SPECIAL INVITATION FOR STEAM SYSTEM RELIABILITY IMPROVEMENT & TROUBLESHOOTING

Inline image 1

[SPECIAL COURSE]

STEAM SYSTEM RELIABILITY IMPROVEMENT& TROUBLESHOOTING
19 SEPTEMBER 2017, UTM KUALA LUMPUR
 
INTRODUCTION
Energy system’s reliability improvement and cost optimization are very essential needs to all industries towards sustaining their profitability and to succeed in the competitive environment. This training course is developed with specific focus on steam systems reliability and efficiency improvement, which will benefit engineers who operate & maintain industrial steam systems.
 
COURSE OBJECTIVE
To train Plant Engineers and Engineering Service providers in carrying out steam system cost optimization assessments.
To help industry achieve energy cost reduction through:
• Proper operation and controls
• System maintenance
• Appropriate process uses of steam
• Cogeneration and
• Application of state-of-the-art technologies
COURSE OUTCOME
Participants are exposed to the cost optimization opportunities that are successfully implemented in steam systems elsewhere and some of the software tools that are extensively utilized by steam system engineers and Engineering service providers.
 
Who should attend?
Plant Engineers (who are associated with steam systems operations, maintenance, design) service providers, Steam system consultants, Energy Managers (REEMs), Professional Engineers, Senior academicians and ESCOs
 
TOPIC COVERED
• Introduction of Presentation & Participant.
• Steam Generation & Use in Various Manufacturing Process
• Utility Costs-Power, Fuel & Water
• Boiler Losses – Shell Losses, Blowdown Losses, Stack Losses
• Steam Distribution. Steam Users & Condensate Return System
• Steam Turbines-Backpressure & Condensing types.
• Boiler Combustion Related Issues
• Deaerators, PRVs, Blowdown & Flash Steam
• Heat Recovery Components (Economizers & Air Pre-Heaters)
• Issues related to Water Hammer & Backpressure in condensate recovery
• Issues related to Steam Traps & uninsulated hot-surfaces: 3E Plus
• Issues related to Steam Turbine operation & System Balancing
• Steam System Models Developed by SSAT & SSMT
 
REGISTRATION FEES
RM1899 per pax Normal price
RM1799 per pax for group of 3 
RM1749 per pax Early birds**

**extended until 8 September 2017

 

Special Rate for University staff,
RM 1899 for 2 pax
 
 
 
FOR REGISTRATION, PLEASE CLICK HERE
 
PAYMENT METHOD
Bank Draft/Local order/Cheque/Transfer
Crosssed and made payable to:
ISI Ventures Sdn Bhd
1001 9001 0208
Affin Bank Berhad
 
 
CONTACT US
ISI Ventures Sdn. Bhd.
Ground Floor, Block J1, UTM Kuala Lumpur, 
Jalan Sultan Yahya Petra, 
54100 Kuala Lumpur 
Tel: (+603) 2615 4713/4454 (Mr Ridhwan / Ms. Mahanim) 

UTM, Asia Top 10 Young University

 

Unsurprisingly for a continent of its size, Asia has a large number of universities to choose from, with a significant number included in the QS World University Rankings® 2018. While many prestigious Asian universities date back to the 19th or early 20th century (if not before), the region is also home to many fast-rising young institutions.

In fact, Asia boasts six uninterrupted places at the top of the QS Top 50 Under 50 2018, which showcases the world’s top universities under 50 years old.

A total of 21 young universities in Asia are included in the Top 50 Under 50, more than any other region. This includes universities from across the continent, in both the far east and the far west of Asia, including countries such as Israel, the United Arab Emirates and Qatar. Out of all the Asian countries featured, Hong Kong and Malaysia each have the most entries (four each), with all but one of Hong Kong’s representatives appearing in the top 10.

UTM is ranked at number 10 in the list of top 10 young universities in Asia in 2018, 21st in the Top 50 Under 50 and 253rd in the world this year. A research-intensive university, UTM was established in 1972 and specialises in engineering, science and technology. It is located in Kuala Lumpur and Johor Bahru and aims to be a world-class centre of academia and technological excellence.

