My Teaching Portfolio

 CONTENTS:

 

1.0 TEACHING RESPONSIBILITIES
2.0 TEACHING PHILOSOPHY
3.0 TEACHING METHODOLOGY
4.0 DESCRIPTION OF COURSES
5.0 EFFORTS TO IMPROVE TEACHING
6.0 STUDENT RATING / EVALUATION
7.0 PRODUCT OF TEACHING
8.0 HONORS AND RECOGNITION

 

1.0       TEACHING RESPONSIBILITIES

 

Since I started my career as academician in the Faculty of Civil Engineering UTM on 2007, I have involved in teaching activities inside and outside the campus. After almost 5 1/2 years serving as full-time lecturer/ senior lecturer, my teaching responsibilities can be summarized as follow;

 

  • Teaching responsibilities inside UTM

I have taught a total of 83 credit hours lectures for undergraduate and postgraduate students in Civil Engineering major. For Bachelor Degree Program, I teaches core subjects (Mechanics of Materials, and Research Methodology), as well as elective subjects (Wind and Earthquake Engineering). I am also involved as laboratory instructor for each semester (Structure Laboratory, and Concrete Laboratory) since 2013. As for postgraduate level, I teach Wind and Earthquake Engineering, Structural Seismic Maintenance; both are elective subjects. The subjects I’m teaching are mainly in the area of structural design and analysis. Details of all my classroom lectures are included in my Curriculum Vitae, CV.

Other than classroom teaching, I am also Course Coordinator for 3 subjects in the undergraduate and postgraduate level; Wind and Earthquake Engineering, and Structural Seismic Maintenance. I was assigned as academic advisor for undergraduate students since 2013 whom I monitored closely their academic progress and campus life. I have also served as examiner and panel of presentation for both undergraduate and postgraduate program. These include PhD/Master (Research) progress presentation, and Master (Thought Program) and Final Year Project dissertation.

Supervision of postgraduate students and final year bachelor degree students is also part of my responsibilities inside UTM. I have supervised 7 PhD students, 13 Master students, and 7 undergraduate students for their final year projects. 2 of my PhD student has graduated, 4 in their final semester, while most of my master and undergraduate students have completed their study/ dissertation. I have also supervised UTM’s group of students in national level competition (Open Ideas Competition) organized by Malaysian Structural Steel Association in 2013 and 2014, whom have been selected as top 5 finalists.

 

  • Teaching responsibilities outside UTM

Apart from lectures, supervision, and other services inside UTM, I have also been active in delivering courses, seminars, and workshop outside UTM. I considered this as part of my responsibilities as academician in spreading knowledges and latest findings with the society and engineering communities. I have delivered seminars/ workshops to engineers, architects, contractors, consultants, and other parties in construction industry in both national and international events. I have been invited as speaker for events conducted by the Ministry of Public Works of Malaysia, and Public Works Department of Sabah after the 2015 Sabah Earthquake to share my expertise and knowledge on the area of earthquake engineering and retrofit strategies. These include Seminar on Geotechnical Earthquake Engineering in 2016, and Forensic Engineering Investigation on Public Buildings due to Earthquake in 2015. It was an overwhelming experience to be able to share my findings with professional and practicing engineers on the topic interests me the most. I have been invited as speaker in international event; CCESE 2015 to present my latest research development in earthquake engineering.

I have also been writing and publishing original books for academic references and guidelines for engineers to disseminate knowledges among all parties involved in construction industry. My first book entitled Intelligent Bridge Inspection Rating was published in 2016. This book contains detail procedures for bridge inspection and advanced guideline for assisting bridge engineers/ inspectors to conduct inspection leading to an automated rating system. The release of this first book inspired me to write two more books; Vulnerability of Buildings under Earthquake, and Disaster Mitigation through Increase in Public Preparedness which is due to be completed in 2017. These books are written with an aim to disseminate knowledge among engineers, authorities, and publics in earthquake prone areas in Malaysia and other countries to increase their preparedness and reduce damages/ casualties. I believed knowledge can elevate the safety and quality of living among civilian and it is part of our responsibility as academician to make it happen.

