https://www.theguardian.com/world/2017/sep/15/north-korea-us-military-option-nuclear-tests
Archives for September 16, 2017
will Jacinda Ardern be New Zealand’s next prime minister?
September 16, 2017 by 2 Comments
https://www.theguardian.com/world/2017/sep/15/jacinda-ardern-new-zealand-election-campaign
Pakistan man sentenced to death for ridiculing Prophet Muhammad on WhatsApp
September 16, 2017 by Leave a Comment
https://www.theguardian.com/world/2017/sep/16/pakistan-man-sentenced-to-death-for-ridiculing-prophet-muhammad-on-whatsapp
‘Humanitarian catastrophe’ unfolding as Myanmar takes over aid efforts in Rakhine state
September 16, 2017 by Leave a Comment
https://www.theguardian.com/global-development/2017/sep/15/humanitarian-catastrophe-unfolding-as-myanmar-takes-over-aid-efforts-in-rakhine-state-rohingya
Graduated
September 16, 2017 by Leave a Comment
| No | Name of student | Mode / Project title | Year | Status | |
| 1 | Abdul Nasir Hairuman (main supervisor) | An investigation on the temperature effects on reaction kinetics of high carbon steel in molten zn-al-mg system made by hot-dip galvanizing | 2019 | Graduated | |
| 2 | Mohd Afiqh Hidayat Mohd Rahimi (main supervisor) | An investigation on reaction kinetics of intermetallic reaction layers (irl) on high carbon steel at various amount of mg in zny-al(5-x)-mgx (zam) molten bath | 2019 | Graduated | |
| 3 | Mohd Hedir Abdul Rashid (main supervisor) | Modelling and prediction of fretting wear of steel wire rope at various helix angle | 2019 | Graduated | |
| 4 | Nik Aina Shafika Nik Azmi (main supervisor) | simulation on fatigue behaviour of steel wire at various diameters | 2019 | Graduated | |
| 5 | Nur Najwa Osman (main supervisor) | G number effect on mechanical and microstructural properties of aluminium alloys (lm6) hollow tube made by centrifugal casting method | 2019 | Graduated | |
| 6 | Syaizarul Syahmi Mohd Nazri (main supervisor) | Simulation on wear performance of zirconia toughened alumina (zta) cutting insert: from low to high-speed turning | 2019 | Graduated | |
| 7 | Nor Najwa Izzati Inche Ali (main supervisor) | simulation of shrinkage defect formation of aluminium alloy (lm6) made by centrifugal casting method; effect of pouring temperature and rotational speed | 2019 | Graduated | |
| 8 | Norhaziqah Hasim (main supervisor) | effect of temperature on growth of pseudomonas aeruginosa and its corrosion effect on steel wire rope | 2019 | Graduated | |
| 9 | Nur Syuahada Azmi (main supervisor) | ph effect microbial corrosion of high carbon steel induced by pseudomonas aeruginosa sp. | 2019 | Graduated | |
| 10 | Mohd Ihsan Shukri (main supervisor) | Wear performance and mechanical properties of zta cutting tool insert with various turning speed | 2019 | Graduated | |
| 11 | Ahmad Amirul Ashraf B Abdul Halim
(main supervisor) |
Phase formation and sintering of YAG by microwave sintering | 2017 | Graduated | |
| 12 | Mohamad Faizie B Abdullah (main supervisor) | Design and development of a small scale hot-dip galvanizing system for wire-rope applications | 2017 | Graduated | |
| 13 | Hisyamuddin Hanif B Ahmad (main supervisor) | Structural investigation of rare earth (ra) doped yttrium iron garnet (YIG) made by solid state reaction | 2017 | Graduated | |
| 14 | Md Rozie B Shafie (main supervisor) | The effect of nbo on the physical microstructure and mechanical properties of YSZ toughened alumina | 2017 | Graduated | |
| 15 | Qhairul Aidiil B Zizan (main supervisor) | Yttrium iron garnet (YIG) doped Sm for high frequency design of dielectric resonator antenna (DRA) application | 2017 | Graduated | |
| 16 | Raja Azlan Amirul B Raja Mat (main supervisor) | Structural investigation of praseodymium (Pr) doped yttrium aluminium garnet (YAG) made by solid state reaction | 2017 | Graduated | |
| 17 | Muhammad Faiz B Ashri (main supervisor) | Sintering and grain growth control of YIG by microwave sintering | 2017 | Graduated |
Final Year Projects
September 16, 2017 by Leave a Comment
Master students
September 16, 2017 by Leave a Comment
|
No |
Name of student | Mode / Project title | Year | Status |
| 1 |
Ikhwan Hafiz Hassan |
The effect of alloy layer on the corrosion resistance of galvanized steel wire rod for offshore mooring and crane rope applications |
2017 |
Completed |
| 2 |
Mohd Hanif Naif |
Stabilization of Zn-Al-Mg Coating for Mass Production |
2017 |
Completed |
| 3 |
Siti Suhailah Binti Khairullah |
Effect of heat treatment to microstructure and mechanical properties of Al-Cu-Fe quasi crystal alloys |
