Proceedings/Conference

  1. Bishir Kado, Shahrin Mohammad, Yeong Huei Lee, Poi Ngian Shek, Mariyana Aida Ab Kadir (2018) Temperature Analysis of Steel Hollow Column Exposed to Standard Fire. Journal of Structural Technology, Volume 3, Issue 1.
  2. Khadavi; Tahir, MM; Ngian, SP; Sulaiman, A; Bakri, A (2018) Economic Aspects of Cold Formed Steel Section Designed as Composite Beam. Advanced Science Letters, Volume 24, Issue 6, pp 4318-4321. DOI: 10.1166/asl.2018.11597.
  3. B Kado, S Mohammad, Y H Lee, P N Shek, M A A Kadir (2018) Experimental investigation on temperature distribution of foamed concrete filled steel tube column under standard fire. Iop Conference Series : Earth And Environment Science. Volume 140.
  4. Musab N A Salih, Mahmood Md Tahir, S Mohammad, Y Ahmad, A Sulaiman, PN Shek, Achmad Abraham, Muhammad Firdaus, K M Aminuddin and Khadavi (2018) Experimental Study On Flexural Behavior Of Partially Encased Cold-Formed Steel Composite Beams Using Rebar As Shear Connector. 10th Asia Pacific Structural Engineering And Construction Conference (APSEC 2018). 13 – 15 November 2018, Langkawi, Malaysia.
  5. A K Mariyana, M Najmi Mastor, M S Abdul Rahman, Z Nurizaty, P N Shek, and M Z Ramli (2018) Utilization Of Rubberized Concrete Columns To Enhance Damping Ratio Subjected To Seismic Loading. Regional Conference In Civil Engineering (RCCE) 2018. 5 – 6 September 2018, Royal Ambarrukmo Hotel, Yogyakarta, Indonesia.
  6. Nur Adilah Mohd Idrus, Mahmood Md Tahir, Shek Poi Ngian (2017) Structural Behavior Of Prefabricated Pad Footing System Designed Using Cold-Formed Steel Lipped Channel Section. 2nd Proceeding Of Civil Engineering: Volume 1 – Structure And Materials.
  7. Nurizaty Zuhan, Shek Poi Ngian (2017) Section Properties Calculation By Matlab Software Of Lipped C Section. 2nd Proceeding Of Civil Engineering: Volume 1 – Structure And Materials.
  8. Yew Zhi Hao, Mahmood Md. Tahir, Shek Poi Ngian (2017) Experimental Investigation Of Long Interlocking Brick Column Subjected To Eccentric Load. 2nd Proceeding Of Civil Engineering: Volume 1 – Structure And Materials.
  9. Lim Teck Thong, Shek Poi Ngian (2017) Structural Behavior Of Light Weigh Steel Frame Under Combined Gravity And Lateral Loadings. 2nd Proceeding Of Civil Engineering: Volume 1 – Structure And Materials.
  10. Yee Yong Lee, Yeong Huei Lee, Shahrin Mohammad, Poi Ngian Shek, Chau Khun Ma (2017) Thermal Characteristics Of A Residential House In A New Township In Johor Bahru. Iop Conference Series: Materials Science And Engineering. Volume 271, pp 1-7.
  11. Mahmood Md Tahir, Anis Saggaff, Shek Poi Ngian, Arizu Sulaiman (2017) “Economic Aspects Of Interlocking Hollow Brick System Designed For Industrialized Building System” AIP Conference Proceedings, Volume 1903.
  12. Yeong-Huei Lee, Cher-Siang Tan, Mahmood Md Tahir, Shahrin Mohammad, Poi-Ngian Shek, Yee-Ling Lee (2014) “Influence of Angle Thickness towards Stiffness and Strength Prediction for Cold-Formed Steel Top-Seat Flange Cleat Connection” Applied Mechanics and Materials, Volume 479-480, pp 1144-1148.