As Fellow in the Institute of Noise and Vibrations; a serviced-based HiCOE, I have been involved in several consultation project in regular basis. I considered this as part of my responsibilities in transferring knowledge to the industry. In 2015, I have successfully secured a Knowledge Transfer Program fund from the Ministry of Higher Education to transfer technology of manufacturing a new rubber-based damper to Doshin Rubber (M) Sdn. Bhd. I find this as great opportunity to share findings from my research with the industry and help them to overcome limitations faced in their service. This project has also created job opportunity for my student whom currently working with the company.

In order to promote education, I have been active in education tour/ promotion to attract more students to register in UTM. In 2016, I represented UTM in the Educational Carnival in Pusat Matrikulasi Labuan to promote UTM intake among students undergoing matriculation in that campus. The even involved around 2000 students and more than 10 universities. My ability to speak the native Sabah language gives me the advantage to approach more students. I have also conduct promotion tour in the University of Isfahan during my personal trip to Iran in 2015 to promote UTM’s postgraduate program. Collaboration in postgraduate studies and research activities were initiated during this event between the Faculty of Civil Engineering, UTM and Shakesh Pajouh Research Institute, Iran.

 

2.0       TEACHING PHILOSOPHY

 

As an academician, I believed our responsibilities in teaching spread wider than inside classroom. Apart from university students, we are also responsible to educate the society and disseminate knowledge without borders. I believed an academician should take all the opportunity to share their knowledges for the betterment of the society and the nation. Academicians are responsible to increase their knowledges through continuous research and self-improvement so we are able to deliver our lectures and share our findings with consideration of recent trends. Teaching has to evolve to fulfil current needs and prepare our students to face the increasing challenges and demands. Academicians have huge role in the development of our nation and I considered my position in UTM as an opportunity for me to improve myself so I can help my society and country to move forward. My philosophies in teaching are described in the following sub-sections.

 

2.1       Delivering high quality of education is vital

Like most other sectors, education evolved with time. Input and education materials need improvement to ensure high quality of education is given inside or outside classroom. To ensure high quality of lectures, first and foremost I made thorough preparation and make sure that I am well-prepared. I believed I cannot make others understand the topic if I haven’t understand it fully. It is also important to get the students’/ audiences’ interest on the topic. I look into my research/ field works as way of making myself more knowledgeable so I can use my findings and share it during my lectures. It has been always more interesting to share the current scenarios and my own experiences. My teaching input and examples were also keeping on updated from time to time. I believed good research leads to good quality of lectures.

 

2.2       Students are valuable human capital

Students are my clients. Preparing them to be a good engineer and marketable graduate is my goal. I looked into my students as valuable assets to the country and it is part of my responsibility to ensure a competent and skilful human capital can be produced inside university. I always reminded my students to try to understand my lectures rather than memorizing it. Understanding the input and comprehensively grasping the knowledge will help them to be creative and able to think outside the box. It can also create independent and resourceful students that lead to entrepreneurial ship.

 

 2.3       Learning is a lifetime process

Education should not be limited to classroom teaching and learning nor it should be confined to certain level of degree. Learning is a lifetime process and everyone should have the opportunity to increase their knowledge to improve their works and lifestyle. As knowledge evolved and new skills or methods come to the market, I believed it is part of our responsibilities as academicians to help the industry to learn it and increase their capability. Skilful human capital and professionals will contribute to the development of our nation. Being able to teach practicing engineers and industry players through seminars or workshops motivates me to direct my research in such a way that it will benefit the society and improve quality of living.

 

2.4       Disseminate knowledge without borders

Knowledge should be shared for the betterment of humankind. Through sharing, people learn what they don’t know and improve their existing knowledge. I believed, writing is one of the methods that can disseminate knowledges without limit and educate more people. Books and journal publication are the method I used to share my knowledge to wider group of people.