2016 |
Completed |
| 4 |
Musfirah Binti Mokhtar |
Investigation of the structural and mechanical properties of zirconia in the presence of silica for biomedical applications |
2016 |
pending |
Book Chapters
September 16, 2017 by Leave a Comment
Book Chapters
| No | Authors, year, title, publisher/journal/conference, volume and number of pages |
Level |
| 1 | Zainal Arifin Ahmad, Meor Yusoff Meor Sulaiman, Mohd Ambar Yarmo, Fauziah Abd Aziz, Khairul Nizar Ismail, Norazharuddin Shah Abdullah, Yusof Abdullah, Wan Fahmin Faiz Wan Ali, Nik Akmar Rejab, and Abdul Rashid Jamaludin, Development and Investigation of Materials Using Modern Techniques, Trans Tech Publications, Switzerland, 2016. (ISI/SCOPUS Cited Publication) | International |
Conference Proceedings / Non-Indexed Journal
September 16, 2017 by Leave a Comment
- Abu Bakar Kazeem, Nor Azam Badarulzaman, Wan Fahmin Faiz Wan Ali (2020), Optimization of Wear and Hardness of Al-Zn-Mg-Cu Alloy Fabricated from Recycled Beverage Can using Response Surface Methodology, SN Applied Sciences, 2020 pp. 1-11
- Mohamad Rizuan Mohamd Kamal, N.F. Bazilah, Augestine Luhat, Mohd Hasbullah Idris, Mohd Suhaimi Salleh, Wan Fahmin Faiz Wan Ali, Effect of semi-solid forming temperature and heat treatment on mechanical properties of Mg-Al-Zn Alloy (AZ91D) for automotive application, Proceedings of Mechanical Engineering Research Day 2019, pp. 28-29, August 2019
- Wan Fahmin Faiz Wan Ali*, Maslinda Kamarudin, Izman Sudin, Nik Akmar Rejab, Mohd Fadzil Ain, Norazharuddin Shah Abdullah And Zainal Arifin Ahmad (2018) Structural Evolution of YIG during Microwave and Conventional Sintering at 1000 ºC, International Journal of Current Science, Engineering & Technology, 10.30967/ijcrset.1.S1.2018.435-440, pp 435-440
- Chee Wayne Tan, Joy Rizki PANGESTU Djuansjah*, Mohd Hasbullah Idris, and Wan Fahmin Faiz Wan Ali (2018) Characterisation of Al65Cu20Fe15 Quasicrystal Alloy Synthesised via In-situ Casting under Standard Room Ambient and Argon Enriched Atmosphere, International Journal of Current Science, Engineering & Technology, DOI: 0.30967/ijcrset.1.S1.2018.280-286, pp. 280-286.
- Musfirah Mokhtar, Wan Fahmin Faiz Wan Ali, Joy Rizki Pangetsu Djuanshah, Influence of Silica Content on the Stabilization of Tetragonal Zirconia for Biomedical Application, International Conference on X-ray and Related Techniques in Research and Industry (ICXRI’18), Grand Riverview Hotel, Kelantan, 17-18 August 2018
- Qhairul Aidil Zizan, Raja Azlan Amirul Raja Mat, Hisyamuddin Hanif Ahmad, Ahmad Amirul Ashraf Abdul Halim, Mohammadariff Othman, Wan Fahmin Faiz Wan Ali, Dielectric Resonator Antenna (DRA) made of Yttrium Iron Garnet for 5G Applications, International Conference on X-ray and Related Techniques in Research and Industry (ICXRI’18), Grand Riverview Hotel, Kelantan, 17-18 August 2018, Malaysia
- Yap Tek Hong, Mohd Hasbullah Idris, Wan Fahmin Faiz Wan Ali, Verification of in house design for horizontal true centrifugal casting machine via aluminium alloy casting, International Conference on X-ray and Related Techniques in Research and Industry (ICXRI’18), Grand Riverview Hotel, Kelantan, 17-18 August 2018,
- MalaysiaMohamad Faizie Abdullah, Md Rozie Shafie, Muhammad Faiz Ashri, Wan Fahmin Faiz Wan Ali, The interaction between Zn-Al bath and wire rod with various cooling temperature; CFD Approach. International Conference on X-ray and Related Techniques in Research and Industry (ICXRI’18), Grand Riverview Hotel, Kelantan, 17-18 August 2018
- Wan Fahmin Faiz Wan Ali, Nik Akmar Rejab, Norazharuddin Shah Abdullah and Zainal Arifin Ahmad. Effect of microwave and conventional heating and YIG formation mechanism at 1000oC. Advanced Materials Characterization Technique 2017 (AMCT’17) Awana Resort, Genting Highlands, 16-17 August 2017, Malaysia
- Tan Chee Wayne, Joy Rizki Pangestu Djuanshah, Mohd Hasbullah Idris, Wan Fahmin Faiz Wan Ali. Characterisation of Al65Cu20Fe15 Quasicrystal Alloy Synthesized via In-situ Casting Under Standard Room Ambient and Argon Enriched Atmosphere in Advanced Materials Characterization Technique 2017 (AMCT’17) Awana Resort, Genting Highlands, 16-17 August 2017, Malaysia
- Wan Fahmin Faiz Wan Ali, Norazharuddin Shah Abdullah, And Zainal Arifin Ahmad, “Structural investigation of Y3Fe5-x(x.Y)O12 (X = 0.0, 0.3, 0.5, 1.0; Y = In3+ and Te3+) Synthesized From Conventional Solid State Routes, Proceedings of the International Conference on X-Rays and Related Techniques in Research and Industry 2016 (ICXRI2016) Dorsett Hotel, Putrajaya, 17–18 August 2016.
