Archives for December 21, 2015

[Our apologies if you receive multiple copies of this CfP]

—————————————-
CALL FOR WiP PAPERS AND DEMOS: RTAS 2016
—————————————-

The 22nd IEEE Rea​l-Time and Embedded Technology and Applications Symposium (RTAS 2016) will be held in Vienna, Austria, as part of the Cyber-Physical Systems Week (CPSWeek) in April 2016. The conference includes a Work in Progress (WiP) and Demo session intended for presentation of recent and on-going work, as well as for demonstrations of tools and technology that have the potential to be used in the design and development of real-time systems. In keeping with the spirit of the main symposium, we invite submissions of WiP papers and demos with an emphasis on system and application aspects. Authors of accepted WiP/demo papers are expected to give a brief presentation to the RTAS’16 audience followed by a poster/demo presentation at the reception held on April 12, 2016.

Web site: http://2016.rtas.org/

WORK IN PROGRESS SESSION
—————————————-

The WiP session at RTAS 2016 is dedicated to new and on-going research in the field of real-time and embedded systems. Authors are invited to submit short papers describing ongoing, unpublished work in all areas of real-time and embedded technology, including applications, systems, tools, methodologies, foundations, wireless sensor networks, and hardware-software co-design. The WiP session provides researchers and developers with an opportunity to discuss evolving and early-stage ideas, and to solicit feedback from the real-time systems community at large.

DEMO SESSION
—————————————-

The demo session at RTAS 2016 will provide a forum for researchers to give a demonstration of their work with concrete systems, tools and prototypes in all areas of real-time embedded technology and applications as part of the CPS Week joint poster/demo session. Authors are invited to submit short technical abstracts (up to 2 pages) describing what will be demonstrated and how the contributions will be illustrated interactively. Authors of papers accepted at RTAS’16 are welcome to propose a demo of their work.

IMPORTANT DATES
—————————————-

Abstract and short paper submission deadline – Jan 16, 2016 at 23:59 GMT-12
Acceptance notification – Jan 29, 2016
Final version (abstracts and papers) – Feb 5, 2016
WiP/Demo session – Apr 12, 2016

TOPICS OF INTEREST
—————————————-

Topics of particular interest include, but are not limited to:
– Applications and case studies
– Runtime environment, OS, and middleware
– Adaptive systems
– Analysis, simulation, and debugging tools
– Cloud and distributed computing
– Composition and component-based systems
– Computer architectures and microprocessors
– Execution-time analysis (static, measurement-based, and probabilistic)
– Formal methods
– Hardware/software co-design
– Many-core systems
– Multi-criticality systems
– Multicore and GPU computing
– Power-, thermal-, and energy-aware computing
– Programming languages and compilers
– Real-time databases
– Scheduling and schedulability analysis
– SoCs, FPGAs, and reconfigurable systems
– Software engineering
– Storage systems
– Synchronization
– System synthesis and optimization
– Testing, validation, and certification
– Virtualization and isolation
– Wireless communications

SUBMISSION OF PAPERS
—————————————-

This year, every author is required to submit two separate documents:

1. An abstract that will appear in the main proceedings. These abstracts must include a conventional header with the title of the WiP/demo paper and the names and affiliations of the authors. The header must be followed by approximately 300 words (i.e. about half a page) that summarize in one or two paragraphs the research context and the specificity of the solution that will be presented/demonstrated. To avoid doubling up the references and skewing the citation count, it is extremely important to note that these abstracts must *not* contain references nor acknowledgments! All references and acknowledgements will be removed from the document before its publication in the main proceedings.

2. A short paper that will be made available online and at the conference.

– WiP papers should consist of 2 to 4 pages in the IEEE 10-point, two-column conference format, including all references and appendices. The submitted paper must be original material that has neither been previously published nor is currently under review by another conference or journal, and will not be submitted elsewhere before notification by RTAS 2016. Submissions will be refereed for quality and relevance. Submissions that fail to comply with the formatting requirements will not be reviewed.

