Kamarul, <em>&#8220;Rapid microwave assisted synthesis and characterization of nanosized silver-doped hydroxyapatite with antibacterial properties&#8221;<\/em> Materials Letters (ISI, Q1, Impact Factor: 2.224), Vol. 89, pg. 118-122, 2012.<\/li>\n<li>Raja Mohd Aizat Raja Izaham, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Abdul Halim Abdul Rashid, Md Golam Hossain &amp; Tunku Kamarul, <em>&#8220;<\/em><em>Finite element analysis of Puddu and Tomofix plate fixation for open wedge high tibial osteotomy<\/em><em>&#8220;<\/em> Injury (ISI, Q1, Impact Factor: 2.174), Vol. 43(6), pg. 898-902, 2012.<\/li>\n<li>Shahrouz Zamani, Hamidreza Bakhsheshi Rad, Ali Shokuhfar, Mohamad Reza Vaezi, <strong>Mohammed Rafiq Abdul Kadir,<\/strong> &amp; Mohammad Reza Mohammad Shafiee <em>&#8220;Synthesis and Characterisation of MoSi<sub>2<\/sub> \u2013 Mo<sub>5<\/sub>Si<sub>3<\/sub> nanocomposite by Mechanical Alloying and Heat Treatment&#8221;<\/em> International Journal of Refractory Metals and Hard Materials (ISI, Q1, Impact Factor: 1.858), Vol. 31, pg. 236-241, 2012.<\/li>\n<li>Mazatusziha Ahmad, Mat Uzir Wahit, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Khairul Zaman Mohd Dahlan, <em>&#8220;Mechanical, Rheological and Bioactivity Properties of Ultra High Molecular Weight Polyethylene Bioactive Composites Containing Polyethylene Glycol and Hydroxyapatite&#8221;<\/em> The Scientific World Journal (ISI, Q1, Impact Factor: 1.730), Article ID 474851, 2012.<\/li>\n<li>Alireza Samavati, Sib Krishna Ghoshal, Zulkafli Othaman, Mohammad Reza Dousti and <strong>Mohammed Rafiq Abdul Kadir<\/strong> <em>&#8220;Substrate Temperature Dependent Surface Morphology and Photoluminescence of Germanium Quantum Dots Grown by Radio Frequency Magnetron Sputtering&#8221;<\/em> International Journal of Molecular Science (ISI, Q2, Impact Factor: 2.464), Vol. 13, pg. 12880-12889, 2012.<\/li>\n<li>Saeed Farahany, Hamidreza Bakhsheshi Rad, Mohd Hasbullah Idris, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Amir Fereidouni Lotfabadi &amp; Ali Ourdjini, <em>&#8220;In-situ thermal analysis and macroscopical characterization of Mg-xCa and Mg-0.5Ca-xZn alloy systems&#8221;<\/em> Thermochimica Acta (ISI, Q2, Impact Factor: 1.989), Vol. 527, pg. 180-189, 2012.<\/li>\n<li>Mohd Nazri Bajuri, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Murali Malliga Raman &amp; Tunku Kamarul, <em>&#8220;Mechanical and functional assessment of the wrist affected by rheumatoid arthritis: A finite element analysis&#8221;<\/em> Medical Engineering &amp; Physics (ISI, Q2, Impact Factor: 1.779), Vol. 34(9), pg. 1294-1302, 2012.<\/li>\n<li>Muhammad Ikman Ishak, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Eshamsul Sulaiman &amp; Noor Hayaty Abu Kasim, <em>&#8220;Finite Element Analysis of Different Surgical Approaches in Various Occlusal Loading Locations for Zygomatic Implant Placement for the Treatment of Atrophic Maxillae&#8221;<\/em> International Journal of Oral and Maxillofacial Surgery (ISI, Q2, Impact Factor: 1.521), Vol. 41, pg. 1077-1089, 2012.<\/li>\n<li>Tiong Chiong Ing, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Azli Yahya &amp; Syahrullail Samion, <em>&#8220;The Effect of Temperature on the Tribological Behaviour of RBD Palm Stearin\u201d<\/em> Tribology Transactions (ISI, Q2, Impact Factor: 0.914), Vol. 55, pg. 539-548, 2012.<\/li>\n<li>Hassan Jafari, Mohd Hasbullah Idris, Ali Ourdjini, Saeed Farahany &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong>, <em>&#8220;Characterization of AZ91D Granules Covered with a Flux during In-situ Melting&#8221;<\/em> Particle &amp; Particle Systems Characterization (ISI, Q2, Impact Factor: 0.857), Vol. 29, pg. 1-10, 2012.<\/li>\n<li>Mohd Nazri Bajuri, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Iskandar Mohd Amin &amp; Andreas \u00d6chsner, <em>&#8220;<\/em><em>Biomechanical Analysis <\/em><em>of Rheumatoid Arthritis of the Wrist Joint&#8221;<\/em> Journal of Engineering in Medicine (ISI, Q3, Impact Factor: 1.419), Vol. 226 (7), pg. 510-520, 2012.<\/li>\n<li>Tiong Chiong Ing, <strong>Mohammed Rafiq Abdul Kadir,<\/strong> Azli Yahya &amp; Syahrullail Samion, <em>&#8220;Tribological Behaviour of Refined Bleached and Deodorized Palm Olein in Different Loads using a Four-ball Tribotester&#8221;<\/em> Scientia Iranica B (ISI, Q3, Impact Factor: 0.537), Vol. 19(6), pg. 1487-1492, 2012.