  13. Anis Saggaff, Mahmood Md Tahir, Poi-Ngian Shek (2013) “Flexural Behavior of Steel Reinforced Brick Beam Utilizing Interlocking Brick System” Advanced Materials Research, Volume 661, 116-119.
  14. Yee Ling Lee, Cher Siang Tan, Yeong Huei Lee, Shahrin Mohammad, Mahmood M. Tahir, Poi Ngian Shek (2013) “Effective Steel Area of Fully Embedded Cold-Formed Steel Frame in Composite Slab System under Pure Bending” Applied Mechanics and Materials, Volume 284 – 287, 1300 -1304
  15. Poi-Ngian Shek, Mahmood Md Tahir, Cher-Siang Tan, Arizu Sulaiman (2013) “Experimental Investigation of Retrofitted Extended End-Plate Connections” Applied Mechanics and Materials, Volume 284 – 287, 1330 – 1333
  16. Yeong Huei Lee, Cher-Siang Tan, Yee Ling Lee, Mahmood M. Tahir, Shahrin Mohammad, Poi Ngian Shek (2013) “Numerical Modelling of Stiffness and Strength Behaviour of Top-seat Flange-cleat Connection for Cold-formed Double Channel Section” Applied Mechanics and Materials, Volume 284 – 287, 1426 – 1430
  17. Shahrin Mohammad, Mahmood Md Tahir, Cher-Siang Tan, Poi-Ngian Shek (2012) “Experimental Investigation on Wide-Span Cold-Formed Steel Roof Truss System” Applied Mechanics and Materials, Volume 166 – 169, 1304 – 1307.
  18. Anis Saggaff, Mahmood Md Tahir, Norwati Bte Jamaluddin, Poi-Ngian Shek, Cher-Siang Tan (2012) “Experimental Test on Composite Beam with Various Slab Systems” Applied Mechanics and Materials, Volume 166 – 169, 33 – 36.
  19. Roya Kohamdel, Behzad Abdi, Poi-Ngian Shek, Mahmood Md Tahir, Ahmad Beng-Hong Kueh (2012) “Optimization of Cold-Formed Channel Sections using Imperialist Competitive Algorithm” Applied Mechanics and Materials, Volume 166 – 169, 493 – 496.
  20. Shek Poi Ngian, Mahmood Md Tahir, Tan Cher Siang, Ahmad Kueh Beng Hong (2011) “Experimental Investigation of End-Plate Connection with Cruciform Column Section” Advanced Materials Research 250-253, pp. 3730-3733.
  21. Mahmood Md Tahir, Anis Saggaff, Arizu Sulaiman, Shek Poi Ngian, Tan Cher Siang, Ahmad Kueh Beng Hong (2011) “Behaviour of Composite Beam with Trapezoid Web Profiled Steel Section in Sub-Assemblage Frame” Advanced Materials Research 250-253, pp. 1271-1274.
  22. Tan Cher Siang, Mahmood Md Tahir, Shek Poi Ngian, Ahmad Kueh Beng Hong (2011) “Experimental Investigation on Slip-in Connection for Cold-formed Steel Double Channel Sections” Advanced Materials Research 250-253, pp. 1038-1041.
  23. B.H. Kueh, W.W. Seh, P.N. Shek, C.S. Tan, M.M. Tahir (2011) “Maximum Local Thermal Effects Carpet Plot for Symmetric Laminated Composite Plates” Advanced Materials Research 250-253, pp. 3748-3751.