– Demo papers should adhere to the IEEE 10-point, two-column conference format, and be 1 to 2 pages long, including all references and appendices. They should repeat and extend the information provided in the abstract. In addition, they must clearly describe what will be demonstrated and how the contributions will be illustrated interactively. If a demonstration requires special arrangements (in addition to a table, power, and wireless connectivity), please describe them clearly in the paper. Submissions will be evaluated based on technical merit and innovation as well as the potential to stimulate interesting discussions and exchange of ideas at the conference.

Abstracts and short papers must be submitted electronically in PDF.

By submitting a paper, the authors agree and confirm that, in case of acceptance, at least one author will register for the conference and present the WiP/demo in person. Instructions for preparing the final version of accepted WiP/demo papers and their presentation will be sent along with the notification.

WORK-IN-PROGRESS CHAIR
—————————————-

Vincent Nelis, CISTER/INESC TEC and ISEP, Portugal

WORK-IN-PROGRESS PROGRAM COMMITTEE
—————————————-

Borislav Nikolic, CISTER/INESC TEC and ISEP, Portugal
Björn Brandenburg, Max Planck Institute for Software Systems, Germany
David Bol, Microelectronics laboratory – ICTEAM institute, Université catholique de Louvain, Belgium
Benny Akesson, CISTER/INESC TEC and ISEP, Portugal
Leandro Indrusiak, University of York, U.K.
Andrea Marongiu, Integrated Systems Laboratory, ETH, Swiss
Paolo Burgio, University of Modena, Italy
Dakshina Dasari Research and Technology Centre at Robert Bosch, India
Gurulingesh Raravi, Distributed and Mobile Computing group in Xerox Research Center India
Mircea Negrean, IAV GmbH, Germany

DEMO CHAIR
—————————————-

Sophie Quinton, Inria Grenoble Rhône-Alpes, France

DEMO PROGRAM COMMITTEE
—————————————-

Luís Almeida, University of Porto, Portugal
Loïc Fejoz, RealTime-at-Work, France
Daniel Lohmann, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany
Martina Maggio, Lund University, Sweden
Gabriel Parmer, George Washington University, USA
Insik Shin, KAIST, Korea
Marcus Völp, University of Luxemburg, Luxemburg
Dirk Ziegenbein, Bosch GmbH, Germany

—
————————————-
Sophie Quinton
INRIA Grenoble – Rhône-Alpes
655 Avenue de l’Europe – Montbonnot
38334 St Ismier Cedex – FRANCE
tel: +33 4 76 61 55 31
https://team.inria.fr/spades/quinton/
————————————-

2016 Bangkok International Conference on “Innovative Research in Engineering and Technology” (IRET-16) Jan. 21-22, 2016
21st to 22nd January 2016
Bangkok, Thailand

All accepted papers of the conference will be published in the printed conference proceedings with valid International ISBN number that will be registered at: London, UK and papers will be Indexed by DOI and other Indexing agencies. The conference is sponsored by Universal Researchers (UAE). One Best Session Paper will be selected from each oral session. The Certificate for Session Best Papers will be awarded after each session of the conference

Topics/Scope
-Computer Science & Engineering
-Data Mining
-Artificial Intelligence
-Chemical Engineering
-Civil Engineering
-Electrical Engineering
-Information Technology
-Electronics and Communication Engineering
-Industrial Engineering
-Internet
-Image and Signal Processing
-Mechanical Engineering
-Aeronautical Engineering
-Robotics
-Software Engineering
-and its Applications

SUBMISSION METHODS
1. Electronic Submission System; ( .doc/.docx/.pdf formats) using “Paper Submission link”
OR
2. Email: cs@iaetr.org
Paper Format: http://uruae.org/ckfinder/userfiles/files/PaperTemplate-URUAE.doc

