Conference Proceedings

Updated : 26/04/2020

  1. S. Abu Hassan (1999), “Strain Analysis of a Saddle Mounted GRP Pipe,” World Engineering Congress, Malaysia. Click Here
  2. S. Abu Hassan (2000), “Resistance Predictions of an Underwater Vehicle.” International Conference on Advances in Strategic Technologies, Malaysia.
  3. S. Abu Hassan and S. H. Tapsir (2000), “Carbon Fiber Reinforced Polymer (CFRP) System for External Strengthening of Concrete Bridge Girder.” Fourth Malaysian Road Conference. Click Here
  4. S. H. Tapsir, A. R. Mohd. Sam, J. Mohamad Yatim, S. Abu Hassan and Y. L. Lee (2001), “Flexural Properties of Reinforced Concrete Beams Strengthened with Unidirectional CFRP Laminate System.” National Seminar on Advanced Materials Development in Malaysia, Malaysia, 15th – 16th May 2001.
  5. S. H. Tapsir, A. R. Mohd. Sam, J. Mohamad Yatim, S. Abu Hassan and C. C. Kee (2001), “Shear Properties of Reinforced Concrete Beams Strengthened with Carbon Fibre Reinforced Polymer (CFRP).” National Seminar on Advanced Materials Development in Malaysia, Malaysia, 15th – 16th May 2001.
  6. M. Y. Abdullah, S. Abu Hassan and C. K. Chan (2001), “Experimental Testing Vibration Properties of FRP Composite Plates Validates by Finite Element Analysis.” National Seminar on Advanced Materials Development in Malaysia, Malaysia, 15th – 16th May 2001.
  7. A. R. Mohd. Sam, S. Abu Hassan and Y. Saed Ismail (2002), “Tensile Behaviour of CFRP and GFRP Reinforcements.” Research Seminar on Materials and Construction, October 29th – 30th 2002, UTM, Malaysia.
  8. A. R. Mohd. Sam, S. Abu Hassan and I. Johan Azmi (2002), “Performance of GFRP Plate as Strengthening Material for Reinforcement Concrete Beams.” Research Seminar on Materials and Construction, Oct 29th – 30th 2002, UTM, Malaysia.
  9. A. R. Mohd. Sam, S. Abu Hassan and K. Wee Seng (2002), “Performance of Concrete Column Strengthened with CFRP Sheet.” Research Seminar on Materials and Construction, October 29th – 30th 2002, UTM, Malaysia.
  10. A. R. Mohd. Sam, S. Abu Hassan and C. Hoe Cheong (2002), “The Flexural Behaviour of Reinforced Concrete Beams Strengthened with CFRP Plates.” Research Seminar on Materials and Construction, October 29th – 30th 2002, UTM, Malaysia.
  11. S. Abu Hassan (2003), “Rehabilition of Reinforced Concrete Structures Using FRP Plate-Bonding System.” National Symposium on Science and Technology, July 28th – 30th 2003. Click Here
  12. A. R. Mohd. Sam and S. Abu Hassan (2003), “Behaviour of Reinforced Concrete Beam Strengthened with Fibre Reinforced Polymer Plate.” Asia Pacific Structural Engineering and Construction Conference, August 26th – 27th 2003.
  13. A. R. Mohd. Sam, Y. S. Ismail and S. Abu Hassan (2003), “Bond Behaviour of CRFP Plate Bonded of Concrete.” Malaysia Science and Technology Congress, September 23rd – 25th 2003.
  14. A. R. Mohd. Sam and S. Abu Hassan (2004), “Fully Bonded GFRP Composite Footbridge – UTM Experience.” International Conference on Bridge Engineering and Hydraulic Structures, Universiti Putra Malaysia, Malaysia, 26th – 28th July 2004.
  15. A. R. Mohd. Sam and S. Abu Hassan (2005), “Fibre reinforced polymer composites in construction.” National Civil Engineering Conference (NACEC2005), 19th – 20th December 2005, KUITTHO, Johor.
  16. A. R. Mohd. Sam and S. Abu Hassan (2005), “Flexural behaviour of reinforced concrete beams strengthened with CFRP Plates.” National Civil Engineering Conference (NACEC2005), 19th – 20th December 2005, KUITTHO, Johor.
  17. Y. S. Ismail and S. Abu Hassan (2006), “The effect of buckling towards the strength of FRP Pultruded Column.” National Seminar on Science and its applications in industry, February 14th – 15th 2006, Century Mahkota Hotel, Melaka.
  18. A. R. Mohd. Sam and S. Abu Hassan (2006), “Performance of doubly-reinforced concrete beams strengthened with CFRP plate.” Malaysian Science and Technology Congress, September 2006.
  19. Ainullotfi Abdul-Latif, Mohd Zulmatfi Zainuddin and Shukur Abu Hassan  (2006), “Finite Element Analysis and Experimental Tests on UTM Composite Bridge.” 6th Regional Conference on Computational Mechanics & Numerical Analysis (CMNA 2006), 12th – 13th May 2006, Syiah Kuala University, Banda Aceh, Indonesia.
