4th International Conference on Water Resources
February 21, 2018 by Leave a Comment
Call for Papers
The 4th International Conference on Water Resources (ICWR 2018)
The organising committee of the 4th International Conference on Water Resources (ICWR 2018) are pleased to announce that the above mentioned conference will be held at Bayview Hotel, Langkawi from 27th to 28thof November 2018. The ICWR 2018 theme is “Water as Resources & for Livelihood”.
For more information:
https://seminar.utmspace.edu.my/icwr2018/
Please find enclosed herewith the ICWR 2018 Call for Paper Brochure
“We aim to bring together academicians, engineers, researchers, graduate students, professionals, government agencies, consultants, contractors, decision makers, policy makers, NGOs, individuals and organizations to share and exchange views and experiences on water resources. It is hoped that the conference would serve as one of the most prestigious event in the region to gather students, scholars, professionals and researchers in sharing and disseminating research findings in areas related to the aims and objectives of the conference. We therefore invite individuals and organizations to participate in the ICWR 2018.”
Thank you & best regards.
Department of Water and Environmental Engineering
Faculty of Civil Engineering
Universiti Teknologi Malaysia
Kahwin Muda
February 21, 2018 by Leave a Comment
Assalamualaikum w.b.t dan Salam Sejahtera
Saudara
Semua dijemput hadir ke sesi perkongsian ilmu bertajuk Kahwin Muda & Grade On Time yang akan disampaikan oleh Dr Zilal Binti Saari, CFiRST UTM pada ketetapan berikut:
Tarikh: 27 Februari 2018 (Selasa)
Masa: 2.30 Petang
Tempat: Bilik Seminar 3, Aras 4, Perpustakaan Sultanah Zanariah, UTM JB
Kehadiran semua amat dialu-alukan dan akan dicatatkan sebagai mata CPD di dalam UTMSmile.
Sekian, terima kasih
UTM Lestari
February 21, 2018 by Leave a Comment
Assalamualaikum, Salam Sejahtera dan Salam Lestari
Greetings,
Penutupan Jalan di Zon 1 (PHB, RMC, SPS, UTMLEAD, BPA, SRAD) adalah pada jam 6.00 pagi.Walaubagaimanapun, penutupan Zon 7 (Lingkaran Ilmu) adalah seperti biasa iaitu pada jam 8.00 pagi. Parking disediakan di Tasik Laman Menanti. Pendaftaran CPD hours bagi Program Taklimat Hijau di Foyer PHB.
Sekian, Kami Prihatin.
Regards, We Care.
7th iDECON
February 20, 2018 by 5 Comments
Dear All Respected Researchers, Academicians, Expertise, Engineer, Designer and Postgraduates Students,
CALL FOR PAPERS
7th International Conference on Design & Concurrent Engineering 2018 (7thiDECON)
7thiDECON : Industry 4.0 – Manufacturing Excellence and Sustainability
The 7thiDECON organized by Faculty of Manufacturing Engineering, Universiti Teknikal Malaysia Melaka (UTeM) will take place on:
17th – 18th September 2018
Riverside Majestic Hotel in Kuching, Sarawak, Malaysia
All accepted and registered papers will be published in SCOPUS INDEXED journals by Universiti Teknikal Malaysia Melaka (UTeM):
Journal of Advanced Manufacturing Technology
(JAMT) (ISSN: 1985-3157; e-ISSN: 2289-8107)
OR
Journal of Telecommunication, Electronic and Computer Engineering (JTEC) (ISSN: 2180-1843; e-ISSN: 2289-8131)
JAMT and JTEC are currently abstracted and indexed by Scopus, Index Copernicus International (ICV 2016: 70.57), Google Scholar, Genamics, Ulrich’s Periodicals, Worldcat, MYCite and MYJurnal.