REGISTRATION FEE
Authors (Student)*: 190 USD
Authors (Non Student)*: 225 USD
Coauthor/Listener: 175 USD

Enquiries: cs@iaetr.org
Web address: http://iaetr.org/conference.php?slug=IRET-16&sid=1&catDid=98
Sponsored by: Universal Researchers (UAE)-IAETR

CONTACT US
Ms. Rosy Tan Email: cs@iaetr.org Phone: +44 7452 131713, +971 52 829 9493 (Can use LINE, Whatsapp, Viber)

CONFERENCE VENUE
Mercure Bangkok Siam
Address: 927 Rama 1 Road Wangmai – Pathumwan; 10330 BANGKOK – THAILAND

MECO’2016

5th Mediterranean Conference on

Embedded Computing

Bar • Montenegro • June 12-16, 2016

http://embeddedcomputing.me

Call for Papers

MECO’2016 – the 5^th Mediterranean Conference on Embedded Computing (MECO 2016) is the next of a series of very successful MECO events. It is an International Scientific Forum aimed at presentation and discussion of leading achievements in modeling, analysis, development, validation and application of embedded computing systems. MECO 2016 will provide an opportunity for scientists, engineers and researchers to discuss new applications, design problems, ideas, solutions, research and development results, experiences and work-in-progress in this important technological area. Topics of interest include, but are not limited to:

ñ     Software and Hardware Architectures for Embedded Systems

ñ     Systems on Chip (SoCs) and Multicore Systems

ñ     Communications, Networking and Connectivity

ñ     Internet of Things

ñ     Sensors and Sensor Networks

ñ     Mobile and Pervasive/Ubiquitous Computing

ñ     Distributed Embedded Computing

ñ     Real-Time Systems

ñ     Adaptive Systems

ñ     Reconfigurable Systems

ñ     Design Methodology and Tools

ñ     Application Analysis and Parallelization

ñ     System Architecture Synthesis

ñ     Multi-objective Optimization

ñ     Low-power Design and Energy Management

ñ     Hardware/Software Simulation

ñ     Rapid prototyping

ñ     Testing and Benchmarking

ñ     Micro and Nano Technology

ñ     Organic/Flexible/Printed Electronics

ñ     MEMS

ñ     VLSI Design and Implementation

ñ     Microcontroller and FPGA Implementation

ñ     Embedded Real-Time Operating Systems

ñ     Cloud Computing in Embedded System Development

ñ     Digital Filter Design

ñ     Digital Signal Processing and Applications

ñ     Image and Multidimensional Signal Processing

ñ     Embedded Systems in Multimedia and Communications

ñ     Consumer Electronics

ñ     Wearable and Mobile Healthcare, Well-being and Security

ñ     Emergency and Disaster Management

ñ     Identification and Supervision Systems

ñ     Industrial, Bio-Medical, Automotive and Avionic Systems

ñ     Embedded Robotics, Instrumentation and Measurement

ñ     Embedded Systems in Energy Efficiency

Venue: MECO’2016 will be held in Hotel Princess**** (http://www.hotelprincess.me) Bar (http://www.visit-montenegro.com/main-cities/bar/), Montenegro (http://www.visit-montenegro.com/). Bar is an amazing Mediterranean city with beautiful beaches and green areas. Besides being Montenegro’s main seaport, Bar and its surroundings are a popular tourist destination. The Bar municipality stretches to the southern shore of a Skadar lake of an extraordinary beauty, and encompasses Krajina region being excellent for leisure and hiking. Smaller settlements near Bar, with their long sandy beaches, are favorite destinations for sunbathing. Bar has many interesting touristic attractions like old town from the 15th century, castle of King Nikola, several churches, cathedrals and mosques, and the Old Olive Tree said to be one of the oldest olive trees in Europe and the world. Bar is well connected with European cities by sea, road, air and train.

Submission of papers: Prospective authors are invited to submit full-length, four-page papers, strictly according to the IEEE Conference Standards and viahttp://embeddedcomputing.me.