  20. Mohd Ruzaimi Mat Rejab, Hasnulfikri Mahbot and Shukur Abu Hassan  (2006), “Failure Investigation of GFRP Water Storage Tank: A Case Study at IKBN Jitra, Kedah.” Proceedings of National Seminar on Science, Technology & Social Sciences 2006 (STSS), Kuantan, 30th – 31st May 2006.
  21. Norhan Abd. Rahman, Shukur Abu Hassan , Ngien Su Kong and Siti Rabe’ah (2007), “Rubbish Traps in Open Channel Flow.” National Seminar in Civil Engineering Research, UTM, Johor Bahru, Malaysia, December 2007.
  22. Norhan Abd Rahman and Shukur Abu Hassan  (2007), “Study of effectiveness for rubbish traps in open channel flow.” National Seminar on Civil Engineering Research (SEPKA 2007), Good Hope Hotel, Skudai. Click Here
  23. M. H. Mohd Hashim, A. R. Mohd Sam, M.W. Husin & S. Abu Hassan (2007), “Performance of Externally Bonded Reinforced Concrete Structures using Carbon Fiber Reinforced Polymer in Tropical Climate.” Conference on Sustainable Building South East Asia, 5-7 November 2007, Malaysia. Click Here
  24. Norhan Abd. Rahman, Shukur Abu Hassan , Noraliani Alias, Siti Rabe’ah Othman, Noor Suraya Romali and Muhammad Fuad Shukor (2008), “Application of GFRP Rubbish Trap in Open Channel System.” 6th Seminar on Water Management (JSPS-VCC), July 2008 (Sabah). Click Here
  25. Omar B., Abu Hassan, S. and Ballal T. (2009), “Exploring Context-Awareness in the Construction Logistics Services Delivery.” In: Managing IT in Construction/Managing Construction for Tomorrow, CIB W078, 26th International Conference, Istanbul Technical University, Istanbul, Turkey, October 2009, pp. 439-448. Click Here
  26. S. Abu Hassan, A. R. Mohd. Sam and Y.S. Ismail (2012), “CRFP Plate Properties under Tropical Climate.” JEC Composites Conference, Singapore. Click Here
  27. Abdi, B., Abu Hassan, S., Wahit, M. U. and Umar, A. H. (2014), “Tensile and flexural properties of recycled glass fibre reinforced polyester composite.” 1st International Conference on Science & Engineering of Materials 2014 (ICoSEM2014), November 2013, Kuala Lumpur, Malaysia. Click Here
  28. Abdul Rahman Mohd. Sam, Shukur Abu Hassan , Mohd Hisbany Mohd Hashim, Mohd Yunus Ishak and Jamaludin Mohamad Yatim (2014), “Performance of Carbon Fibre Reinforced Polymer-Concrete Bonding System in Tropical Climate.” In: International Conference of Engineering, Information Technology, and Science (ICEITS2014). 4th – 5th December 2014. IOI Hotel & Golf Resort, Bandar Sunway, Malaysia. Click Here 
  29. Chong Lip Gang, Shukur Abu Hassan  & Mohd Yazid Yahya (2015), “The Potential of Biomimetics Design in the Development of Impact Resistant Material.” In: 1st ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), Kuala Lumpur. Click Here 
  30. Mehran Gholami, Abdul Rahman Mohd Sam, Jamaludin Mohamad Yatim & Shukur Abu Hassan  (2015), “Performance of Carbon Fibre Reinforced Polymer Plate Bonding System under Various Environmental Conditions.” In: 9th Asia Pacific Structural Engineering and Construction Conference and 8th ASEAN Civil Engineering Conference, Kuala Lumpur. Click Here 
  31. Nor Izzah Mokhtar, Yusof Ahmad & Shukur Abu Hassan  (2015), “Shear Strengthening of Solid Timber Beams Using High Strength Fibre Reinforced Epoxy System.” In: 9th Asia Pacific Structural Engineering & Construction Conference (APSEC 2015) and 8th Asean Civil Engineering Conference (ACEC 2015). Kuala Lumpur.
