Journal Papers

  1. Thahe, A. A., Bakhtiar, H., Ali, B. A., Hassan, Z., Bidin, N., Bououdina, M., … & Uday, M. B. (2018). Photophysical performance of radio frequency sputtered Pt/n-PSi/ZnO NCs/Pt photovoltaic photodetectors. Optical Materials, 84, 830-842.
  2. Hwa, L. C., Uday, M. B., Ahmad, N., Noor, A. M., Rajoo, S., & Zakaria, K. B. (2018), “Integration and fabrication of the cheap ceramic membrane through 3D printing technology“. Materials Today Communications, 15, 134-142.
  3. Mohammed Razzaq, A., Majid, D. L., Ishak, M. R., & Basheer, U. M. (2017). Effect of Fly Ash Addition on the Physical and Mechanical Properties of AA6063 Alloy Reinforcement. Metals, 7(11), 477.
  4. Hwa, Lim Chin, Srithar Rajoo, Alias Mohd Noor, Norhayati Ahmad, and M. B. Uday. “Recent advances in 3D printing of porous ceramics: A review.” Current Opinion in Solid State and Materials Science (2017).
  5. Razzaq, Alaa Mohammed, Dayang Laila Abang Abdul Majid, and M. R. Ishak. Uday M. B. “A Brief Research Review for Improvement Methods the Wettability between Ceramic Reinforcement Particulate and Aluminium Matrix Composites.”,IOP Conference Series: Materials Science and Engineering, 2017.
  6. Alaa Mohammed Razzaq, Dayang Laila Majid, M.B. Uday, M.R. Ishak and Nurain Hashim, 2017. Effect of Equal Channel Angular Pressing on Yield Stress and Fatigue Properties of Al 6063 Alloy. Journal of Engineering and Applied Sciences, 12: 2143-2147.
  7. Abubakar, Muazu, Uday Basheer, and Norhayati Ahmad. “Mesoporosity, thermochemical and probabilistic failure analysis of fired locally sourced kaolinitic clay.” Journal of the Association of Arab Universities for Basic and Applied Sciences (2017).
  8. Safarzadeh, Marjan, Ahmad Fauzi Mohd Noor, and Uday M. Basheer. “Effect of friction speed on the properties of friction welded Alumina-Mullite Composite to 6061 Aluminum alloy” Journal of the Australian Ceramic Society Volume 52, no. 2 (2016): 134-142.
  9. Abbas, M. R., Uday, M. B., Noor, A. M., Ahmad, N., & Rajoo, S. (2016). Microstructural evaluation of a slurry based Ni/YSZ thermal barrier coating for automotive turbocharger turbine application. Materials & Design, 109, 47-56.  ISI, IF=3.997 Q1    Cited by 0
  10. Muazu Abubakar, Mohd Nasir Tamin, Muneer Aziz Saleh, Uday M. B., Norhayati Ahmad,”Preparation and Characterization of a Nigerian Mesoporous Clay-Based Membrane for Uranium Removal from Underground Water“, Ceramics International,In Press, 2016.        ISI, IF=2.605 Q1    Cited by 0
  11. Uday M. B., M. N. Ahmad-Fauzi, Alias Mohd Noor, and Srithar Rajoo. “An insight into microstructural evolution during plastic deformation in AA6061 alloy after friction welding with alumina-YSZ composite.” Mechanics of Materials 91 (2015): 50-63.               ISI, IF =2.329 Q1     Cited by 2
  12. Dawood, Hasan I., Kahtan S. Mohammed, Azmi Rahmat, and Uday M. B. “The influence of the surface roughness on the microstructures and mechanical properties of 6061 aluminium alloy using friction stir welding.” Surface and Coatings Technology (2015). ISI, IF =1.998  Q1  Cited by 7
  13. I. Dawood, Kahtan S. Mohammed, Azmi Rahmat, M. B. Uday, “Effect of small tool pin profiles on microstructures and mechanical properties of 6061 aluminum alloy by friction stir welding“, Trans. Nonferrous Met. Soc. China 25(2015) PP.2856−2865.  ISI, IF =1.178   Q2     Cited by 4
  14. I. Dawood, Kahtan S. Mohammed, Azmi Rahmat, M.B. Uday, “Microstructural Characterizations and Mechanical Properties in Friction Stir Welding Technique of Dissimilar (Al-Cu) Sheets” J. Appl. Sci. & Agric., 10(5): 149-158, 2015.
