Growing as an Educator: Train the Trainer in Melaka
In July 2026, I attended the Train The Trainer (TTT) course, NCS-004:2017, at Melaka Skill Training Center. Stepping back into the role of a learner was a valuable chance to reflect on how I plan my sessions, explain ideas, and keep students engaged. The classroom presentations and exchanges with fellow participants made the experience practical and rewarding. Beyond the course, I also found time to wander through Jonker Walk at night and enjoy Melaka’s riverside lights near Jambatan Tan Kim Seng. The colourful streets and waterfront offered a pleasant change of pace after the training sessions, combining professional learning with a few memorable moments exploring Melaka.
作为教育者不断成长：马六甲 Train The Trainer 培训
2026年7月，我在 Melaka Skill Training Center 参加了 Train The Trainer（TTT）培训课程，课程代码为 NCS-004:2017。重新回到学习者的角色，让我有机会反思如何规划课堂、讲解概念，以及让学生更投入学习。课堂展示和与其他学员的交流，让这次学习既贴近实践，也收获良多。课程之余，我也抽空夜游 Jonker Walk，欣赏 Jambatan Tan Kim Seng 附近的马六甲河畔灯光。色彩缤纷的街景与河岸风光，为培训后的时光带来轻松的节奏，让这趟旅程既有专业学习的收获，也留下了探索马六甲的美好回忆。
Exploring Biomedical Manufacturing and Research: Visits to Nitium UKM, Kedidi, and USIM
On 19–20 July 2023, we visited Nitium at UKM, Kedidi in Sepang, and USIM in Nilai to learn about their work and facilities. At Nitium, we explored metal injection moulding and the pioneering work of Dr. Asif and Prof. Hussain Ismail. Our visit to Kedidi offered insight into conventional prosthetic-leg fabrication using fibreglass. At USIM, we visited Dr. Ifwat and Dr. Arif Jamali and learned about their 3D printer and high-performance computer. The two-day visit connected perspectives on metal processing, prosthetic fabrication, and digital research tools, broadening our understanding of their potential applications in biomedical engineering.
探索生物医学制造与科研：参访 Nitium UKM、Kedidi 与 USIM
2023年7月19日至20日，我们先后参访了 UKM 的 Nitium、位于雪邦的 Kedidi，以及位于汝来的 USIM，了解各机构的工作与设施。在 Nitium，我们了解了金属注射成型技术，以及 Dr. Asif 和 Prof. Hussain Ismail 的开创性工作。在 Kedidi，我们了解了采用玻璃纤维材料制作传统下肢假肢的方法。在 USIM，我们拜访了 Dr. Ifwat 和 Dr. Arif Jamali，并了解他们的3D打印机及高性能计算机。此次为期两天的访问，汇集了金属加工、假肢制作及数字科研工具等不同视角，加深了我们对这些技术在生物医学工程领域潜在应用的理解。
Empowering Biomedical Innovation: UTM DBEHS Research Team’s Industry Visit to UMMC, CiRNeT UPM, and Ace High Technology
On 10–11 July 2024, I led a benchmarking and knowledge exchange visit with my UTM colleagues, Assoc Prof Ir Ts Dr Mohd Hanif Ramlee, Dr Muhammad Faiz Md Shakhih, and Dr Mohamad Ikhwan Kori. We began at the Department of Rehabilitation Medicine, UMMC, and BioApps Sdn Bhd, gaining firsthand insight into clinical rehabilitation facilities, patient care workflows, and prosthetic technology, particularly customised artificial limb fabrication. At UPM’s CiRNeT, we discussed research grant management, industry networking models, and approaches to securing major government research funding. We concluded the two-day visit at Ace High Technology Sdn Bhd, exploring precision engineering design and specialised manufacturing capabilities relevant to biomedical device development. The visit broadened our technical perspectives and highlighted opportunities for collaboration across clinical practice, research, and industry to support local biomedical engineering innovation.