 

2.5       Education increases quality of living  

Education is able to improve quality of living and development of a nation. I believed university plays vital role in promoting new innovation and technology to increase comfort level in the society. Apart from classroom lectures, academician has their own role and responsibilities to contribute to the society. Knowledge transfer from the university to the industry not only able to help in overcoming current limitations but it also may be able to open up new opportunity for business expansion.

  

3.0       TEACHING METHODOLOGY

 

In every lecture, be it inside or outside UTM, I delivered my knowledges in a simple, understandable and interesting manner. In order to ensure students are able to fully understand the topics, I would ask their understanding of the fundamental theory related to it. It normally takes me sometime in the beginning of each lecture to determine their understanding on the related topics before embarking on the main lectures itself. Details of the methodologies and approaches applied in my teaching are elaborated in the following sub-sections.

 

3.1       Usage of computer aided tools and multimedia

I used computer aided tools and software to facilitate my lectures alongside explanation that I normally depicted on the board in order to guide my students step by step. My lectures are given using power point slides and videos to make the session more interesting. For example, when teaching Wind and Earthquake Engineering subject, I shared some videos to show real strong wind and earthquake events to demonstrate their impact on structures (Fig. 1). Apart from this, I also use computer software for analyses and design purposes. Theoretical explanation will be given followed by examples that need to be solve manually and using software. Software application is used for the final design project in which students are given real project and thought to design it completely. For the purpose of learning the software application, I would allocate additional hands-on session and invite professional engineer to assist the learning process (Fig. 2). This gives the students motivation on applying their classroom lectures into real design project.

Fig. 1 Application of multimedia and videos during lectures

Fig. 2 Additional hands-on session for computer software application given by invited professional engineer

 

3.2       Usage of research/field works output

In delivering my lectures, I take advantage of using output from my research, field works and consultation services. These real projects examples increase students’ interest in the subject and they are able to relate the lectures with their surroundings. It also helps in motivating them to apply their knowledges in daily basis. In one of my lecture; Structural Seismic Maintenance, I uses the forensic investigation results from my field study on damaged buildings in Ranau after the 2015 Sabah Earthquake (Fig. 3). This case study is able to relate guidelines given in design standard with damages that occurs due to neglecting it. This session is always an eye-opener for the students and helps them to understand their responsibilities as engineer towards the safety of the community. Other than this, I also share some innovations produced from my research project and other advancement related to the lecture so the students will be updated with current development (Fig. 4). This has increased their interest and some had pursued their post-graduate studies/ project with me.

Fig. 3 Results from field investigation shared during lectures

 

Fig. 4 Innovation and outcome from research project shared during lecture

 

3.3       Students Involvement Inside and Outside Classroom

During my lectures, I encouraged my students to involve in discussion by asking questions or their opinion on the topic of the lecture. I usually start my lecture with an open discussion then lead them to the lecture. I often realised students are not keen to talk in the beginning but after giving them the opportunity to deliver their thought, the discussion was made easy. I also would start with their point of view and ask the others to comment on it. In one of my lecture; Research Methodology, I conducted a mock presentation at the end of the lecture in order to encourage students to express their understanding on their own research topic (Fig. 5). The other students will then ask questions as if they are the panel of the presentation. This helps the students to be more prepared. I also practiced case study as one of the method to encourage students’ involvement outside classroom. In the Seismic Maintenance course, each student is required to conduct seismic vulnerability assessment to five existing buildings in Johor Bahru to assess their understanding on the lectures given (Fig. 6). This method increases their interest in the topic as they can relate the lecture with their environment.

Fig. 5 Mock-presentation by students in Research Methodology class

Fig. 6 Case study conducted to encourage students’ field work experiences

 

3.4       Seminars, workshops, and hand-on session

Other than delivering my lecture inside classroom, I also conducted seminars and workshops outside UTM. This is conducted with a specific target of audiences which usually comes from the industry. One of the lectures that I delivered was in the topic of seismic vulnerability assessment of public buildings. These lectures are conducted as in-house training to the clients or in a bigger seminar hall with invited parties from different background. In 2015, I delivered a lecture in a seminar conducted by the Ministry of Works of Malaysia together with other experts on Geotechnical Earthquake Engineering (Fig. 7). This type of bigger scale seminar could disseminate knowledge to a larger group of audiences.

