Journal Papers

Updated : 09082017

Journal indexed in Thomson Reuters

  1. Hassan, S. A., Gholami, M., Ismail, Y. S., & Sam, A. R. M. (2015), “Characteristics of concrete/CFRP bonding system under natural tropical climate.” Construction and Building Materials, 77, 297-306. (IF=2.265). Click Here
  2. Ayatollahi, M. R., Yahya, M. Y., Shirazi, H. A., & Hassan, S. A. (2015), “Mechanical and tribological properties of hydroxyapatite nanoparticles extracted from natural bovine bone and the bone cement developed by nano-sized bovine hydroxyapatite filler.” Ceramics International, 41(9), 10818-10827. (IF=2.086). Click Here
  3. Umar Abdul Hanan, Shukur Abu Hassan, Mat Uzir Wahit, Balqis Omar, Rohana Yusof and Siti Khalijah Jamal (2017), “Mechanical properties of recycled glass fibre reinforced nanoclay/unsaturated polyester composites.” International Journal of Advanced and Applied Sciences, 4(3): 1-6. Click Here
  4. S. K. Jamal, S. A. Hassan, K. J. Wong and M. Y. Yahya (2017), “Flexural and interlaminar shear study of hybrid woven kenaf/recycled GFRP (rGFRP) composites subjected to bending load.” International Journal of Advanced and Applied Sciences, 4(3): 45-50. Click Here
  5. Siti Khalijah Jamal, Shukur Abu Hassan, Wong King Jye, Umar Abdul Hanan, Mohd Nazrul Roslan (2017), “The influence of woven density on tensile properties of hybrid kenaf/glass composites.” Journal of Applied Environmental and Biological Sciences, 7(7):160-166. Click Here
  6. Iqbal Mokhtar, Mohd Yazid Yahya, Shukur Abu Hassan, and Carlo Santulli (2017), “Transverse impact response of filament wound basalt composite tubes.” Composites Part B: Engineering 128 (1). pp. 134-145. (IF=4.727). Click Here

Journal indexed in Scopus

  1. Iqbal Mokhtar, Mohd Yazid Yahya, Ab Saman Abd Kader and Shukur Abu Hassan (2014), “Experimental Analysis of Kenaf Filament Wound Tubes under Axial Compression Load.” Applied Mechanics and Materials Vol. 660 pp. 778-782. Click Here
  2. B. Abdi, S. A. Hassan, M. U. Wahit and U. A. Hanan (2014), “Tensile and Flexural Properties of Recycled Glass Fibre Reinforced Polyester Composites.” Materials Research Innovations Vol. 18 Suppl. 6 pp. S6-1-S6-3. Click Here
  3. S. Abu Hassan, Y. S. Ismail, A. R. Mohd. Sam, U. A. Hanan & M. U. Wahit (2015), “Shear Property of Structural Epoxy Adhesive Exposed to Tropical Weathering Condition.” Jurnal Teknologi, 77(8). 83-90. Click Here

Non Thomson Reuters/Non Scopus Journal

  1. Idris Ishak and Shukur Abu Hassan (1997), “Pembangunan Konsep Reka Bentuk Protatip Kereta Formula-M.” Jurnal Mekanikal, Jilid I. pp. 17-35. Click Here
  2. Idris Ishak and Shukur Abu Hassan (1997), “Pembuatan Panel Badan Kereta Lumba Formula-M Daripada Bahan Polimer Komposit (GFRP).” Jurnal Mekanikal, Jilid II. pp. 52-63. Click Here
  3. S. Abu Hassan (1998), “Kaedah-Kaedah Proses Pembuatan Menghasilkan Produk Berasaskan Bahan GFRP”, Jurnal Mekanikal, Jun 1998-FKM. Click Here
  4. S. Abu Hassan (1998), “ Projek Pembinaan Tangki Penyimpanan Air GFRP Muatan 40,000 Gelen (3 unit) di Sibu Island Resort, Mersing”, Jurnal Mekanikal, Disember 1998-FKM. Click Here
  5. Y. S. Ismail, S. Abu Hassan, A.S. Abd Kader and C.C. Lee (2004), “The Mode II Interlaminar Fracture Testing of Glass Fibre Reinforced Thermoset Composites”, Jurnal Mekanikal, Jun 2004. Click Here
  6. S. Abu Hassan, A. R. Mohd. Sam and Y. S. Ismail (2009), “Mechanical Test Rig Design for CRFP Plate Bonded of Concrete under Tropical Climate”, FKM Journal. Click Here
  7. Iqbal Mokhtar, Mohd Yazid Yahya, Ab Saman Abd Kader and Shukur Abu Hassan (2015), “Energy Absorption of Basalt Filament Wound Rectangular Tubes: Experimental Study.” In Applied Mechanics and Materials Vol. 711, pp. 201-205. Click Here
  8. Umar Abdul Hanan, Shukur Abu Hassan, Mat Uzir Wahit, Ahmad Raizal Md Rozali, Hj. Kamarul Bahrin Mohamad and Mohd Arif Mat Lazi (2016), “Mechanical properties of glass fibre waste/kenaf core reinforced unsaturated polyester eco-friendly composites.” Journal of Built Environment, Technology and Engineering, 1, 273-281. Click Here
  9. Nor Izzah Mokhtar, Shukur Abu Hassan, Yusof Ahmad, Nor Ashiqeen Jamaluddin and Balqis Omar (2016), “Finite element modeling of arcan testing method for ductile and brittle material under different loading configuration.” Journal of Built Environment, Technology and Engineering, 1, 289-298. Click Here
  10. K. Jamal, S. A. Hassan, K. J. Wong and U. A. Hanan (2016), “Mechanical properties of hybrid woven kenaf/recycled glass fibre reinforced polyester composites.” Journal of Built Environment, Technology and Engineering, 1, 335-344. Click Here
  11. Nor Izzah Mokhtar, Shukur Abu Hassan, Abdul Rahman Mohd. Sam, Yusof Ahmad & Balqis Omar (2017), “Bond performances between CFRP plate and steel plate to concrete prism using structural adhesives.” Malaysian Journal of Civil Engineering 29 Special Issue (1):37-55. Click Here