Source: QS World University Rankings

MEMPERTAHANKAN SEBUAH KEMERDEKAAN

Syarahan Umum Prof. Dr. Ir. Muhammad Nuh

 

Tarikh              :   7 September 2017 (Khamis)
Masa                 :   10.30 pagi
Tempat        :   Dewan Senat, Bangunan Canseleri Sultan Ibrahim, UTM Johor Bahru
Penceramah  :   Prof. Dr. Ir. Muhammad Nuh, Mantan Menteri Pendidikan Nasional Indonesia

86th Professorial Inaugural Lecture Series by Professor Dr. Sobri Harun

CFP: (LOW FEES) 2017 ​INTERNATIONAL RESEARCH ​SYMPOSIUM SERIES (IRSS)

Please visit the Website: www.irss2017.com

COATING FINGERPRINT FOUNDATION COURSE

No automatic alt text available.

 

OPEN REGISTRATION
COATING FINGERPRINT FOUNDATION COURSE
Open to anyone interested in the topic & its application including graduates in (Bachelor Degree/Master/Ph.D level), researchers, chemists, engineers, physicist, technicians from academic/industry & Managers
Details course here >> https://drive.google.com/open… <<
Register your name, telephone number & email address to azlizul@mte.com.my.. 
Call us at 03-8060 0166
Check on our website at www.mte.com.my

Town Hall Session UTM Global Plan (Phase III : 2018 – 2020)

PUBLIC LECTURE BY PROF. RICARDO MARTINEZ-BOTAS, IMPERIAL COLLEGE LONDON

PUBLIC LECTURE BY PROF. RICARDO MARTINEZ-BOTAS, IMPERIAL COLLEGE LONDON

Inline image 4

Invitation to Workshop on High Resolution

Invitation to Workshop on
High Resolution Low KV
Transmission Electron Microscope V2
(HITACHI HT 7700 EXALENS TEM)
19-20 September 2017
Microscopy & Imaging Laboratory
University Industry Research Laboratory (UIRL)

Dear All,

We are happy to invite you and your colleagues to participate in a two-day workshop on High Resolution Low KV Transmission Electron Microscope V2, to be held on 19th to 20th of September 2017 at Blok T03, UIRL, Universiti Teknologi Malaysia, Johor Bahru Campus.

In almost all fields of modern science and technology the demands on high resolution imaging on delicate nanomaterials are becoming ever more challenging. The answer to these challenges is a low voltage high resolution 120kV Transmission Electron Microscope with the new HR objective lens that minimizes spherical aberration coefficient and Dual Objective lens for both High Contrast/High Resolution imaging

The main topics covered in these course will
1) Basic Theory of TEM
2) TEM design and its imaging capabilities
3) Analytical attachments
4) Demonstration of the HR 120kV TEM and sample discussions

Therefore, this workshop is COMPULSORY for those who want to run analysis using TEM at UIRL.

For more details about the workshop can be found in the brochure as attached.

We are looking forward for your participation! Thank you.
Thank You/Terima Kasih.

“Berkhidmat Untuk Negara kerana Allah”

Unit Pengurusan Makmal Universiti
T03,University Industry Research Laboratory
Universiti Teknologi Malaysia
81310 Johor Bahru
Office: 07-5610263 EXT:10263
Email: pmu@utm.my
Website:http://www.utm.my/upmu/

Post-doctoral fellow at UTM

Assalamualaikum and Selamat Sejahtera

Dear Researchers,

Please be informed that the application for post-doctoral fellow is now opened until 20 September 2017.Complete hard copy application form must be submitted to RMC office before 04.00 pm on 20 September 2017 (Wednesday).

Kindly refer to the Post-Doctoral Fellow guideline and checklist at RMC portal at http://rmc.utm.my  (download – research activity – appointment of post-doctoral).

For further inquiries, applicant may directly contact post-doctoral fellow secretariat atrmc.postdoc@utm.my

Applicant who does not received any feedback after three (3) months from the application submission date, is considered as unsuccessful application.

Thank you.

“Membangun Sinergi Generasi Milenial antara Indonesia-Malaysia”

Inline image 1

JEMPUTAN MENGHADIRI PROGRAM SYARAHAN UMUM OLEH YBHG PROFESOR DR. IR. MUHAMMAD NUH, MANTAN MENTERI PENDIDIKAN NASIONAL INDONESIA & PENERIMA IJAZAH KEHORMAT DOKTOR PENGURUSAN PENDIDIKAN UTM TAHUN 2011

 Dengan segala hormatnya merujuk kepada perkara di atas.