Conference quality: Conference content will be submitted for inclusion into IEEE Xplore, as well as, several other Abstracting and Indexing (A&I) databases. Currently MECO is covered by SCOPUS, Web of Science, Google Scholar, Research Gate etc. Several high-profile journals will publish extended versions of selected papers from ECYPS.

Accompanying events: MECO’2016 includes ECYPS’2016 – the 4th EUROMICRO/IEEE Workshop on Embedded and Cyber-Physical Systems(http://embeddedcomputing.me), and  will additionally host several accompanying Workshops/Sessions and distinguished student papers. Proposals of accompanying Workshops/Sessions should be submitted to Radovan Stojanović (stox@ac.me).

Important Deadlines:

February 07, 2016, Paper submission deadline

March 13, 2016, Acceptance/rejection notification

March 27, 2016, Final paper submission and author registration deadline

May 02, 2016, Registration deadline

Fees: The participation fees of MECO and ECYPS are low to encourage participation of young scientists and colleagues from developing countries.

Conference Chairs:

Radovan Stojanović, University of Montenego, Montenegro

Lech Jóźwiak, Eindhoven University of Technology, Netherlands

Scientific Committee:

Thanos Stouraitis, University of Patras, IEEE Fellow, Greece

Srdjan Stanković, University of Montenegro, Montenegro

Yervant Zorian. Synopsys, USA

Veljko Milutinović, University of Belgrade, IEEE Fellow, Serbia

Christos Koulamas, ISI, Patras, Greece

Ion Tutanescu, University of Pitesti, Romania

Milan Prokin, University of Belgrade, Serbia.

Andrej Skraba, University of Maribor, Slovenia

Dejan Karadaglić, Glasgow Caledonian University, UK

Cornel Ioana, INP Grenoble, France

Roberto Giorgi, University of Siena, Italy

Saso Kocevski, University of Stip, Macedonia

Betim Cico, Polytechnic University of Tirana, Albania

George Papadopoulos, University of Cyprus, Cyprus

Gerhard Rath, University of Leoben, Austria

Milan Stork, University of West Bohemia, Czech Republic

Emil Jovanov, University of Alabama, USA

Roman Bazylevych, Lviv Polytechnic Univ., Ukraine

Natasa Nesković, IEEE S&M Section, Serbia

Yury Bekhtin, Ryazan State Radio Eng. University, Russia

Sergey Vityazev, Ryazan State Radio Eng. University, Russia

Ioannis Sourdis, Chalmers University, Sweden,

Jari Viik, Tampere University of Technology, Finland

Josep-Ramon Herrero, UPC, Spain

Adam Postula, University of Queensland, Australia

Bilgin Metin, Bogazici University, Turkey

Miroslav Hagara, STU, Slovakia

Anetta Caplanova, EUBA, Slovakia

Elissaveta Gourova, Sofia University, Bulgaria

Paris Kitsos, Hellenic Open University, Greece

Drazen Jurišić, University of Zagreb, Croatia

Almir Badnjević, University of Sarajevo, B&H

Local Organizing Committee:

Budimir Lutovac, University of Montenegro, Chair

Dmitry Tarasov, MANT, Montenegro, Co-Chair

Marko Kaludjerović, MANT Montenegro

[Our apologies if you receive multiple copies of this CfP]

—————————————-
CALL FOR WiP PAPERS AND DEMOS: RTAS 2016
—————————————-

The 22nd IEEE Rea​l-Time and Embedded Technology and Applications Symposium (RTAS 2016) will be held in Vienna, Austria, as part of the Cyber-Physical Systems Week (CPSWeek) in April 2016. The conference includes a Work in Progress (WiP) and Demo session intended for presentation of recent and on-going work, as well as for demonstrations of tools and technology that have the potential to be used in the design and development of real-time systems. In keeping with the spirit of the main symposium, we invite submissions of WiP papers and demos with an emphasis on system and application aspects. Authors of accepted WiP/demo papers are expected to give a brief presentation to the RTAS’16 audience followed by a poster/demo presentation at the reception held on April 11, 2016.