<\/li>\n<li>Tiong Chiong Ing, Azli Yahya, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Syahrullail Samion, <em>&#8220;Tribological Evaluation of Refined, Bleached and Deodorised Palm Stearin using Four-ball Tribotester with Different Normal Load&#8221;<\/em> Journal of Zhejiang University \u2013 Science A (ISI, Q3, Impact Factor: 0.527), Vol. 13(8), pg. 633-640, 2012.<\/li>\n<li>Ali Ata Al-Sarhan, Naznin Sultana, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Talal Aburjai, <em>&#8220;<\/em><em>Ethnopharmacological survey of medicinal plants in Malaysia, the Kangkar Pulai region<\/em><em>&#8220;<\/em> International Journal of Pharmacology (ISI, Q4, Impact Factor: 1.202), Vol. 8(8), pg. 679-686, 2012.<\/li>\n<li>Nasrul Hadi Johari, Kahar Osman, Zuliazura Mohd Salleh, Juhara Haron &amp; <strong>Mohammed Rafiq Abdul Kadir<\/strong>, <em>&#8220;The Effect of Different Locations of Tracheal Stenosis to the Flow Characteristics using Reconstructed CT-Scanned Image&#8221;<\/em> Journal of Mechanics in Medicine and Biology (ISI, Q4, Impact Factor: 0.758), Vol. 12(4), pg. 1250066-1 \u2013 1250066-15, 2012.<\/li>\n<li>Hamidreza Bakhsheshi Rad, Ahmad Monshi, Mohd Hasbullah Idris, <strong>Mohammed Rafiq Abdul Kadir &amp; <\/strong>Hassan Jafari, <em>&#8220;Premature Failure Analysis of Forged Cold Back-up Roll in a Continuous Tandem Mill&#8221;<\/em> Materials &amp; Design (ISI, Q1, Impact Factor: 2.200), Vol. 32(8-9), pg. 4376-4384, 2011.<\/li>\n<li>Ardiyansyah Syahrom, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Jaafar Abdullah &amp; Andreas Ochsner, <em>&#8220;Mechanical and Microarchitectural Analyses of Cancellous Bone Through Experiment and Computer Simulation&#8221;<\/em> Medical &amp; Biological Engineering &amp; Computing (ISI, Q1, Impact Factor: 1.878), Vol. 49(12), pg. 1393-1493, 2011.<\/li>\n<li>Mohd Yusof Baharuddin, <strong>Mohammed Rafiq Abdul Kadir<\/strong>, Ahmad Hafiz Zulkifly, Azlin Sa\u2019at, Azian Abdul Aziz &amp; Muhammad Hisyam Lee, <em>&#8220;Morphology Study of the Proximal Femur in Malay Population&#8221;<\/em> International Journal of Morphology (ISI, Q4, Impact Factor: 0.244), Vol. 29(4), pg. 1321-1325, 2011.<\/li>\n<li>Hamidreza Bakhsheshi Rad, Ahmad Monshi, Hossain Monajatizadeh, Mohd Hasbullah Idris, <strong>Mohammed Rafiq Abdul Kadir<\/strong> &amp; Hassan Jafari, <em>&#8220;Effect of Multi-Step Tempering on Retained Austenite and Mechanical Properties of Low Alloy Steel&#8221;<\/em> International Journal of Iron and Steel Research (ISI, Q4, Impact Factor: 0.213), Vol. 18(12), pg. 49-56, 2011.<\/li>\n<li><strong>Mohammed Rafiq Abdul Kadir<\/strong>, Ardiyansyah Syahrom &amp; Andreas \u00d6chsner, <em>&#8220;Finite Element Analysis of Idealised Unit Cell Cancellous Structure Based on Morphological Indices of Cancellous Bone&#8221;<\/em> Medical &amp; Biological Engineering &amp; Computing (ISI, Q2, Impact Factor: 1.791), Vol. 48(5), pg. 497-505, 2010.<\/li>\n<li><strong>Mohammed Rafiq Abdul Kadir<\/strong>, Ulrich Hansen, Ralf Klabunde, Duncan Lucas &amp; Andrew Amis, <em>&#8220;Finite element modelling of primary hip stem stability: The effect of interference fit&#8221;<\/em> Journal of Biomechanics (ISI, Q2, Impact Factor: 2.784), Vol. 41, pg. 587-594, 2008.<\/li>\n<\/ol>\n","protected":false},"excerpt":{"rendered":"<p>Total Q1 Journals: 45 Total Q2 Journals:\u00a042 Total Q3 Journals: 20 Total Q4 Journals: 13 Total Impact Factor: 240.798 Shahrouz Zamani Khalajabadi, Mohammed Rafiq Abdul Kadir, Izman Sudin &amp; Mohsen Marvibaigi, &#8220;The effect of MgO on the biodegradation properties and biocompatibility of a Mg\/HA\/MgO nanocomposite manufactured by powder metallurgy method&#8221; Journal of Alloys and Compounds [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"open","template":"","meta":{"footnotes":""},"class_list":["post-280","page","type-page","status-publish","hentry","entry"],"_links":{"self":[{"href":"https:\/\/people.utm.my\/rafiqkadir\/wp-json\/wp\/v2\/pages\/280","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/people.utm.my\/rafiqkadir\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/people.utm.my\/rafiqkadir\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/people.utm.my\/rafiqkadir\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/people.utm.my\/rafiqkadir\/wp-json\/wp\/v2\/comments?post=280"}],"version-history":[{"count":0,"href":"https:\/\/people.utm.my\/rafiqkadir\/wp-json\/wp\/v2\/pages\/280\/revisions"}],"wp:attachment":[{"href":"https:\/\/people.utm.my\/rafiqkadir\/wp-json\/wp\/v2\/media?parent=280"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}