Fig. 7 Seminar and workshop conducted for practicing engineers and other related parties in construction industry

 

3.5       Books and guidelines

Apart from lectures, I also use publication as one of the methods to disseminate information and teaching. I have published and currently writing more books on structural inspection and vulnerability assessment of structures. I have also written guideline for disaster management and increase in public awareness in seismic prone areas. This method can spread knowledge to a broader group of people. My first book published entitled Intelligent Bridge Inspection Rating targeted practicing engineers, technicians as well as academic community (Fig. 8). This book contains an in-depth and thorough explanation on bridge inspection.

Fig. 8 Original book published for academic purposes and practicing engineers’ usage

 

3.6       Knowledge Transfer Program

Knowledge Transfer Program is another approach I implied to fulfil part of my teaching responsibilities to the industry and community. This program allows me to deliver specific knowledge that benefit or demanded by the industry. In this program (Fig. 9), I transfer the knowledge of manufacturing rubber-based damper to Doshin Rubber (M) Sdn. Bhd. with an aim to help the company to fulfil current market demand for an effective and cost-competitive damper. Through this program also, I approached the Public Works Department, PWD of Sabah to educate them on the seismic retrofitting methods to increase safety level of public buildings on seismic prone areas. This method is able to promote life time learning in the industry and community.

Fig. 9 Knowledge Transfer Program for industry and local authority

 

3.7       Educational Roadshow

Apart from all the teaching activities describe above, I also make use of some roadshow and tours to promote education and continuous learning inside and outside the country. These events are used to educate students on the prospect of continuing education and post-graduate studies. In 2016, I participated in the Education Carnival in Matriculation Centre of Labuan to promote education and enrolment to UTM’s program. During this program, information are disseminate among 2000 students to help them choose the most suitable bachelor degree program (Fig. 10). I have also conducted educational tour outside the country. For example in 2015, I conducted a session in the University of Isfahan Iran to deliver information on post-graduate program in UTM (Fig. 11).

Fig. 10 Education tour inside the country

Fig. 11 Education tour outside the country

 

4.0       DESCRIPTION OF COURSE

 

Descriptions of the courses that I teach inside UTM are given in the following sub-sections. These courses are offered as core subject and elective subjects for bachelor and post-graduate students in the Civil Engineering Faculty.

 

  • MKAE 1113 Wind and Earthquake Engineering

MKAE 1113 is one of the optional courses offered in Master of Structural Engineering Program. This course is divided in two parts; wind engineering, and earthquake engineering. It covers analyses and design procedures for wind and seismic load based on design codes; IBC and Eurocode. The course starts with some introduction on basic seismology and earthquake/wind effects on structures. Design parameters in design codes are explain together with the ductile detailing of structural components. This course also focuses on the usage of IBC and Eurocode in seismic/wind design of building. Towards the end of the course, students are exposed to the application of computer software in seismic and wind design. Hands on session will be provided in order to assist students in the preparation of their design project. This course aimed to assist students to have advanced knowledge in the analyses and design of structures under wind and earthquake excitation.

 

  • MKAE 1123 Structural Seismic Maintenance

MKAE 1123 is another optional courses offered in Master of Structural Engineering Program. This subject covers topic related to seismic induced damages, evaluation procedure for seismic, seismic retrofit strategies, and computer simulation for seismic retrofit method. Real case study and forensic investigation of seismic damages on local structures/ infrastructures are also included. In this course, students are given project that requires them to do field works; to investigate seismic vulnerability of existing structures and propose retrofitting method that suitable for the structure.  This course is aimed to equipped students with knowledge of evaluating structures’ vulnerability level towards earthquake and prepares retrofitting strategies to increase the safety level.