Web site: http://2016.rtas.org/

WORK IN PROGRESS SESSION
—————————————-

The WiP session at RTAS 2016 is dedicated to new and on-going research in the field of real-time and embedded systems. Authors are invited to submit short papers describing ongoing, unpublished work in all areas of real-time and embedded technology, including applications, systems, tools, methodologies, foundations, wireless sensor networks, and hardware-software co-design. The WiP session provides researchers and developers with an opportunity to discuss evolving and early-stage ideas, and to solicit feedback from the real-time systems community at large.

DEMO SESSION
—————————————-

The demo session at RTAS 2016 will provide a forum for researchers to give a demonstration of their work with concrete systems, tools and prototypes in all areas of real-time embedded technology and applications as part of the CPS Week joint poster/demo session. Authors are invited to submit short technical abstracts (up to 2 pages) describing what will be demonstrated and how the contributions will be illustrated interactively. Authors of papers accepted at RTAS’16 are welcome to propose a demo of their work.

IMPORTANT DATES
—————————————-

Abstract and short paper submission deadline (FIRM) – Jan 9, 2016 at 23:59 GMT-12
Acceptance notification – Jan 18, 2016
Final version (abstracts) – Jan 22, 2016
Final version (papers) – Feb 5, 2016
WiP/Demo session – Apr 11, 2016

Please note that the submission deadline is a firm deadline and will not be extended.

TOPICS OF INTEREST
—————————————-

Topics of particular interest include, but are not limited to:
– Applications and case studies
– Runtime environment, OS, and middleware
– Adaptive systems
– Analysis, simulation, and debugging tools
– Cloud and distributed computing
– Composition and component-based systems
– Computer architectures and microprocessors
– Execution-time analysis (static, measurement-based, and probabilistic)
– Formal methods
– Hardware/software co-design
– Many-core systems
– Multi-criticality systems
– Multicore and GPU computing
– Power-, thermal-, and energy-aware computing
– Programming languages and compilers
– Real-time databases
– Scheduling and schedulability analysis
– SoCs, FPGAs, and reconfigurable systems
– Software engineering
– Storage systems
– Synchronization
– System synthesis and optimization
– Testing, validation, and certification
– Virtualization and isolation
– Wireless communications

SUBMISSION OF PAPERS
—————————————-

This year, every author is required to submit two separate documents:

1. An abstract that will appear in the main proceedings. These abstracts must include a conventional header with the title of the WiP/demo paper and the names and affiliations of the authors. The header must be followed by approximately 300 words (i.e. about half a page) that summarize in one or two paragraphs the research context and the specificity of the solution that will be presented/demonstrated. To avoid doubling up the references and skewing the citation count, it is extremely important to note that these abstracts must *not* contain references nor acknowledgments! All references and acknowledgements will be removed from the document before its publication in the main proceedings.

2. A short paper that will be made available online and at the conference.

– WiP papers should consist of 2 to 4 pages in the IEEE 10-point, two-column conference format, including all references and appendices. The submitted paper must be original material that has neither been previously published nor is currently under review by another conference or journal, and will not be submitted elsewhere before notification by RTAS 2016. Submissions will be refereed for quality and relevance. Submissions that fail to comply with the formatting requirements will not be reviewed.

– Demo papers should adhere to the IEEE 10-point, two-column conference format, and be 1 to 2 pages long, including all references and appendices. They should repeat and extend the information provided in the abstract. In addition, they must clearly describe what will be demonstrated and how the contributions will be illustrated interactively. If a demonstration requires special arrangements (in addition to a table, power, and wireless connectivity), please describe them clearly in the paper. Submissions will be evaluated based on technical merit and innovation as well as the potential to stimulate interesting discussions and exchange of ideas at the conference.