Author are invited to submit original, unpublished papers on all aspects including but not limited to the following technical areas:
JAMT Theme and Scope: Industrial 4.0 in Manufacturing; Product Innovation; Green Design & Sustainability; Sustainable Materials & Design; Composite Product Design & Advanced Materials; Design for Environment and Sustainability; Design for Manufacturing & Assembly; CAD/CAM/CAE; Reliability in Design; Ergonomics in Design; Virtual Engineering; Concurrent Engineering; Rapid Prototyping; Reverse Engineering; Ergonomics in Design; Quality Engineering and Management; Manufacturing Process; Nanomaterials and Nanotechnology;Materials Science & Engineering; Design for Automation & Intelligent Systems; Design for Mechatronics Systems; Industrial Automation and Robotics; Features Based Technology;Emotion Engineering; Technology and Design; Automotive Engineering and Energy; Technology Management; Supply Chain Management; Logistics; Materials Handling; Warehousing;and Global Manufacturing Management.
Visit: http://journal.utem.edu.my/index.php/jamt/index for paper template and guidelines of JAMT. Manuscript should be no more than 12 pages in length inclusive tables, figures and illustrations.
|
Journal of Advanced Manufacturing Technology (JAMT) Journal of Advanced Manufacturing Technology ISSN: 1985-3157 e-ISSN: 2289-8107. Journal of Advanced Manufacturing Technology (JAMT) is a biannual peer reviewed … |
JTEC Theme and Scope: Telecommunications, Electronics and Computer Engineering; Software Engineering; Consumer Electronics; Electronic Design and Devices; Optoelectronics;Broadband and Multimedia System; Computer and Embedded System; Nano Materials Technology; and Energy Harvesting.
Visit: http://journal.utem.edu.my/index.php/jtec/index for paper template and guidelines of JTEC. Manuscript should be no more than 10 pages in length inclusive tables, figures and illustrations.
|
Journal of Telecommunication, Electronic and Computer … Journal of Telecommunication, Electronic and Computer Engineering (JTEC) ISSN: 2180-1843. eISSN: 2289-8131. JTEC is a peer-reviewed journal by Faculty of Electronic … |
7thiDECON is now accepting full manuscript submissions, EXCEPT for the review paper. Prospective authors are invited to submit their paper to EASY CHAIR:https://easychair.org/conferences/?conf=idecon2018
Important Dates & Conference Fees:
| 7thiDECON Important Dates | |
| Full Paper Submission | Dateline: 30th April 2018 |
| Notification of Acceptance | 30th June 2018 |
| Authors Registration Dateline | 31st July 2018 |
| Conference Day | 17th – 18th September 2018 |
| 7thiDECON Conference Fees* | Local and International Participant (in MYR) |
| Full Fees with Paper | 1500 |
| Second Paper Onwards** | 1300 |
| Audience / Participant without Paper | 1000 |
*The Conference fee includes conference receptions, lunches and snacks during the conference.
**For submission more than one (1) paper as the same presenting author.
Conference details for 7thiDECON can be reach at: https://idecon2018.utem.edu.my and please do not hesitate to email us at idecon@utem.edu.my for any further assistance and enquiries.
We welcomed your participation in 7thiDECON and see you all in Kuching, Sarawak. Where Adventure Lives!!!
Thank You & Best Wishes
7thiDECON Organizing Committee
# Kindly help us to disseminate this 7thiDECON CFP email to your colleagues, researchers and post-graduates students.
3rd North American IEOM Conference
February 19, 2018 by Leave a Comment
3rd North American IEOM Conference – Washington, DC
INDUSTRIAL ENGINEERING AND OPERATIONS MANAGEMENT
September 27-29, 2018, Washington, DC, USA
Venue: University of the District of Columbia (UDC) Campus
The IEOM Society International, a 501(c)(3) nonprofit organization, is organizing the 3rd North American International Conference on Industrial Engineering and Operations Management Conference (IEOM Washington DC) during September 27–29, 2018. The conference provides a forum for academics, researchers and practitioners to exchange ideas and recent developments in the field of industrial engineering, systems engineering, service engineering, manufacturing engineering, quality and reliability reengineering, operations research, engineering management, operations management and operations excellence. The event will advance theory and practice by fostering networking, collaboration and joint effort among the conference participants. The theme of the conference is “Achieving and Sustaining Excellence in Systems, Service and Operations”.