  15. Muhammad Rabiu Abbas, Alias Mohd Noor*, Srithar Rajoo,Norhayati Ahmad, Uday M. Basheer and Muhammad Hanafi Md Sah, “Thermal Conductivity and Specific Heat Capacity of Different Compositions of Yttria Stabilized Zirconia-Nickel Mixtures” , Advanced Materials Research Vol 1119 (2015) pp 783-788.
  16. Alias Mohd Noor, H. D. Rosnizam CHE PUTEH, Srithar RAJOO, Uday M. Basheer, Muhammad Hanafi MD SAH, and Sheikh Hussain SHAIKH SALLEH. “Simulation Study on Electric Turbo-Compound (ETC) for Thermal Energy Recovery in Turbocharged Internal Combustion Engine”, Applied Mechanics and Materials, Vol. Applied Mechanics and Materials.
  17. Alias Mohd Noor*, Rosnizam Che Puteh, Ricardo Martinez-Botas, Srithar Rajoo, Alessandro Romagnoli, Uday M. Basheer, Muhammad Hanafi Md Sah, “Heat Energy Recovery from Internal Combustion Engine: A Review” Accepted in NTMRP-2015 conference and will publish in ISI journal.
  18. Uday, M. B., and M. N. Ahmad-Fauzi. “Joint properties of friction welded 6061 aluminum alloy/YSZ–alumina composite at low rotational speed.” Materials & Design Journal 59 (2014): 76-83. ISI, IF =3.501 Q1    Cited by 4
  19. Basheer, Uday M., M. N. Ahmad Fauzi, A. B. Ismail, and H. Zuhailawati. “Effect of friction time on the properties of friction welded YSZ-alumina composite and 6061 aluminum alloy” QScience Connect 2013 Cited by 1
  20. Uday M. Basheer, Ahmad-Fauzi Mohd Noor, “Microstructural Development in Friction Welded Aluminum Alloy with Different Alumina Specimen Geometries“, Friction and Wear Research, 1 (2013). Cited by 2
  21. Uday M. B., Ahmad Fauzi M. N., Zuhailawati H, Ismail AB. “Thermal analysis of friction welding process in relation to the welding of YSZ-alumina composite and 6061 aluminum alloy“. Applied Surface Science Journal, 2012, 258(20): p.8264-8272.          ISI, IF = 2.711 Q1       Cited by 8
  22. Uday M.B., Ahmad Fauzi, M. N., Zuhailawati, H., Ismail, A. B., “Evaluation of interfacial bonding in dissimilar materials of YSZ-Alumina composites to 6061 aluminium alloy using friction welding“. Materials Science and Engineering: A, 2011.528(25):p.1348-1359. ISI, IF = 2.567 Q1     Cited by 10
  23. Uday, M.B., Ahmad Fauzi, M. N., Zuhailawati, H., Ismail, A. B., “Effect of welding speed on mechanical strength of friction welded joint of YSZ-alumina composite and 6061 aluminium alloy“. Materials Science and Engineering: A, 2011. 528(13-14): p. 4753-4760. ISI, IF = 2.567 Q1 Cited by 17
  24. Uday, M.B., Ahmed Fauzi, M. N., Zuhailawati, H., Ismail, A.B, “Effect of Deformation Behavior on the Grain Size of the 6061 Aluminium Alloy Joint with Alumina by Friction Welding“. Applied Mechanics and Materials, (ISSN: 1660-9336), 2011. 83: p. 97-103. ISI,   Cited by 2
  25. Ahmad Fauzi, M.N., Uday M. B., Zuhailawati, H., Ismail, A. B., Microstructure and mechanical properties of alumina-6061 aluminium alloy joined by friction welding. Materials & Design Journal, 2010. 31(2): p. 670-676. ISI, IF =3.501  Q1   Cited by 45
  26. Uday M. B., Ahmad Fauzi M. N., Zuhailawati, H., Ismail, AB, “Advances in friction welding process: a review“. Science and Technology of Welding & Joining, 2010. 15(7): p. 534-558. ISI, IF =1.707 Q1 Cited by 58.