  32. Nor Izzah Mokhtar, Yusof Ahmad & Shukur Abu Hassan  (2015), “Shear Strengthening of Solid Timber Beams using High Strength Fibre Reinforced Epoxy System.” In: Innovative Practices in Higher Education Expo (I-PHEX 2015). 6-8 August 2015. UTM Kuala Lumpur. Click Here 
  33. Umar Abdul Hanan, Shukur Abu Hassan , Mat Uzir Wahit & Siti Khalijah Jamal (2016), “Mechanical Recycling of GFRP Waste as Reinforcement in Unsaturated Polyester Composites.” In: 6th International Graduate Conference on Engineering, Science and Humanities (IGCESH). Johor Bahru. Click Here 
  34. Siti Khalijah Jamal, Shukur Abu Hassan , Wong King Jye, Umar Abdul Hanan & Muhamad Norkhizan Abdullah (2016), “Tensile Behaviour of Unbalanced Woven Kenaf Reinforced Polyester Composites.” In: 6th International Graduate Conference on Engineering, Science and Humanities (IGCESH), Johor Bahru. Click Here 
  35. Hooi Peng Lim, Hairizza Kosnan, Shukur Abu Hassan  (2016), “Reco Block: Significance Of Replacing Rice Husk Ash As Natural Filler In Ecofriendly Retaining Wall Block.” In: 6th International Graduate Conference on Engineering, Science and Humanities (IGCESH), Johor Bahru. Click Here 
  36. Nor Ashiqeen Jamaluddin, Shukur Abu Hassan , Ab Saman Abd Kader, Balqis Omar and Mohamad Azim Mohd Adam (2017), “Compressive behaviour of Filament Wound Steel/Carbon Hybrid Composites Tube.” Mechanical Engineering Research Day (MERD’17), 30th March 2017. UTeM, Melaka. Click Here
  37. Umar Abdul Hanan, Shukur Abu Hassan, Mat Uzir Wahit, Balqis Omar, Rohana Yusof and Siti Khalijah Jamal (2017), “Mechanical properties of recycled glass fibre reinforced nanoclay/unsaturated polyester composites.” International Journal of Advanced and Applied Sciences, 4(3):1-6.
  38. K. Jamal, S. A. Hassan, K. J. Wong and M. Y. Yahya (2017), “Flexural and interlaminar shear study of hybrid woven kenaf/recycled GFRP (rGFRP) composites subjected to bending load.” International Journal of Advanced and Applied Sciences, 4(3):45-50.
  39. Siti Khalijah Jamal, Shukur Abu Hassan, Wong King Jye, Umar Abdul Hanan, Mohd Nazrul Roslan (2017), “The influence of woven density on tensile properties of hybrid kenaf/glass composites.” Journal of Applied Environmental and Biological Sciences,7(7):160-166.
  40. Iqbal Mokhtar, Mohd Yazid Yahya, Shukur Abu Hassan, and Carlo Santulli (2017), “Transverse impact response of filament wound basalt composite tubes.” Composites Part B: Engineering 128 (1). pp. 134-145.(IF=4.727).
  41. S. Rajendran, M. Johar, K.O. Low, S. Abu Hassan & K.J. Wong (2019) Interlaminar fracture toughness of a plain weave flax/epoxy composite, Plastics, Rubber and Composites, 48:2, 74-81. (IF = 0.848).
  42. Abu Hassan, S., Santulli, C., Yahya, M. Y. B., Gang, C. L., & Abu, B. M. N. (2018). The potential of biomimetics design in the development of impact resistant material. FME Transactions, 46(1), 108-116.
  43. Quanjin, M., Rejab, M. R. M., Idris, M. S., Hassan, S. A., & Kumar, N. M. (2019). Effect of winding angle on the quasi-static crushing behaviour of thin-walled carbon fibre-reinforced polymer tubes. Polymers and Polymer Composites, 0967391119887571.
  44. Quanjin, M. A., M Sahat, I., Mat Rejab, M. R., Abu Hassan, S., Zhang, B., & Merzuki, M. N. (2019). The energy-absorbing characteristics of filament wound hybrid carbon fiber-reinforced plastic/polylactic acid tubes with different infill pattern structures. Journal of Reinforced Plastics and Composites, 38(23-24), 1067-1088.
  45. Ashiqeen Jamaluddin, N., Sheikh, S., Abdul Hanan, U., Izzah Mokhtar, N., Abu Hassan, S., Yazid Yahya, M., & Rahman Mohd. Sam, A. (2019, March). Comparison of tensile properties between natural fibres and inorganic fibres for strengthening timber structures. In MATEC Web of Conferences (Vol. 276, p. 01010). EDP Sciences.
  46. Dani, A. A., Jamaluddin, N. A., Hassan, S. A., & Yahya, M. Y. (2019, January). Modulus Effect on Local Load Distribution for FRP/Steel Bonded Joint. In IOP Conference Series: Earth and Environmental Science (Vol. 220, No. 1, p. 012060). IOP Publishing.
  47. Mukhammad, A. F. H., Nurhadiyanto, D., Hassan, S. A., & Riyadi, T. W. B. (2020, January). Preliminary study of fragment simulating projectile on epoxy-ramie composite. In Journal of Physics: Conference Series (Vol. 1446, No. 1, p. 012001). IOP Publishing.
  48. Nor Izzah Mokhtar, Shukur Abu Hassan, Abdul Rahman Mohd. Sam, Yusof Ahmad & Balqis Omar (2017), “Bond performances between CFRP plate and steel plate to concrete prism using structural adhesives.” Malaysian Journal of Civil Engineering 29 Special Issue(1):37-55.