2.       Sukacita dimaklumkan bahawa Pejabat Timbalan Naib Canselor (Akademik & Antarabangsa) dan Centre for Sustainable Nanomaterial (CSNano), Ibnu Sina Institute for Scientific and Industrial Research (ISISIR) dengan berbesar hati menjemput YBhg. Datuk’/Dato’/Datin/Prof./Dr./Saudara menghadiri seperti maklumat berikut:-

Tarikh              :   7 September 2017 (Khamis)

Masa                 :   10.30 pagi

Tempat        :   Dewan Senat, Bangunan Canseleri Sultan Ibrahim, UTM Johor Bahru

Penceramah  :   Prof. Dr. Ir. Muhammad Nuh, Mantan Menteri Pendidikan Nasional Indonesia

Tajuk                :   “Membangun Sinergi Generasi Milenial antara Indonesia-Malaysia”

Sehubungan dengan itu, semua staf dijemput hadir. Kehadiran saudara akan diambilkira sebagai mata CPD di UTMSmile.

Kerjasama Saudara amatlah dihargai.

Terima kasih.

UTM Second Year B Sc Architecture Student Wins Malaysian Wood Award 1st Prize at the Malaysian Timber Council Silver Jubilee

Muhammad Aizat bin Anuar 2 SBEA, won the first prize in the Malaysian Wood Awards Student Building Category of the prestigious Malaysian Timber Council Silver Jubilee Celebrations held at the Shangri-la Hotel Kuala Lumpur on 26 July 2017. The top award carries with it a Cash Prize of RM2,500.00 and a trophy, and was presented by Dato’ Gooi Hoe Chin, Chairman of the Malaysian Timber Council and witnessed by YB Datuk Sri Mah Siew Keong, Minister of Planttion Industries and Commodities. The Design that won the prize was for a “Cookies” Community Centre, A second Year Design Project Supervised by Dr. Abdul Halim bin Hussein of the Department of Architecture.

LAUNCHING OF JOINT MASTER DEGREE PROGRAMME (JMDP)

Kuala Lumpur, 29 August 2017: Universiti Teknologi Malaysia (UTM) held the launching of the Joint Master Degree Programme (JMDP) between University of Tsukuba, Japan and MJIIT, UTM & JASTIP Joint-Laboratory of Disaster Preparedness and Prevention Centre (DPPC), MJIIT, UTM. YBhg. Prof. Dr. Noor Azizi Bin Ismail, Deputy Director General Of Higher Education (Public Higher Education Institutions), Ministry of Higher Education was invited to officiate this event.

 

The Joint Master Degree Programme (JMDP), a joint collaboration between Environmental Engineering & Green Technology Department of MJIIT, UTM and School of Life and Environmental Sciences of University of Tsukuba, Japan through the Master’s program called Masters of Sustainability and Environmental Sciences, which is an interdisciplinary study that stresses on the application of concepts and methods from the physical, chemical and biological study of the environment. Upon completion of the program graduates will receive a single testamur (certificate) conferred jointly by both Universiti Teknologi Malaysia and University of Tsukuba.

 

The JASTIP Joint-Laboratory of Disaster Preparedness and Prevention Centre (DPPC), MJIIT, UTM was established as Disaster Prevention Satellite Site under Disaster Prevention Project, while another two project involved are Energy and Environment, established at the National Science and Technology Development Agency (NSTDA) in Pathum Thani, Thailand and Bioresources and Biodiversity Project established at the Indonesian Institute of Sciences (LIPI), Indonesia which these joint researches have engendered a number of researchers in leading positions and have helped train the researchers who have become subsequent leaders in the field. The launching of program will be presented by YBhg. Prof. Datin Dr. Rubiyah Yusof, Dean of MJIIT and Prof. Dato’ Ir. Dr Wahid Bin Omar, Vice-Chancellor UTM. Both launchings of the Joint Master Degree Programme (JMDP) and JASTIP Joint-Laboratory of Disaster Preparedness and Prevention Centre (DPPC), MJIIT were announced by YBhg. Prof. Dr. Noor Azizi Bin Ismail, Deputy Director General Of Higher Education (Public Higher Education Institutions), Ministry of Higher Education, represented by Prof. Dr. Kyosuke Nagata, President of University of Tsukuba, Japan and Prof. Dr. Kaoru Takara, Dean of Graduate School of Advanced Integrated Studies in Human Survivability, Kyoto University.