- Mohamadariff Othman, Wan Fahmin Faiz Wan Ali, Mohd Fadzil Ain, Zainal Arifin Ahmad and Mastaneh Mokayef, “Low Permittivity Dielectric Resonator Antenna (DRA) for Future 5G Applications, Proceeding of the 12th Malaysia International Conference on Communications (MICC) , IEEE-Antennas, Propagation and RF Design (MICC 2015), The Hilton Kuching, Sarawak, .23-25 November 2015
- Wan Fahmin Faiz Wan Ali, Norazharuddin Shah Abdullah, Mohd Fadzil Ain, Zainal Arifin Ahmad, Particle Size Effect on the YIG Formation made by Solid State Sintering, Proceeding of the Seminar on Advanced Materials Characterization in Research, Industry and Nuclear Applications 2015 (AMCT 2015), Palace of the Golden Horses, Seri Kembangan, Kuala Lumpur, 9-10 June 2015
- Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Ihsan Zubir, Hasnul Hakimi Ahmad, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, Zainal Arifin Ahmad. Effect of the Addition CeO on the Structural, Microstructural, and Dielectric Properties Polycrystalline YIG. Proceedings of the International Conference on X-Rays and Related Techniques in Research and Industry 2014 (ICXRI2014) KSL Hotel, Johor Baru, 11-13 August 2014.
- Mohamadariff Othman, Mohd Fadzil Ain, Ihsan Ahmad Zubir, Wan Fahmin Faiz Wan Ali, Zainal Arifin Ahmad, Study on the Effect of Dielectric Structure to the Cylindrical Dielectric Resonator Antenna (DRA). Proceedings of the 8th International Conference on Robotics, Vision, Signal Processing, and Power Applications (ROVISP 2013), Park Royal Hotel, Penang 10-12 Nov 2013
- Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, and Zainal Arifin Ahmad, The Size Effect of Fe2O3 Reveals Particle-Phase Chemistry in the Formation of YIG Ceramics by Solid State Reaction. Proceedings of the 22nd Scientific Conference of the Microscopy Society Malaysia (MSM2013), Primula Beach Hotel, Kuala Terengganu, Terengganu, 26 –28 Nov. 2013
- Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, and Zainal Arifin Ahmad, Effect of The Firing Properties on Formation of YIG Prepared Through Simple Processing Technique. Proceedings of the 21st Scientific Conference of the Microscopy Society Malaysia (MSM2012), Renaissance Hotel, Kota Bharu, Kelantan 22–24 Nov. 2012
- Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Nik Akmar Rejab, Mohd Zaid Abdullah, Arjuna Marzuki, Sabar Derita Hutagalung, Julie Juliewatty Mohamed, Mohd Fadzil Ain, 5Norazharuddin Shah Abdullah, Zainal Arifin Ahmad. Electrical properties of Ba0.3Sr0.7ZrO3 Thick Films Derived from Sol-gel Route at High-Frequency Response (1MHz-1GHz). Proceedings of the International Conference on X-Rays and Related Techniques in Research and Industry 2012 (ICXRI2012) Vistana Hotel, Penang 3-5 July 2012
- Norazharuddin Shah Abdullah, Siti Kartini Enche Ab Rahim, Wan Fahmin Faiz Wan Ali, Getting to Know Plagiarism. Buletin Enjineur 2012, School of Materials and Mineral Resources Engineering, USM-Engineering Campus, 14300 Nibong Tebal, Penang
- Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, and Zainal Arifin Ahmad, Effect of The Firing Properties on Formation of YIG Prepared Through Simple Processing Technique. Proceedings of the 21st Scientific Conference of the Microscopy Society Malaysia (MSM2012), Renaissance Hotel, Kota Bharu, Kelantan 22–24 Nov. 2012
- Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Mohd Fadzil Ain, and Zainal Arifin Ahmad, Effect of Sintering Properties in the Formation of Yttrium Iron Garnet through Solid Phase Synthesis For Microwave Ferrite Resonator Antenna. Proceedings of Nuclear Science, Technology and Engineering Conference 2012 (NUSTEC2012), TNB Research, Kajang, Selangor 21-23 May 2012
- Wan Fahmin Faiz Wan Ali, Mohd Fadzil Ain and Zainal Arifin Ahmad, Effect of Sintering Properties in The Formation of Yttrium Iron Garnet Through Solid Phase Synthesis For Microwave Ferrite Resonator Antenna, Journal of Nuclear Science and Related Technologies, (2012) Vol. 9, No. 2, pg. 47-55. (JNRT2012-9-2-07.pdf)
Journal Article
September 16, 2017 by 1 Comment
| INDEXED ARTICLE (ISI & SCOPUS)