  24. Fadhluhartini binti Muftah, Mohd Syahrul Hisyam bin Mohd Sani, Shahrin bin Mohammad, Mahmood Md Tahir, Shek Poi Ngian (2016) “Temperature Development Of Cold Formed Steel Column Channel Section Under Standard Fire” International Conference On Advanced Science, Engineering And Technology (ICASET)
  25. Shek Poi Ngian, Lee Yeong Huei (2015) “Capacity Of Interlocking Stub Column With Cement Mortar Infill Under Axial Compression Load” 9th Asia Pacific Structural Engineering And Construction Conference & 8th Asean Civil Engineering Conference (APSEC-ACEC 2015)
  26. Woon Chin Peow, Shek Poi Ngian, Mahmood Md Tahir, Ahmad Kueh Beng Hong (2015) “Compressive Strength Of Ground Waste Seashells In Cement Mortars For Masonry And Plastering” Applied Mechanics And Materials
  27. Mohd Syahrul Hisyam bin Mohd Sani, Hau Tam Ping, Tan Cher Siang, Lee Yeong Huei, Shek Poi Ngian, Arizu Sulaiman (2015) “Force And Deformation Behaviour Of Roof Truss System With Cold-Formed Steel Channel Section” 9th Asia Pacific Structural Engineering And Construction Conference & 8th Asean Civil Engineering Conference
  28. Tan Boon Kai, Shek Poi Ngian, Tan Cher Siang, Ahmad Kueh Beng Hong (2014) “Monotonic Behaviour Of Beam-To-Column Connections With Double Channel Cold-Formed Steel Sections” National Seminar On Civil Engineering Research SEPKA 2014
  29. Woon Chin Peow, Shek Poi Ngian, Mahmood Md Tahir (2014) “Engineering Properties Of Bio-Inspired Cement Mortar Containing Seashell Powder” National Seminar On Civil Engineering Research SEPKA2014
  30. Seah Ivy, Shek Poi Ngian (2014) “Parametric Study of Blind Bolted End-Plate Connection On Structural Square Hollow Section” 2014 Structural And Civil Engineering Workshop (SCEW 2014)
  31. Tan Boon Kai, Shek Poi Ngian, Tan Cher Siang, Ahmad Kueh Beng Hong (2014) “Finite Element Analysis Of Top-Seat Beam-To-Column Connections With Double Channel Cold-Formed Steel Sections” The 6th International Conference Of Asian Concrete Federation
  32. Boon-Cheik Tan, Poi-Ngian Shek, Mahmood Md Tahir, Ker-Shin Mu (2013) “Analytical Study of End-Plate Connection on Cruciform Column Section” The 9th International Conference On Geotechnical And Transportation Engineering And The 1st International Conference On Construction And Building Engineering, 2013 (GEOCON 2013)
  33. Ker-Shin Mu, Poi-Ngian Shek, Arizu Sulaiman, Boon-Cheik Tan (2013) “Parametric Study of Compound Cold-Formed Steel Sections as Flexural Members” The 9th International Conference On Geotechnical And Transportation Engineering And The 1st International Conference On Construction And Building Engineering, 2013 (GEOCON 2013)
  34. Roya Kohandel Gargari, Mahmood Md Tahir, Poi-Ngian Shek (2012) “Finite Element Models for Blind-Bolted End-Plate Connection on Structural Hollow Section” 8th Asia Pacific Structural Engineering and Construction Conference (APSEC 2012)
  35. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang (2012) “Experimental and Theoretical Analysis of Retrofitted Extended End-Plate Connections” 8th Asia Pacific Structural Engineering and Construction Conference (APSEC 2012)
  36. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang (2011) “Experimental Investigation on Sub-Assemblage Frame with Cruciform Column Section.” Full paper accepted for The 6th International Symposium on Steel Structures (ISSS 2011)
  37. Shek Poi Ngian, Mahmood Md Tahir, Tan Cher Siang, Arizu Sulaiman (2011) “Experimental Investigation on Full-Scale Sub-Assemblage Frame” 7th International Conference on Steel and Aluminium Structures 2011 (ICSAS11)
  38. Tan Cher Siang, Mahmood Md Tahir, Shek Poi Ngian (2011) “Experimental Investigation on Bolted Angle Connections for Cold-Formed Steel Sections” 7th International Conference on Steel and Aluminium Structures 2011 (ICSAS11)
