Journal Papers

ISI/Web of Science Indexed Publications

  1. Construction and Building Materials (2025) – Hydration and microstructural development of cement pastes incorporating diatomaceous earth, expanded perlite, and shape-stabilized phase change materials (SSPCMs) (Impact Factor: 7.4).

  2. Materials (2022) – Enhanced acoustic properties of a novel prepacked aggregates concrete reinforced with waste polypropylene fibers (Impact Factor: 3.623).

  3. Sustainability (2022) – Durability enhancement of sustainable concrete composites comprising waste metallized film food packaging fibers and palm oil fuel ash (Impact Factor: 3.251).

  4. Construction and Building Materials (2019) – Push-out tests on three innovative shear connectors for composite cold-formed steel-concrete beams (Impact Factor: 4.046).

  5. Smart Structures and Systems (2019) – Effect of wollastonite powder and pozzolan microsilica in recycled aggregate concrete (Impact Factor: 3.622).

  6. Steel and Composite Structures (2019) – Application of ELM and GP to design steel–concrete composite floor systems at elevated temperatures (Impact Factor: 3.899).

  7. Journal of Constructional Steel Research (2018) – I-beam to square hollow column blind bolted moment connection: Experimental and numerical study (Impact Factor: 2.509).

  8. Construction and Building Materials (2017) – Structural performance of reinforced interlocking blocks column (Impact Factor: 2.421).

  9. Structural Engineering & Mechanics (2015) – Standardization of composite connections for trapezoid web profiled steel sections (Impact Factor: 0.927).

  10. International Journal of Steel Structures (2015) – Wind-moment design of semi-rigid un-braced steel frames using cruciform column (CCUB) section (Impact Factor: 0.471).

  11. The Scientific World Journal (2014) – Review on cold-formed steel connections (Impact Factor: 1.74).

  12. Materials Research Innovations (2014) – Uniaxial compressive stability of laminated composite plate with localised interfacial degeneration (Impact Factor: 0.473).

  13. Advances in Structural Engineering (2012) – Experimental evaluation of flush end-plate connection with built-up hybrid beam section (Impact Factor: 0.463).

  14. Structural Engineering & Mechanics (2011) – Limiting sway on multi-storey un-braced steel frames with partial strength connections (Impact Factor: 0.429).

  15. International Journal of Steel Structures (2011) – Finite element analysis of flush end-plate connections connected to column web (Impact Factor: 0.362).

  16. Construction and Building Materials (2009) – Push-off tests on pin-connected shear studs with composite steel–concrete beams (Impact Factor: 0.947).

Scopus Indexed Publications

2025

  1. Abdullah, N., Shek, P.N., et al.
    Challenges in Building Information Modelling (BIM) and Robotics Integration in Malaysia’s Future Construction Industry.
    Journal of Applied Engineering Sciences, Vol. 15(1): 45–53.

  2. Yee, L.L., Shek, P.N., et al.
    BIM Practices in Malaysia’s Built Environment: A Mixed Method Analysis.
    International Journal of Built Environment and Sustainability, Vol. 12(2): 89–102.

2023

  1. Law, M., Shek, P.N., Tahir, M.M.
    Parametric Study on RHS Truss Girder Design to Eurocode 3 with Various Spans and Steel Grades.
    Advances in Civil Engineering Materials, Vol. 12(3): 120–132.

  2. Lai, Y.W., Shek, P.N., Sulaiman, A.
    Circular Tunnel Structural Analysis in Soft Ground.
    ASEAN Engineering Journal, Vol. 13(1): 34–44.

  3. Tan, C.S., Shek, P.N., et al.
    Economical Aspect of Truss Design through Geometry Configuration.
    Journal of Advanced Research in Applied Sciences and Engineering Technology, Vol. 31(3): 1–12.

2019–2022 (IOP Conference Series – Materials Science & Engineering)

  1. Shek, P.N., Lee, Y.H., Tan, C.S., et al.
    Cold-formed Steel-Concrete Composite Beam with Innovative Shear Connectors: Experimental & Numerical Analysis.
    IOP Conf. Ser.: Mater. Sci. Eng., Vol. 1153(1): 012034.

  2. Shek, P.N., Tan, C.S., Sulaiman, A.
    Performance Evaluation of Innovative Gusset Plate Connections for Cold-formed Steel Frames.
    IOP Conf. Ser.: Mater. Sci. Eng., Vol. 1052(1): 012042.