1. Abu Bakar Kazeem, Nur Azam Badarulzaman, Wan Fahmin Faiz Wan Ali (2020) Linking Spectrograph to Mechanical and Physical Properties of X7475 Experimental Alloys Produced From Recycling Beverage Cans For Bumper Beam Applications, Materials Science Forum, vol 1010, pp. 52-57. https://doi.org/10.4028/www.scientific.net/MSF.1010.52 2. Norlin Nosbi, Haslan Fadli Ahmad Marzuki, Muhammad Razlan Zakaria, Wan Fahmin Faiz Wan Ali, Fatima Javed, Muhammad Ibrar, (2020) Structure Property Investigation of Glass-Carbon Prepreg Waste-Polymer Hybrid Composites Degradation in Water Condition, Processes, vol 8(11), pp. 2-13. 3. Nik Akmar Rejab, Nurul Khairunnisa Su, Wan Fahmin Faiz Wan Ali, Mohd Fadzil Ain, Zainal Arifin Ahmad, Norazharuddin Shah Abdullah (2020) Structural Characteristic and Dielectric Properties of Zirconia Toughened Alumina, Materials Science Forum, vol 1010, pp. 250-255. 4. Abu Bakar Kazeem, Nur Azam Badarulzaman, Wan Fahmin Faiz Wan Ali (2020) Fit Mix Effect Modelling of Physio-Mechanical Properties Of Experimental Al-Zn-Mg-Cu Alloy Stir-Cast From Recycled Beverage Can, IOP Conference Series: Materials Science And Engineering, Vol 884(1), pp. 012117- 012127 5. Ahmad Amirul Ashraf Abdul Halim, Izman Sudin, Wan Fahmin Faiz Wan Ali, Roslin Yasak, Rozlina Md. Sirat, Mohamad Ariff Othman, Norazharuddin Shah Abdullah, Zainal Arifin Ahmad (2020) Formation of Yttria Aluminium Garnet By Microwave Sintering, Materials Science Forum, vol 1010, pp 222-227, https://www.scientific.net/MSF.1010.222 6. Nurhaziqah Hasim, Nur Syuhada Azmi, Wan Fahmin Faiz Wan Ali, Esah Hamzah, Adibah Yahya, Muhammad Azizi Mat Yajid, Norlin Nosbi, (2020) Temperature Effect on Pseudomonas Aeruginosa Growth and Its Presence on Corrosion of Steel Wire Rope, Materials Science Forum, vol 1010, pp. 92-97. 7. Hamidreza Ghandvar, Wan Fahmin Faiz, Tuty Asma Abu Bakar, Mohd Hasbullah Idris (2020) The Simultaneous Effect of Extrusion Ratio And Solution Heat Treatment on the Microstructure and Tensile Properties of Extruded Al-15%Mg2si-1.0%Gd Composite, Materials Science Forum, vol 1010, pp 166-171 8. Abubakar Kazeem, Amkpa Job Ajala, Nur Azam Badarulzaman, Wan Fahmin Faiz Wan Ali, Okorie Maduako Ammanuel, Effect of Annealing and Artificial Ageing Parameters on the Ultimate Tensile Strength and Elongation of New Al-(4-5) Zn-Mg-Mn-Cu Alloys Fabricated Using Recycled Beverage Cans International Journal of Integrated Engineering, vol 12(8) pp 130-140. 9. Abubakar Kazeem, Nur Azam Badarulzaman, Wan Fahmin Faiz Wan Ali, Effect of Heat Treatment on Modulus Hardening and Phase Transformation in Experimental 7xxx Stir-Cast Alloy from Recycled Beverage Cans, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2020.05.615 10. Teo Wei Na1, Fathin Asila Mohd Pabli, Syifa’ Muhamad Sharifuddin1, Mohd Shukri Mat Nor, Wan Fahmin Faiz Wan Ali, Muhammad Azwadi Sulaiman, Effect of Calcination Time on the Microstructure and Dielectric Properties of CaCu3Ti4O12 using Enhanced Microwave Processing, Malaysian Journal of Microscopy, Vol 16(1). Pg. 81-93 11. Khairul Fikri, Bin Tamrin and Muhammad Thalhah, Bin Zainal and Mohd Fairus, Bin Mohd Yasin and Wan Fahmin Faiz, Bin Wan Ali and Mohd Hanafi, Bin Ani (2020), Carbon precursor analysis for catalytic growth of carbon nanotube in flame synthesis based on semi-empirical approach, Carbon Letters, 31 (1). pp. 1-10. https://doi.org/10.1007/s42823-020-00127-z 12. Abu Bakar Kazeem, Nur Azam Badarulzaman, Wan Fahmin Faiz Wan Ali, Relating fractographic analysis to yield strength of novel x7475 (Al-Zn-Mg-Cu) alloys produced by recycling aluminium beverage cans, Materials Letter, 262, (2019) pg. 1-11, Q2 https://doi.org/10.1016/j.matlet.2019.127067 13. Musfirah Mohhtar, Wan Fahmin Faiz Wan Ali, Joy Rizki Pangetsu Djuanshah, Influence of silica content on the stabilization of tetragonal zirconia for biomedical applications, AIP Conf. Proceed. Vol. 2068, (2019) pg. 0201101-0201106, https://doi.org/10.1063/1.5089409 14. Abubakar Kazeem, Amkpa Job Ajala, Mohammed H. Rady, Nur Azam Badarulzaman, Wan Fahmin Faiz Wan Ali, Correlating conductivity with hardness and density in x7475 alloys for development of linear hardness model, Universal Journal of Mechanical Engineering, 7(6C), (2019) pg. 15-21, https://10.13189/ujme.2019.071603 15. Abubakar Kazeem, Amkpa Job Ajala, Mohammed H. Rady, Nur Azam Badarulzaman, Wan Fahmin Faiz Wan Ali, Preliminary morpho-mechanical investigation of x7475 al-alloys produced from recycled beverage can, Universal Journal of Mechanical Engineering, 7(6C), (2019) pg 7-14, 16. Abu Bakar Kazeem, Nur Azam Badarulzaman, Wan Fahmin Faiz Wan Ali, Effect of Isothermal Heat treatment on Hardness of X7475 Aluminium Alloys, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55(2), (2019) pg. 233-239. http://www.akademiabaru.com/doc/ARFMTSV55_N2_P233_239.pdf 17. Muhammad Faiz Ashri, Nik Akmal Rejab, Zainal