推动生物医学创新：UTM DBEHS 科研团队赴 UMMC、UPM CiRNeT 及 Ace High Technology 开展行业访问
2024年7月10日至11日，我带领团队开展了为期两天的对标考察与交流访问，同行的 UTM 同事包括 Assoc Prof Ir Ts Dr Mohd Hanif Ramlee、Dr Muhammad Faiz Md Shakhih 和 Dr Mohamad Ikhwan Kori。我们首先到访 UMMC 康复医学科及 BioApps Sdn Bhd，实地了解临床康复设施、患者照护流程和假肢技术，尤其是定制假肢制作。随后，在 UPM 的 CiRNeT，我们就科研项目资助管理、产学合作网络模式及申请重要政府科研资助项目的方法进行了交流。行程最后一站是 Ace High Technology Sdn Bhd，重点了解与生物医学器械开发相关的精密工程设计和专业制造能力。此次访问拓宽了我们的技术视野，也帮助我们发现了临床实践、科研与产业之间的合作机会，以支持本地生物医学工程创新。
Bringing Biomaterial Characterisation to Life: A Visit to UIRL
I accompanied my SEBB4123 students, now coded SKEB4123, on a visit to the University Industry Research Laboratory (UIRL) at T03, UTM Johor Bahru, as part of the Biomaterial Characterisation and Analysis course. Students explored advanced characterisation facilities, including FESEM and XRD, connecting classroom lessons on material surfaces, structures and properties with real research applications. It was encouraging to see them enjoying the experience and showing enthusiasm for learning beyond the lecture room. I hope this exposure strengthens their curiosity, confidence and motivation as future biomedical engineers. My sincere thanks to the UIRL team for welcoming us and sharing their knowledge.
让生物材料表征走进现实：UIRL 实验室参访
作为生物材料表征与分析课程的一部分，我陪同 SEBB4123（现课程代码为 SKEB4123）的学生，参访了位于 UTM 柔佛校区 T03 的大学与产业研究实验室（UIRL）。学生们近距离了解场发射扫描电子显微镜（FESEM）、X 射线衍射（XRD）等先进表征设施，将课堂上有关材料表面、结构与性能的知识与实际研究应用联系起来。看到他们享受参访过程，并对课堂以外的学习展现热情，令人欣慰。希望这次体验能够增强他们的好奇心、自信与学习动力，为成为未来的生物医学工程师做好准备。衷心感谢 UIRL 团队的热情接待与知识分享。
Strengthening Research Practice: Completing GCP Certification
Alhamdulillah, I completed the Good Clinical Practice (GCP) Professional Course from 5 to 7 May 2025 at MaGICX, UTM Johor Bahru, organised by the IJN–UTM Cardiovascular Engineering Centre. The course strengthened my understanding of ethical clinical research, including participant protection, informed consent, regulatory requirements and data integrity. Completing the training also required a one-hour examination comprising 40 multiple-choice questions, which I passed, attaining GCP certification on 7 May 2025. As a biomedical engineering academic, this experience reinforced the importance of connecting technical innovation with responsible research practices. My sincere thanks to the organisers, speakers and fellow participants for a valuable learning experience.
提升研究实践：完成 GCP 培训与认证
Alhamdulillah（感谢真主），我于2025年5月5日至7日在 UTM 柔佛校区的 MaGICX，完成了由 IJN–UTM 心血管工程中心主办的临床试验质量管理规范（GCP）专业课程。课程加深了我对临床研究伦理的理解，涵盖受试者保护、知情同意、监管要求及数据完整性。完成培训还须参加一小时、共40道选择题的考试。我顺利通过考试，并于2025年5月7日取得 GCP 认证。作为生物医学工程领域的学者，这次经历让我更加重视将技术创新与负责任的研究实践相结合。衷心感谢主办方、讲者和其他学员，让这次学习收获良多。
Read the UTM News story
Advancing Nanomedicine & Optical Sensing: ICONMAR 2025 Penang
I had the privilege of delivering two oral presentations at the 2nd International Conference on Nanotechnology & Materials Research (ICONMAR 2025) held on 2 October 2025 in Penang, Malaysia. Our research highlighted key advancements in targeted therapeutics and non-invasive detection, entitled "Nanotechnology-Based Transdermal Drug Delivery: Characterization of Electrospun Temozolomide-Cellulose Acetate Nanofibers" and "Comparative Analysis of Near-Infrared Light Absorption in Glucose and Simulated Blood Component Solutions with and without Ultrasound Enhancement." Sharing our findings provided a fantastic opportunity to exchange ideas with international scholars, while taking time to walk around Bahang Bay, enjoy its scenic beach, and try the thrilling banana boat ride made the trip exceptionally memorable. Sincere thanks to my co-authors, collaborators, and the conference organizers for hosting such a fruitful event!