IEOM Society has become a premier international platform and forum for academics, researchers, scientists and practitioners to exchange ideas and provide insights into the latest developments and advancements in the fields of Industrial Engineering and Operations Management. IEOM has successfully organized international conferences in Dhaka (2010), Kuala Lumpur (2011), Istanbul (2012), Bali (2014), Dubai (2015), Orlando (2015), KL (2016), Detroit (2016), Rabat (2017), Bristol, UK (2017) and Bogota (2017). IEOM Washington DC event will be our 3rd North American Conference.
Authors can submit full paper(s) or abstract(s) only. IEOM Society encourages to submit full paper(s). All full papers will be subjected to double peer review. Accepted papers will be published in Proceedings and indexed in SCOPUS.
The conference will cover the following topics but not limited to:
- Artificial Intelligence
- Automation and Control
- Business Management
- Case Studies
- Construction Management
- Cyber Security
- Data Analytics
- Decision Sciences
- Defense
- Contracting
- Design and Analysis
- E-Business/E-Service
- E-Manufacturing
- Energy
- Engineering Education
- Engineering Management
- Entrepreneurship
- Environmental Services
- Financial Service Management
- Healthcare Operations and Services
- Human Factors and Ergonomics
- Industrial Services
- Industry Practices and Solutions
- Information Technology
- Innovation
- Inventory Management
- Lean
- Logistics
- Maintenance Services
- Manufacturing
- Modeling and Simulation
- Operations Management
- Operations Research
- Product Lifecycle Management (PML)
- Production Planning and Management
- Project Management
- Quality
- Reliability
- Service Systems and Management
- Six Sigma
- Supply Chain
- Sustainability
- Systems Dynamics
- Systems Engineering
- Technology Management
- Transportation and Traffic
Special Tracks:
- Global Engineering Education
- Industry Solutions
- Women in Industry and Academia
- Systems of Systems Engineering
Important Dates
- Paper submission deadline: April 15 2018
- Notification of acceptance: May 15, 2018
- Camera-ready submission deadline: June 1, 2018
- Registration deadline: July 1, 2017
- Conference: September 27-29, 2018
Student competitions are arranged. Award certificates will be given for 1st, 2nd & 3rd place winners.
- Undergraduate Student Paper Competition
- Graduate Student Paper Competition
- Doctoral Dissertation Competition
- Master Thesis Competition
- Undergraduate Research Competition
- High School and Middle School STEM Project Competition
- Sr. Capstone Design Project Poster Competition
- Simulation and PLM Design Competition
- Best Poster Competition
WORKSHOPS
- Lean Six Sigma
- Entrepreneurship
- Systems Simulation and Statistical Analysis
Conference Chairs:
Dr. Devdas Shetty
Dean, School of Engineering and Applied Sciences
University of the District of Columbia (UDC)
Washington, DC, USA
Dr. Ahad Ali
Associate Professor and Director of IE Programs
Lawrence Technological University
Southfield, Michigan, USA
Contact: info@ieomsociety.org
Conference website: www.ieomsociety.org/dc2018/
5 Tips for getting the most from full-text on ScienceDirect
February 19, 2018 by 1 Comment
 |
ScienceDirect is accessible through the search box on your library’s homepage or by a general search engine keyword query. Take these steps to get the most from the journals and books you read on ScienceDirect:
|
MyTREEvolution
February 16, 2018 by 3 Comments
I’M VOLUNTEER? YES! APPLY NOW! Are you an outgoing and enthusiastic person, with a passion for environment? If you are, we offer you an opportunity to volunteer with us where you will be making a difference and contributing to a good cause. Let’s work together with us! https://goo.gl/forms/5IzzQ7FSPRP6LWjE3