Arifin Ahmad, Norazharuddin Shah Abdullah, Nur Azam BadarulZaman, Raja Azlan Amirul Raja Mat, Wan Fahmin Faiz Wan Ali, Densification and Grain Growth of Microwave-Sintered Yttrium Iron Garnet, AIP Conf. Proceed. Vol. 2068, pg. 0201071-0201078, (2019) https://doi.org/10.1063/1.5089406 18. Yap Tek Hong, Mohd Hasbullah Idris, Wan Fahmin Faiz Wan Ali, Mohammed Rafiq Abdul Kadir, Evaluation of as cast aluminium alloy tubes fabricated by using horizontal true centrifugal casting techniques, AIP Conf. Proceed. Vol. 2068 (2019), pg. 0201081-0201087, https://doi.org/10.1063/1.5089407 19. Hisyamuddin Hanif Ahmad, Nik Akmal Rejab, Zainal Arifin Ahmad, Mohd Fadzil Ain, Mohammadariff Othman, Wan Fahmin Faiz Wan Ali, Effect of Sm on YIG: Structural and Dielectric Properties Evaluation, AIP Conf. Proceed. Vol. 2068, (2019) pg. 0201121-0201126, https://doi.org/10.1063/1.5089411 20. Mohamadariff Othman, Wan Fahmin Faiz Wan Ali, Mohd Fadzil Ain, Zainal Arifin Ahmad, Wan Amirul Wan Mohd Mahiyiddin, Yazeed Qasaymeh, Study on modified curve fitting model in analyzing YIG resonator antenna. Microwave and Optical Technology Letters. Vol 59 (12). (2018) pg. 1-6. DOI:10.1002/mop.31570 21. Wan Fahmin Faiz Wan Ali, Maslinda Kamarudin, Norazharuddin Shah Abdullah, Zainal Arifin Ahmad, Investigation of YIG’s Active Site Using Density Functional Theory, Materials Science Forum, Vol. 888 (2017), pg. 76-80. 22. Rosyaini Afindi Zaman, Mohamad Johari Abu, Mohd Fariz Ab Rahman, Wan Fahmin Faiz Wan Ali, Julie Juliewatty Mohamed, Mohd Fadzil Ain, Zainal Arifin Ahmad, Dielectric Properties of Al2O3/CaCu3Ti4O12 Composite at High Frequency Range, Materials Science Forum, Vol. 888 (2017), pg. 7-11, http://www.ttp.net/978-3-0357-1029-8/toc.html 23. Rosyaini Afindi Zaman, Wan Fahmin Faiz Wan Ali, Mohamad Johari Abu, Julie Juliewatty Mohamed, Mohd Fadzil Ain, Zainal Arifin Ahmad, Role of mixing mediums in the synthesis of single phase CaCu3Ti4O12 (CCTO), Journal of Ceramic Processing Research, (2016), Vol. 17, Pg. 626-631, http://jcpr.kbs-lab.co.kr/file/JCPR_vol.17_2016/JCPR17-6/20.2015-220_626-631.pdf 24. Wan Fahmin Faiz Wan Ali, Norazharuddin Shah Abdullah, Maslinda Kamarudin, Mohd Fadzil Ain, Zainal Arifin Ahmad, Sintering and Grain Growth Control of High Dense YIG, Ceramic International, (2016), Pg. 1-20, http://dx.doi.org/10.1016/j.ceramint.2016.06.004 25. Nik Akmar Rejab, Zhwan Dilshad Ibrahim Sktani, Tan Yong Dar, Wan Fahmin Faiz Wan Ali, Abdul Rashid Jamaludin, Zainal Arifin Ahmad,The capability of hibonite elongated grains to influence physical, microstructural, and mechanical properties of zirconia toughened alumina–CeO2–MgO ceramics, International Journal of Refractory Metals and Hard Materials, (2016), Vol. 58, Pg 104–109, http://dx.doi.org/10.1016/j.ijrmhm.2016.04.008 26. Wan Fahmin Faiz Wan Ali, Norazharuddin Shah Abdullah, Mohd Fadzil Ain and Zainal Arifin Ahmad, Phase Evolution of Yttrium Iron Garnet (YIG) Made By Solid State Sintering: Particle Size Effect, Materials Science Forum, (2016), Pages 276-280, doi:10.4028/www.scientific.net/MSF.840.276 27. Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, Zainal Arifin Ahmad, The Investigation of the Phenomenological YIG Phase Formation Within 1000°C to 1250°C: A Kinetic Approach, Journal of the American Ceramic Society, (2015), Pages 1-9 (doi: 10.1111/jace.13865). 28. Ubaid Ullah, Wan Fahmin Faiz Wan Ali, Mohd Fadzil Ain, Nor Muzlifah Mahyuddin, Zainal Arifin Ahmad, Design of a Novel Dielectric Resonator Antenna using MgTiO3–CoTiO3 for Wideband Applications, Materials & Design, (2015) vol. 85, Pages 396-403 29. Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, Zainal Arifin Ahmad, From Optimization to Dielectric Resonator Antenna (DRA) Application of YIG: Synthesis Approach. Journal of Alloys and Compounds, (2015) Vol. 645, Pages 541–552 (doi:10.1016/j.jallcom.2015.05.092) 30. Wan Fahmin Faiz Wan Ali, Hasnul Hakimi Jaafar, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, Zainal Arifin Ahmad, Enhancement of YIG Bandwidth Efficiency through Ce-Doping for Dielectric Resonator Antenna (DRA) Applications, Journal of Materials Science: Materials in Electronics (2015) (DOI:10.1007/s10854-014-2428-7) 31. Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, Zainal Arifin Ahmad, The Behavior of High Frequency Tunable Dielectric Resonator Antenna (DRA) with Addition of Excess Fe2O3 in Y3Fe5O12 (YIG) Formulation, Journal of Materials Science: Materials in Electronics, (2013), pg.1-13 (DOI 10.1007/s10854-013-1624-1) 32. Wan Fahmin Faiz Wan Ali, Hasnul Hakimi Jaafar, Mohamadariff Othman, Mohd Ihsan Zubir, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, Zainal Arifin Ahmad. Structural Properties of Cerium Substituted Yttrium Iron Garnet. Advanced Materials Research, Vol. 187 (2015) pg. 157-161. doi:10.4028/www.scientific.net/AMR.1087.157 33. Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Nik Akmar Rejab, Mohd Zaid Abdullah, Arjuna Marzuki, Sabar Derita Hutagalung, Julie Juliewatty Mohamed, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, and Zainal Arifin Ahmad, Synthesis and Characterization of Ba0.3Sr0.7ZrO3 Ceramic Thick Films Prepared By Sol-Gel Technique, Advanced Materials Research, Vol. 620 (2013) pg. 435-439. 34. Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Nik Akmar Rejab, Mohd Zaid Abdullah, Arjuna Marzuki, Sabar Derita Hutagalung, Julie Juliewatty Mohamed, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, and Zainal Arifin Ahmad, Synthesis and Characterization of Ba0.3Sr0.7ZrO3 Ceramic Thick Films Prepared By Sol-Gel Technique, Advanced Materials Research, Vol. 620 (2013) pg. 435-439. (doi:10.4028/www.scientific.net/AMR.620.435) 35. Wan Fahmin Faiz Wan Ali, Mohamadariff Othman, Mohd Fadzil Ain, Norazharuddin Shah Abdullah, Zainal Arifin Ahmad, Studies on the Formation of Yttrium Iron Garnet (YIG) through Stoichiometry Modification Prepared by Conventional Solid-State Method, Journal of the European Ceramic Society, (2013), Vol. 33, pg. 1317-1324. (http://dx.doi.org/10.1016/j.jeurceramsoc.2012.12.016) 36. Wan Fahmin Faiz Wan Ali, Nik Akmar Rejab, Mohamadariff Othman, Mohd Fadzil Ain, Zainal Arifin Ahmad, An Investigation of Dielectric Resonator Antenna Produced from Silicon (100) Enhanced by Strontium Doped-Barium Zirconate Films. Journal of Sol-gel Science and Technology, (2012) Vol. 61, pg. 411-420. (DOI 10.1007/s10971-011-2641-2) 37. Nik Akmar Rejab, Mohamadariff Othman Wan Fahmin Faiz Wan Ali, Mohd Fadzil Ain, Zainal Arifin Ahmad, (Ba0.93Nd0.07)TiO3 Thin Films Prepared by Sol-Gel Method as a Potential Dielectric Resonator Antenna, Journal of Sol-gel Science and Technology, (2011) Vol. 57 pg. 172-177. (DOI 10.1007/s10971-010-2338-y |
Academic Recognition and Leadership
September 16, 2017 by Leave a Comment
Academic Recognition and Leadership
| No | Academic Recognition | Year | Level | Awarding body / name of institution |
| 1 | Internal Examiner for Master (Mixmode) Presentation | 2016 | University | Faculty of Mechanical Engineering, Universiti Teknologi Malaysia (UTM) |
| 2 | Internal Examiner Final Year Project | 2016 | University | Faculty of Mechanical Engineering, Universiti Teknologi Malaysia (UTM) |
| 3 | Reviewer | 2016 | International | 6th International Graduate Conference on Engineering, Science and Humanity (IGCESH’2016) |
| 4 | Reviewer
|
2016 | International | International Conference on Education (ICOED’2016) |
| 5 | Reviewer | 2016 | International | International Conference on Computer and Communication Engineering (ICOCOE’2016) |
| 6 | Reviewer
|
2016 | International | Advanced Research in Material Sciences, Manufacturing, Mechanical and Mechatronic Engineering Technology International Conference (AR4MET’2015-16) |
| 7 | Reviewer
|
2016 | International | International Conference on Computer and Communication Engineering (ICOCOE’2016) |
| 8 | Referred Journal Reviewer | 2016 | International | International Journal of Electromagnetic Technology (IJET), 2016 |
| 9 | Reviewer | 2015 | International | Seminar on Advanced Materials Characterization Techniques in Research, Industry, and Nuclear Applications (AMCT 2015). |
Awards
September 16, 2017 by Leave a Comment
Awards
| Year | Honours and Awards | |||||
| 2020 | Silver-22nd Industrial Art and Technology Exhibition (INATEX) 2020 Excellent Service Awards (UTM-Citra Karisma) |
|||||
| 2019 | Best Paper Award in 5th ICMER’19 Excellent Service Awards (Faculty of Engineering) |
|||||
| 2018-2020 | UTM Award of Excellence 2019 “Active Blended Learning Course” | |||||
| 2018 | Best Poster Presenter in ICXRI’18 | |||||
| 2017 | UTM Award of Excellence 2017 “Active Blended Learning Course” | |||||
| 2011, 2013, 2015, 2016 | USM – Sanggar Sanjung Award (Top 15% Journal – Category Publication) |
|||||
| 2012 | Golden Key International Honour Society Award (Being top 15% in USM) | |||||
| 2011 | Best student of USM Materials Engineering (Master of Science – Mix mode Program) |