Abstracts and short papers must be submitted electronically in PDF.

By submitting a paper, the authors agree and confirm that, in case of acceptance, at least one author will register for the conference and present the WiP/demo in person. Instructions for preparing the final version of accepted WiP/demo papers and their presentation will be sent along with the notification.

WORK-IN-PROGRESS CHAIR
—————————————-

Vincent Nelis, CISTER/INESC TEC and ISEP, Portugal

WORK-IN-PROGRESS PROGRAM COMMITTEE
—————————————-

Borislav Nikolic, CISTER/INESC TEC and ISEP, Portugal
Björn Brandenburg, Max Planck Institute for Software Systems, Germany
David Bol, Microelectronics laboratory – ICTEAM institute, Université catholique de Louvain, Belgium
Benny Akesson, CISTER/INESC TEC and ISEP, Portugal
Leandro Indrusiak, University of York, U.K.
Andrea Marongiu, Integrated Systems Laboratory, ETH, Swiss
Paolo Burgio, University of Modena, Italy
Dakshina Dasari Research and Technology Centre at Robert Bosch, India
Gurulingesh Raravi, Distributed and Mobile Computing group in Xerox Research Center India
Mircea Negrean, IAV GmbH, Germany

DEMO CHAIR
—————————————-

Sophie Quinton, Inria Grenoble Rhône-Alpes, France

DEMO PROGRAM COMMITTEE
—————————————-

Luís Almeida, University of Porto, Portugal
Loïc Fejoz, RealTime-at-Work, France
Daniel Lohmann, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany
Martina Maggio, Lund University, Sweden
Gabriel Parmer, George Washington University, USA
Insik Shin, KAIST, Korea
Marcus Völp, University of Luxemburg, Luxemburg
Dirk Ziegenbein, Bosch GmbH, Germany

—
————————————-
Sophie Quinton
INRIA Grenoble – Rhône-Alpes
655 Avenue de l’Europe – Montbonnot
38334 St Ismier Cedex – FRANCE
tel: +33 4 76 61 55 31
https://team.inria.fr/spades/quinton/
————————————-

ECYPS’2016

4^th EUROMICRO/IEEE Workshop on

Embedded and Cyber-Physical Systems

Bar • Montenegro • June 12-16, 2016

http://embeddedcomputing.me

Call for Papers

ECYPS’2016 – the 4^th EUROMICRO/IEEE Workshop on Embedded and Cyber-Physical Systems will be held in the scope ofMECO’2016 – the 5^th Mediterranean Conference on Embedded Computing. It is devoted to cyber-physical systems (CPS) for modern applications that usually require high-performance, low energy consumption, high safety, security and reliability. It addresses the specification, validation, architectures, technology, hardware, software, design methodology and EDA tools for such systems. Its target participants are academic researchers and teachers, industrial researchers, developers and decision-makers, and Ph.D. students. It gives an excellent opportunity to disseminate fresh research results from European, international and other R&D projects. The topics of main interest include the following:

ñ advanced applications and case studies of systems in consumer appliances,  healthcare, personal assistance, environmental and safety monitoring, industrial and leaving-space automation, transportation, automotive, aerospace, aviation, energy generation,  communications, tele-operation,  control, robotics, infrastructure, etc.

ñ mobile, autonomous, wearable and implantable systems

ñ application (software) modeling, analysis, parallelization and mapping for high-performance and low-energy computing

ñ multi-domain modeling, analysis, synthesis, simulation, integration and validation of heterogeneous systems

ñ multi-objective and multi-domain optimization and co-design of heterogeneous systems