  39. Mahmood Md Tahir, Irwan Juki, Tan Cher Siang, Shek Poi Ngian (2011) “Experimental Investigation of Flush End-Plate Connection Connected to Column Web” 7th International Conference on Steel and Aluminium Structures 2011 (ICSAS11)
  40. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang, Wong Kah Leong (2008) “Comparison of Partial Strength Connection between Extended and Flush End-Plate Connections Using Built-Up Beam Sections” International Graduate Conference on Engineering and Science 2008 (IGCES 2008)
  41. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Wong Kah Leong (2008) “Experimental Behaviour of Partial Strength Steel Beam-To-Column Connection Using Built-Up Beam Sections” 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management (EnCon 08)
  42. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang, Wong Kah Leong (2007) “The Economic Comparison Of Multi-Storey Un-braced Steel Frames Design In Semi-Continuous Construction” National Seminar on Civil Engineering Research (SEPKA 2007)
  43. Wong Kah Leong, Airil Yasreen Mohd Yassin, Mahmood Md Tahir, Tan Cher Siang, Shek Poi Ngian (2007) “Application Of Cold-Formed Steel Sections For Permanent Formwork Of Pad Footing Foundation” National Metallurgical Conference 2007
  44. Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang, Wong Kah Leong (2007) “The Use Of Cruciform Column Sections For Multi-Storey Steel Frames” National Metallurgical Conference 2007
  45. Mahmood Md Tahir, Anis Saggaff, Arizu Sulaiman, Shek Poi Ngian (2007) “Standardisation Of Partial Strength Composite Connections Using Pre-Fabricated Steel Sections” EACEF
  46. Anis Saggaff, Shek Poi Ngian, Mahmood Md Tahir, Arizu Sulaiman, Wong Kah Leong. (2007) “Buckling Analysis Of Cruciform Column Using Universal Beam Section” EACEF
  47. Mahmood Md Tahir, Arizu Sulaiman, Tan Cher Siang, Shek Poi Ngian (2007) “Economic Aspects of Partial Strength Connection in the Design of Braced Steel Frame Using Trapezoidal Web Profiled Steel Sections” Persidangan Kebangsaan AWAM 07
  48. Shek Poi Ngian, Mahmood Md Tahir, Tan Cher Siang (2007) “Ultimate Axial Load of Cruciform Column Using Universal Beam Section” Persidangan Kebangsaan AWAM 07
  49. Mahmood Md Tahir, Tan Cher Siang, Shek Poi Ngian (2006) “Typical Experimental Tests on Cold-Formed Steel Structures” 6th Asia Pacific Structural Engineering and Construction Conference 2006
  50. Mahmood Md Tahir, Tan Cher Siang, Shek Poi Ngian, Anis Saggaff (2006) “Economic Aspect of Un-braced Frame Design for Multi Storey Structure Using Cruciform Column” 6th Asia Pacific Structural Engineering and Construction Conference 2006
  51. Mahmood Md Tahir, Tan Cher Siang, Shek Poi Ngian, Sariffudin Saad (2006) “Application of Wind Moment Method on the Design of Multi-storey Un-braced Steel Frames with Partial and Full Strength Connections” 6th Asia Pacific Structural Engineering and Construction Conference 2006
  52. Mahmood Md Tahir, Shek Poi Ngian, Tan Cher Siang, Anis Saggaff (2006) “Development of Sections Properties Tables for Cruciform Column Using Universal Beam Sections” 1st Regional Postgraduate Conference on Engineering and Science 2006
  53. Mahmood Md Tahir, Anis Saggaff, Shek Poi Ngian, Shahrin Mohamed (2006) “Full scale testing on composite connection using Trapezoid Web Profiled steel section” 19th Australasian Conference on the Mechanics of Structures and Materials
  54. Mahmood Md Tahir, Shek Poi Ngian, Tan Cher Siang (2006) “The Economic Aspect Of Multi-Storey Un-braced Steel Frames Design In Continuous Construction Using S275 And S355” International Seminar on Civil and Infrastructure Engineering 2006 (ISCIE ’06)