|||||
| 2008, 2010 | Dean’s List, School of Materials and Mineral Resources Engineering, USM | |||||
| 2007 – 2009 | Commandant List (USM Reserve Officer Training Unit-ROTU) | |||||
Current Projects
September 16, 2017 by Leave a Comment
Research Projects
| No | Title | Role | Source / Amount | Year | Status |
| 1 | The kinetic of Zn-Al-Mg coating growth on alloy steel for offshore mooring and crane rope facilities | Project Leader |
RM 40,000.00 |
2017 – 2019 | In progress |
| 2 | Surface cleaning and ceramic coating process using gas tunnel type plasma spraying | Member |
RM 40,000.00 |
2017 – 2019 | In progress |
| 3 | Low-temperature synthesis of graphene from liquid benzene by chemical vapor deposition method. | Member |
RM 40,000.00 |
2017 – 2019 | In progress |
| 4 | Thermal cyclic behaviors of lanthanum zirconate based double ceramic layer thermal barrier coating on Inconel 625 for gas turbine engine application | Member |
RM 17,940.00 |
2017 – 2019 | In progress |
| 5 | Thermodynamically and Kinetic Study of Solid State Reaction in Yttrium Iron Garnet System | Project Leader |
RM 20,000.00 |
2016 – 2017 | In progress |
| 6 | Yttrium Irion Garnet (YIG) as Magnetically Tunable Materials for Tunable Resonator | Project Leader |
RM 7,725.00 |
2012 – 2015 |
Completed |
Research Areas/Interest
September 16, 2017 by Leave a Comment
Research Areas/Interest
Research Interest || Solid State Reaction || Reaction Kinetics || Dielectric Resonator Antenna || Dielectric Materials || Density Functional Theory || Galvanizing || Coating || Design of Experiment || Advanced Materials || Ceramics Materials || Materials Characterization || Hard Materials || Failure Analysis || Structural Integrity ||
“Knowledge is that which benefits not that which is memorized”
Service to the University
September 16, 2017 by Leave a Comment
| No | Position / membership | Committee | Duration |
| 1 | Institute Materials Malaysia Student Chapter (IMM-UTM) | Advisor | 2017-2019 |
| 2 | Coordinator for casting lab | Coordinator | 2017-2019 |
| 3 | Secretariat Member in Seminar on Advanced Materials Characterization Techniques in Research, Industry and Nuclear Applications (AMCT 2017), Awana Golf Resort, Genting Highlands, Pahang. | Technical, website and publicity | 2017 |
| 4 | Secretary in 3rd Workshop on Sample Preparation and microstructural analysis | Secretary | 2016 |
| 6 | Member in Materials Research Consultancy Group of Frontier Materials | Research Member | 2016 |
| 7 | Secretariat Member in MoU Signing Ceremony between UTM – IMM | Secretariat | 2016 |
| 8 | Coordinator Final year project (Mechanical Materials) | Coordinator | 2016-2018 |
| 9 | Committee member (Task Force for Interim Audit (Engineering Accreditation Council, EAC) for Mechanical-Materials Program | Committee Member | 2016 |
| 10 | Secretariat Member in Seminar on Advanced Materials Characterization Techniques in Research, Industry and Nuclear Applications (AMCT 2015), Palace of the Golden Horses, Seri Kembangan, Selangor | Technical, website and publicity | 2015 |
| 11 | Laboratory Demonstrator for 1st Year Student on Phase Identification using Hanawalt, Fink and Alphabetical Method (X-ray Diffraction Laboratory), School of Materials and Mineral Resources Engineering-USM (2015) | Demonstrator | 2015 |
| 12 | Sudoku Competition (Piala Professor Dr. Hj. Zainal Arifin Hj. Ahmad), at School of Materials & Mineral Resources Engineering, USM-Engineering Campus, Penang | Project Manager | 2014-2015 |
| 13 | KPI Committee Member in School of Materials & Mineral Resources Engineering, USM-Engineering Campus, Penang. | Committee Member | 2014 |
| 14 | Demonstrator for a group student from MRSM Transkerian’s assisting them in samples preparation for Tunas Saintis Exhibition. Penang. | Demonstrator | 2014 |
| 15 | Laboratory Assistance for Mara Junior Science College Transkrian’s student-Assisting them for Pesta Type III Competition on “Rice husk-rubber composite for microwave absorber” (Physical Laboratory) – School of Materials and Mineral Resources Engineering-USM. (2014) | Demonstrator | 2014 |
| 16 | Industrial Training Poster Judge at School of Materials and Mineral Resources Engineering-USM (2013) | Judge | 2013 |
| 17 | Laboratory Demonstrator for 3rd Year Student on Microstructure and Hardness Testing (Metallography Laboratory), School of Materials and Mineral Resources Engineering-USM (2013) | Demonstrator | 2013 |