 

  • SKAA 4263 Wind and Earthquake Engineering

SKAA 4263 is an elective subject offered in Bachelor of Civil Engineering Program and is available to final year students. This subject is similar to the Wind and Earthquake Engineering course (MKAE 1113) offered in the post-graduate level. It is aimed to produce graduates with additional skills in design and analysis work.

 

  • SKAA 4042 Research Methodology

This is one of the core subjects for final year students in the Bachelor of Civil Engineering Program. This subject aims to expose students to the essential aspects in research works. It provides introduction to research, methods for literature review, methodologies in research, data analyses, and writing up research proposal. This subject helps students in completing their Final Year Project.

 

5.0       EFFORTS TO IMPROVE TEACHING

 

As education and knowledges evolved with time, I take it as my responsibilities to equipped myself with the latest development and improve my teaching skills from time to time. My research activities and consultation works offer me the means of increasing my knowledge in the area of my expertise and provide me the ability to share the recent output with my students. I also take the opportunity to attend several courses and workshops that could help me to increase my skills. These include the following workshops and seminars;

  • Outcome Based Education; Assessment and CQI Workshop, 25 April 2016 – Organized by Faculty of Civil Engineering, UTM JB.
  • Geotechnical Earthquake Engineering in Malaysia, 1-2 March 2016, Kuala Lumpur. –Organized by Ministry of Works Malaysia.
  • Tall Buildings and Their Design Challenges, 23rd February 2016. Johor Bahru. -Organized by Center for Forensic Engineering.
  • Seismic Design of Structures in Accordance with Eurocode 8, 6-7 November, 2015, Johor Bahru. –Organized by The Institution of Engineers Malaysia, IEM, Southern Branch.
  • Structural Investigations on Damaged Buildings due to Sabah Earthquake and Available Retrofit Strategies, 1st August, 2015, Johor Bahru. –Organized by The Institution of Engineers Malaysia (IEM) Southern Branch.
  • 2015 Sabah Earthquake; Structural Forensic Investigations and Retrofit Strategies, 9th July 2015, Kuala Lumpur. –Organized by Public Works Department, PWD.
  • Health Monitoring of Civil Structures. 3rd October 2015. Johor Bahru, Universiti Teknologi Malaysia. –Organized by Center for Forensic Engineering.
  • Seismic Design of Structures, Eurocode, Performance Based Design and Fragility Curves. 5-6 March 2014, Kuala Lumpur. –Organized by Malaysian Structural Steel Association.
  • Performance Based Seismic Design. 21-22 January 2014, Johor Bahru. –Organized by UTM Engineering Seismology and Earthquake Engineering Research Group.
  • ANSYS Training Workshop & IT Application in Civil Engineering. 7-8 March 2014, Johor Bahru. –Organized by Universiti Teknologi Malaysia.

 

6.0       STUDENT RATING / EVALUATION

 

Based on the online Teaching Evaluation; UTM e-PPP system, students have given positive feedback towards my teaching. For the past 9 semesters (since 2013), I have scored an average overall rating of 4.6 and ranked up to P5 in UTM level. Some of the comments given by students include the following;

 

7.0       PRODUCT OF TEACHING

 

In most of the course I thought, students’ learning is assessed through formative/ continuous assessment (60%) by means of test, project, case study, and assignments together with summative assessment at the end of the semester (40%) by means of final examination. I am satisfied that every semester, 100% of my students in every course passed the assessment given. Some of the students approached me to conduct their dissertation project as well. All of the students that I have supervised during their final project were offered job in distinguish private company and government sector right after their graduation.

 

8.0       HONORS AND RECOGNITION

 

Since 2013, I have received several awards and recognition with regards to my teaching and services to the university (as listed in my CV). These include Anugerah Perkhidmatan Cemerlang (Faculty of Civil Engineering) and Anugerah Citra Karisma (Universiti Teknologi Malaysia). I have also been invited as speaker in national and international events to share my knowledge in the area of my expertise. These motivated me to continuously improve myself and make advancement in my career for the betterment of my society.

UTM Open Day