  3. Lee, Y.H., Shek, P.N., et al.
    Interlocking Brick Wall Panel System for Low-cost Modular Housing: Full-scale Testing.
    IOP Conf. Ser.: Mater. Sci. Eng., Vol. 949(1): 012057.

2018

  1. Syamsuri, U., Tahir, M.M., Basyaruddin, B.A., Sulaiman, A., Shek, P.N.
    Conceptual Design Using Industrialized Building System for Affordable Housing Construction in Indonesia.
    Advanced Science Letters, Vol. 24(7): 4322–4325.
    DOI: 10.1166/ASL.2018.11598

  2. Kado, B., Mohammad, S., Lee, Y.H., Shek, P.N., Ab. Kadir, M.A.A., Muftah, F.
    Review on Column Fire Resistance Design for Concrete Filled Steel Tube.
    Jurnal Teknologi, 80(6): 169–179.

  3. Lawan, M., Shek, P.N., Tahir, M.M.
    Comparative Study between Linear-Interpolation and Stress-Block Methods of Composite Design Using Cold-formed Steel Section.
    International Journal of Engineering & Technology, 7(3.9): 38–41.

2015–2016 (Jurnal Teknologi & Related)

  1. Muftah, F., Sani, M.S.H.M., Mohammad, S., Shek, P.N., Tahir, M.M.
    Temperature Rise of Cold-formed Steel Built-up Back-to-back Column under Standard Fire.
    Jurnal Teknologi, 78(5-4).

  2. Haron, Z., Darus, N., Han, L.M., Jahya, Z., Hamid, M.F.A., Yahya, K., Lee, Y.L., Shek, P.N.
    Preliminary Study of Occupational Noise Exposure among Leaf Blower and Grass Cutter Workers in Public University.
    Jurnal Teknologi, 77(16).

  3. Taher, Y., Tahir, M.M., Sulaiman, A., Shek, P.N., Saggaff, A.
    Steel Weight Saving Developed from Semi-Continuous Construction in Multi-storey Braced Steel Frame Based on Eurocode 3.
    Jurnal Teknologi, 77(16).

  4. Lawan, M., Tahir, M.M., Shek, P.N., Sulaiman, A.
    Structural Performance of Cold-formed Steel Section in Composite Structures: A Review.
    Jurnal Teknologi, 74(4-4): 165–175.

  5. Mu, K.S., Shek, P.N., Sulaiman, A., Tan, B.C.
    Parametric Study of Compound Cold-formed Steel Sections as Flexural Members.
    Jurnal Teknologi, 74(4-4): 61–66.

  6. Tan, B.C., Shek, P.N., Tahir, M.M., Mu, K.S.
    Analytical Study of End-plate Connection on Cruciform Column Section.
    Jurnal Teknologi, 74(4).

2012–2013 (Advanced Science Letters & Jurnal Teknologi)

  1. Tan, C.S., Lee, Y.H., Lee, Y.L., Mohammad, S., Sulaiman, A., Tahir, M.M., Shek, P.N.
    Numerical Simulation of Cold-formed Steel Top-seat Flange Cleat Connection.
    Jurnal Teknologi, 61(3): 63–71.

  2. Kam, C.Z., Kueh, A.B.H., Shek, P.N., Tan, C.S., Tahir, M.M.
    Flexural Performance of Laminated Composite Plates with Diagonally Perturbed Localized Delamination.
    Advanced Science Letters, Vol. 14: 455–457.

  3. Shek, P.N., Tahir, M.M., Tan, C.S., Kueh, A.B.H., Mohammad, S.
    Experimental Investigation on Locally Produced Cold-formed Steel Sections for Roof Truss System.
    Advanced Science Letters, Vol. 13: 620–623.

  4. Tan, C.S., Tahir, M.M., Shek, P.N., Mohammad, S., Kueh, A.B.H.
    Structural Behaviour of Combined Flange-cleat and Gusset Plate Connection for Cold-formed Steel Double Channel Sections.
    Advanced Science Letters, Vol. 14: 517–520.

2006–2011

  1. Tahir, M.M., Shek, P.N., Tan, C.S.
    Performance of Cruciform Column Using Universal Beam Sections under Axial Compression Load.
    Jurnal Teknologi, 43(B): 51–66.