Ir. Dr. Noorazizi Bin Mohd Samsuddin holds a Diploma in Mechanical Engineering from UTM, Malaysia, in 2000; Honours Degree in Mechanical Engineering from UTM, Malaysia in 2004; Master in Mechanical Engineering (Computational Fluid Dynamic) from UTM, Malaysia in 2009 and PhD in the field of Manufacturing Engineering (Machining Engineering) at UTeM, Malaysia in 2017. He has vast experience in Mechanical Engineering as an academic as well as professional management consultant in the field of Mechanical & Electrical (M&E), HVAC System and Manufacturing. His specialization are in the area of Design of Experiment (DOE), Response Surface Methodology (RSM), Machining (Medical Tools), and he has won many multiple awards in the Outside Innovation Project and internationally. He has recently won the Gold Medal Award together with two Special Awards from Poland and Russia while joining the 46th International Exhibition of Inventions Geneva, Switzerland through OrthoDrill products.

Currently, he is a Senior Lecturer at Universiti Teknologi Malaysia (UTM), Vice Chairman of IEM Negeri Sembilan Branch, sub-committees of IEM, Membership Drive and Promotions (MDP), and Chairman Training committee of Technological Association of Malaysia TAM Negeri Sembilan Branch. To date, he has delivered numerous talks on the above topic and conducted a number of professional interviews as an organizer at IEM Negeri Sembilan Branch.

Ir. Dr. Noorazizi Bin Mohd Samsuddin is a Consultant Engineer at OGA Sistem Engineering Sdn Bhd, DP Hard Engineering Sdn Bhd and Project Engineer for Bumimaju Engineering Sdn Bhd. Previously; he was a senior lecturer at the Department of Mechanical Engineering, Polytechnic of Port Dickson, guest lecturer at Kolej Teknologi Alpha and guest lecturer at Faculty of Engineering Technology, Universiti Teknologi Tun Hussein Onn Malaysia (UTHM).

Last but not least, he is a highly respected and reputed professional in the field of Mechanical as registered Professional Engineer Practising Certificate with BEM (P.Eng)(PEPC), Corporate Member of IEM (MIEM), Corporate Member of Technological Association of Malaysia, (MTAM), Associate Asean Engineer (AAE) and Associate Asean Engineering Technologist, (AAET) by AFEO Governing Board (Asean Engineering Register).



Senior Lecturer

PhD (Manufacturing), M.Eng (Mechanical) UTM, B.Eng (Hons) Mechanical .UTM, Dip.(Mechanical) UTM.

Engineering and Advanced Technology

Razak Fakulti Teknologi dan Informatik

Level 7, Menara Razak

Universiti Teknologi Malaysia (UTM)

Jalan Sultan Yahya Petra, 54100 Kuala Lumpur

Office:+603-2180 5156 | Mobile: +6012 2010579 | Fax: +603-21805380

Primary Email:

Research Areas/Interest


Optimization, Response Surface Method (RSM), Design of Experiment (DOE), Manufacturing, Machining Process, Precision Medical Tools, Bone Drilling, Industrial Engineering, Structural Dynamic, Computational Fluid Mechanic (CFD), Project Management, Renewal Energy, Air Compressor Gearbox Casing Fabrication, Reinforced Thermoplastic Pipe (RTP), Magnetic Field Signal versus Stress of Carbon Steel Pipe.

Postgraduate Students

PhD Students

Shamsul Faisal Bin Mohd Hussein

Modelling, Simulation, and Optimal Control of Laboratory's Thermal Comfort Using Multiple Actuators for Energy Efficiency

Nur Akmal Hakim Bin Jasni

Magnetic Field Signal Versus Stress of Carbon Steel Pipe

Abdul Qoiyum Bin Mohd Radzi

Development A Low Cut In Speed Of Savonius Wind Turbine Generator For Battery Pack Fast Charging In Passenger Car

Master Students

Amil Hamja Bin Ali Hussin

Study on The Durability of Girder and Lifting Device of Tilting Weir at D5 Klang River by Using Advanced Computational Analysis

Ali M. A. Daban

Deep Learning to Enhance Spark Testing Method for Better Metal Identification

Afza Nizam Bin Mohd Mohamed

Study on The Durability of Orthopedic Drill Bit by Using Magnetic Particle Inspection

Zaini Bin IBrahim



22 Feb. 2020

Recipient of the Gold Medal for the 19th International Expo on Inventions and Innovations. Malaysia Technology Expo 2020 (MTE 2020)

31 Jul. 2019

Recipient of the Gold Medal Best Poster Award MERD19 6th Engineering Research Day 2019 (MERD 2019), organized by Center and Advanced Research UTeM & Shanghai University

18 Apr. 2018

Recipient of the Gold Medal and Best of the Best Platinum Award of International Invention, Innovation and Design 2018 (IIIDCNS 2018), Organized by UiTM

11 - 15 Apr. 2018

Recipient of the Gold Medal and 2 specialized award from Poland & Russia for the 46th International Exhibitions of Inventions Geneva, for the project "ORTHODRILL", ar the Palexpo Exhibition Hall Geneva Switzerland.

20 Nov. 2017

Penganugerahan Hadiah Tesis Kedoktoran Terbaik sempena Majlis Konvokesyen Ke-13 Universiti Teknika Malaysia Melaka (UTem) 2017

18 - 19 Jul. 2017

Recipient of the Gold Medal Best Poster Award ISORIS 17 of International Symposium on Research in Innovation and Sustainability 2017 (ISORIS 2017), organized by Sustainable Responsive Manufacturing.

11 - 13 May 2017

Recipient of the Silver Medal for the 28th International Invention, Innovation & Technology Exhibition (ITEX) 2017, for the project "High Performance Surgical Drill Bit" at the Kuala Lumpur Convention Center Malaysia (KLCC) organized by Ministry of Science Technology and Innovation.

20 Dec. 2016

Recipient of the Certificate Best Paper IRID 2016 of Innovative Research & Industrial Dialogue 2016 (IRID 2016), organized by Faculty of Manufacturing Engineering, UTeM, Melaka.

25 Aug. 2016

Recipient of the Gold Medal for the "Mini UteMex 2016 Inovasi ke Arah pengkomersilan (UTeMEX) 2016, for the product "New Design of High Performance Surgical Drill Bit" UTEM, Melaka.

18 Aug. 2016

Recipient of the Silver Medal for the "Advanced Innovation and Engineering Exhibition (AINEX) 2015, for the project "Auto Crisp Weight Filler Machine", at Zenith Hotel, organized by UMO.


Recipient of the Certificate of Registration "Professional Engineer with Practising Certificate" together with the designatory letters PCPE, by Board of Engineer (BEM) Malaysia

03 Jun. 2015

Recipient of the Certificate of "Associate Asean Engineering Technologist" together woth the designatory letter AAET, by Asean Federation of Engineering Organization (AFEO) Governing Board, Manila, Philippines


Recipient of the Certificate of Registration "Professional Engineer" together with the designatory letter P.Eng and title 'Ir', by Board of Engineer (BEM) Malaysia

20 - 21 Jul. 2013

Recipient of the Certificate for Excellent Paper of the 5th International Conference on Mechanical & Electrical Technology (ICMET 2013), Chengdu, China


Recipient of the KPT Excellent Service Award, Anugerah Perkhidmatan Cemeriang 2010, Kementerian Pengajian Tinggi, Malaysia


Recipient of the Excellent Service Award, Coordinator of External Programmes Long Life Learning, "Kursus Secara Sambilan" Department of Mechanical Engineering, Politeknik Port Dickson