ñ MPSoCs, sensors, actuators, MEMS, their integration and packaging

ñ sensor-based (distributed, networked) monitoring and control

ñ sub-system arrangement and communication in complex heterogeneous (3D) systems

ñ safety, security and reliability of complex heterogeneous systems

Venue: ECYPS’2016 will be held in Hotel Princess**** (http://www.hotelprincess.me) Bar (http://www.visit-montenegro.com/main-cities/bar/), Montenegro (http://www.visit-montenegro.com/). Bar is an amazing Mediterranean city with beautiful beaches and green areas. Besides being Montenegro’s main seaport, Bar and its surroundings are a popular tourist destination. The Bar municipality stretches to the southern shore of a Skadar lake of an extraordinary beauty, and encompasses Krajina region being excellent for leisure and hiking. Smaller settlements near Bar, with their long sandy beaches, are favorite destinations for sunbathing. Bar has many interesting touristic attractions like old town from the 15th century, castle of King Nikola, several churches, cathedrals and mosques, and the Old Olive Tree said to be one of the oldest olive trees in Europe and the world. Bar is well connected with European cities by sea, road, air and train.

Submission of papers: Prospective authors are invited to submit full-length, four-page papers, strictly according to the IEEE Conference Standards and viahttp://embeddedcomputing.me.

Conference quality: Conference content will be submitted for inclusion into IEEE Xplore, as well as, several other Abstracting and Indexing (A&I) databases. Currently ECYPS is covered by SCOPUS, Web of Science, Google Scholar, Research Gate etc. Several high-profile journals will publish extended versions of selected papers from ECYPS.

Accompanying events: MECO’2016 and ECYPS’2016 are twin events that will additionally host several accompanying Workshops/Sessions and distinguished student papers. Proposals of accompanying Workshops/Sessions should be submitted to Radovan Stojanović (stox@ac.me).

Important Deadlines:

February 07, 2016, Paper submission deadline

March 13, 2016, Acceptance/rejection notification

March 27, 2016, Final paper submission and author registration deadline

May 02, 2016, Registration deadline

Fees: The participation fees of MECO and ECYPS are low to encourage participation of young scientists and colleagues from developing countries.

Conference Chairs:

Lech Jóźwiak, Eindhoven University of Technology, Netherlands

Radovan Stojanović, University of Montenego, Montenegro

Scientific Committee:

Koen Bertels, Delft University of Technology, Netherlands

Victor Goulart,Kyushu University, Japan

Yervant Zorian. Synopsys, USA

Miguel Figueroa, Univesity of Concepcion, Chile

Erwin Grosspietsch, Euromicro, Germany

Ilker Hamzaoglu, Sabanci University, Turkey

Lech Jóźwiak, Eindhoven University of Technology, Netherlands

Paris Kitsos, Open Hellenic University, Patras, Greece

Akash Kumar, National Univ. Singapore, Singapore

Francesco Leporati, University of Pavia, Italy

Menno Lindwer, Intel, Netherlands

Jan Madsen, Technical University of Denmark, Denmark

Veljko Milutinovic, University of Belgrade, Serbia

Nadia Nedjah, State University of Rio de Janeiro, Brazil

Smail Niar, University of Valenciennes, France

Horácio .C Neto, Technical University of Lisbon, Portugal

Alex Orailoglu, University of California at San Diego, USA

Sri Parameswaran, UNSW, Australia

Adam Postula, University of Queensland, Australia

Peter Puschner, Vienna Univ. of Technology, Austria

Davide Quaglia, University of Verona, Italy

Majid Sarrafzadeh, UCLA, California, USA

Radovan Stojanović, University of Montenegro, Montenegro

Ioannis Sourdis, Chalmers Univ. of Technology, Sweden

Alice M. Tokarnia, State University of Campinas, Brazil

Heinrich Vierhaus, Brandenburg Uni. of Technology, Germany

Eugenio Villar, University of Cantabria, Spain

Arda Yurdakul, Bogazici University, Turkey

Local Organizing Committee:

Budimir Lutovac, University of Montenegro, Chair

Dmitry Tarasov, MANT, Montenegro, Co-Chair

Marko Kaludjerović, MANT Montenegro