| 18 | Committee Member in Asian International Conference on Materials, Minerals, and Polymers (MAMIP2012). Vistana Hotel, Penang | Committee Member | 2012 |
| 19 | Technical Assistant in International Conference on X-rays and Related Techniques in industry and research (ICXRI2012). Vistana Hotel, Penang | Technical Assistant | 2012
|
| 20 | Tutor for 1st Year Student on Materials Engineering subject at School of Materials and Mineral Resources Engineering-USM (2012) | Tutor | 2012 |
| 21 | Committee Member for the assessment of School of Materials and Mineral Resources Engineering-USM’s Key Performance Index (KPI), (2011-2015 | Committee Member | 2011-2015 |
Academic Advisor
September 16, 2017 by Leave a Comment
Introduction
What is academic advising?
Academic advising is a partnership between the academic advisor and advisee throughout
the period a student spends completing a programme of study at the university.
Academic advising is a process in which academic advisors assist advisees develop both
their academic and personal potentials. It encompasses the development and delivery of
accurate, up-to-date information regarding educational programmes, courses, resources,
policies, procedures, and career options to aid students in pursuing their academic and
career goals.
Academic advising also assists students to realise the maximum educational benefits
available to them by helping them to better understand themselves and to learn to use
resources of the institutions to meet their educational needs (Crockett,1984)*.
Objectives of Academic Advising
- To assist students in understanding institutional policies, procedures and regulations.
- To provide information on academic programmes, institutional support services and
resources. - To assist students in planning, monitoring and evaluating their educational plans
towards degree completion and developing decision-making skills. - To assist students in determining their career goals.
- To assist students in developing their intellectual, personal, and social development.
Role of Advisees
All students, first to final year, are to meet their academic advisors for assistance in drawing
up their plan of study. In general students must:
1. discuss with their advisors the courses to take for each semester
2. register for all the relevant courses (core and elective) with the right code
3. ensure that the total number of credits taken is correct i.e. a maximum of 18 credits per semester.
4. Students on Probation Status are only allowed to register for 12 credits
5. attend the First Year Experience (FYE) programmes organised by the faculty
6. attend the e-Portfolio Workshop organized by the faculty
Students will seek their Academic Advisor for
Course Withdrawal [TD]
(a) A student with the approval of his/her Lecturer and Academic Advisor can withdraw from any of his/her registered course in the semester no later than the last working day of week NINE (9) of the semester.
(b) Approval for withdrawing from a course is subject to the required Minimum Credits EXCEPT with the Dean’s permission .
(c) Withdrawal (TD) status will be recorded in the course registration and transcript.
COURSE REGISTRATION
(a) A student with the approval of his Academic Advisor and the faculty offering the Minor can register for any of the offered courses. as specified for the Minor.
(b) A student must register for a course according to the rules and procedures within the time specified by the respective faculties. Students are not allowed to register for courses with HS status for Minor.
Course Registration is done online or using the Course Registration Form (UTM.E/3.1 Amendment 2010). Students are advised to discuss with their Academic Advisors before registering for the courses.
APPLICATION GUIDELINES FOR THE AWARD OF A DEGREE
Application must be made using the Award of a Degree Application Form (Form UTM.E/7.7 Amendments 2010) (3 copies) within the time as stipulated by the University. Students must submit the three (3) copies to the Faculty for endorsement. The first copy will be given to the Faculty office, the second copy to the Academic Advisor and the last copy to be kept by the student. Failure to submit the first copy to the Faculty office is considered as non submission of the graduation application form.
The abovementioned item can also be downloaded at [utm academic advising] and [academic guideline]
Teaching and Supervision
September 16, 2017 by Leave a Comment
1.0. TEACHING AND SUPERVISION
|