JOURNAL REVIEW” PUBLISHING WORKSHOP


Task Force Jurnal Penerbitan of UTM Razak School conducted a “Journal Review” Publishing Workshop on July 19, 2017 (Wednesday) at Razak Tower for its academic staff and postgraduate students.
This workshop, which consists of knowledge-sharing session and practical training session, would enable staff and students to produce quality “review” articles for publications in high-impact journals. The workshop was conducted by Dr. Firdaus Muhammad-Sukki, a lecturer from Robert Gordon University, UK.
At the end of this workshop, it is hoped that quality review articles will be produced by lecturers and students, hence assisting Razak School in achieving the KPI publication based on e-LPPT and MyRA II.

Biodata of Dr Firdaus Muhammad-Sukki
Dr Firdaus Muhammad-Sukki received his MEng degree in Electrical and Electronic Engineering from Imperial College, London in 2006 under the Yayasan TM scholarship. In 2009, he received studentship awards from Glasgow Caledonian University (GCU), Scottish Funding Council (SFC) and Yayasan TM to pursue his postgraduate study in Glasgow Caledonian University from which he obtained his PhD in 2013. Dr. Firdaus Muhammad Sukki is a member of the Institution of Engineering and Technology (IET) and an associate of the City and Guilds, London (ACGI). Dr. Firdaus Muhammad Sukki has been an active researcher and is currently a Lecturer in Robert Gordon University, United Kingdom. His research interest is in solar energy, particularly in terms of designing optical solar concentrators to create a low cost solar photovoltaic system. On top of that, he also carried out a number of non-technical research including market trend and financial analysis related to renewable technologies for countries such as Malaysia, Japan, Nigeria, Cameroon and United Kingdom. He has excellent track record in collaborating with research universities in around the globe. He has published numerous articles in high impact factor journals (e.g. Nature, Renewable & Sustainable Energy Reviews, Applied Energy, Energy, Renewable Energy, Energy Policy etc.). He has produced 16 review paper in high impact journals. As an academic author, to date, he has an h-index of 13 and i-index of 17, with a cumulative citation of 502. He is also actively presenting in various conferences related to his area. Prior to joining the academia, he was a communication engineer in Malaysia’s largest telecommunication company. He was in charge of the leased line servers for Malaysia’s network and was involved in major projects related to the telecommunication while holding the post.

International Medical Device & Technology Conference (iMEDiTEC2017)

 

MEDITEC 2017 will be held at Universiti Teknologi Malaysia, 6-7 September 2017.
It will exhibit an exciting technical programme, complete with 22 tracks highlighting recent progress and inventions in all major areas of medical devices and their related technologies. iMEDITEC 2017 will also feature high-quality one-day workshop on 5th September, Industry Panels and Exhibition, as well as keynotes from prominent research and industry leaders.
In conjunction to this conference, a general assembly meeting will be held to setup an International Medical Device Society (IMEDS) which will be held on 7th September 2017.

Apa sebenarnya berlaku di sana ; Isu Palestin dan Masjid Al-Aqsa

HEBAHAN JADUAL TERKINI CAR FREE DAY UTM 2017

86th Professorial Inaugural Lecture Series by Professor Dr. Sobri bin Harun

Assalamualaikum w.b.t. & Salam Sejahtera,
Dear Datuk’/ Dato’ / Profesor / Dr. / Mr./ Mrs.,
All staff and students are cordially invited to the 86th Professorial Inaugural Lecture Series by Professor Dr. Sobri bin Harun from Faculty of Civil Engineering, UTM Johor Bahru on the respective date and time as below :-
Date     : 7 September 2017  (Thursday)
Time    : 9.00 am
Venue  : Smart Classroom, Block D02, Faculty of Civil Engineering, UTM Johor Bahru
Title     : Water Supply Reservoir Management and Climate Change

We appreciate your cooperation in making this event educational and enlightening for the whole University’s community. For UTM staff, your attendance will be recorded in UTMSmile system.Your presence in this event would be much appreciated.

Thank you

 

A 3 Day Course on Boiler and Steam Generation:Operation, Maintenance and Troubleshooting