纳米医学与光学探测前沿：ICONMAR 2025 槟城研讨会
非常荣幸能于2025年10月2日在马来西亚槟城举行的“第二届纳米技术与材料研究国际会议”（ICONMAR 2025）上发表两项口头报告。我们分享了团队在靶向给药与无创探测领域的最新成果：《基于纳米技术的透皮给药：电纺替莫唑胺-醋酸纤维素纳米纤维的表征》以及《超声增强下葡萄糖及模拟血液成分溶液近红外光吸收率的对比分析》。除了与来自各地的专家学者深入交流学术前沿，我也借此机会漫步 Bahang Bay 海滩，体验了刺激好玩的香蕉船，让这次研学之旅更加充实精彩。衷心感谢合作团队的全力支持以及主办单位的精心组织
Academic Insights & Exploration: ISET 2025 Taiwan
I had the privilege of presenting our team's research paper, entitled "Chemical Profiling, Bioactive Compounds, Antioxidant, and Anti-Inflammatory Activities of Heterotrigona Itama Propolis as a Natural Preservative for Nanotechnology-Based Delivery Systems," at The 7th International Symposium on Engineering and Technology (ISET 2025), hosted by National Chung Hsing University (NCHU) in Taichung, Taiwan. Presenting our work on stingless bee propolis as a natural bio-preservative for advanced delivery applications provided an extraordinary platform to connect with international researchers, engage in thought-provoking technical discussions, and gain fresh perspectives across engineering and biomedical domains. Beyond the academic sessions at NCHU, this journey was made truly memorable by exploring the vibrant local sights, scenic landscapes, and rich cultural destinations around Taichung and Taiwan. Sincere thanks to my co-authors, collaborators, and the conference organizers for making this academic trip both highly fruitful and personally inspiring!
台湾 ISET 2025 学术与探索之旅
非常荣幸能在台湾台中国立中兴大学（NCHU）举行的“第七届工程与技术国际研讨会”（ISET 2025）上发表我们团队的最新研究成果《银蜂胶作为纳米递送系统天然防腐剂之化学剖析、生物活性化合物、抗氧化及抗炎活性研究》。在此次会议中，我们向来自全球的专家学者展示了银蜂胶在新型生物递送系统中的应用潜能，并通过多场深入的学术研讨获得了许多宝贵的启发与反馈。除了充实而精彩的学术日程，我也借此机会游览了台中及台湾各地的地标景点与风土人情，切身体验了当地独特的文化魅力。衷心感谢论文共同作者、合作团队以及 ISET 2025 组委会的全力支持，让这次学术与文化交流之旅收获满满、圆满落幕
UTM–FTUI Global Outreach Program: Strengthening Biomedical Engineering Collaboration
As the Program Director, I am pleased to share the success of our Global Outreach Program held from 22 to 26 September 2024 at Universitas Indonesia. Our students from the Biomedical Engineering and Health Sciences Student Society at UTM had an enriching experience exploring research facilities at i-CELL and Science Techno Park, participating in academic sharing sessions, and engaging in the hands-on HEARTBEAT Workshop to design electronic stethoscopes alongside UI students. Beyond academic activities, our students genuinely enjoyed experiencing local culture and building meaningful international connections. On behalf of UTM, I express my sincere appreciation to the Faculty of Engineering, Universitas Indonesia, including Prof. Dr. Ir. Heri Hermansyah, Dr. Eng. Ir. Arief Udhiarto, Dr. Basari, and the Association of Biomedical Engineering for their warm hospitality and excellent coordination. Their generous support provided our participants with an unforgettable learning journey. We look forward to continuing this fruitful partnership through future joint research, innovation, and student exchange initiatives.
UTM–FTUI 国际研学拓展计划：深化生物医学工程领域合作
作为本次项目的负责人，我非常高兴宣布马来西亚工艺大学与印度尼西亚大学工程学院于2024年9月22日至26日联合举办的国际研学拓展计划圆满落幕。在此次交流中，我们生物医学工程与健康科学系的学生深入参观了印尼大学的研发展示中心与科技园区，并与当地师生共同参与了电子听诊器设计工作坊。除了丰富的学术探讨与实践环节，学生们也体验了当地的文化特色，建立了深厚的国际友谊。我谨代表马来西亚工艺大学，向印度尼西亚大学工程学院的院领导、系主任以及学生会团队致以最诚挚的感谢。感谢印尼大学师生们的无私分享与热情接待，为我们的学员打造了一次意义非凡的研学之旅。期待未来双方能够继续保持紧密合作，在科研创新与学术交流领域创造更多可能。
Read the full story
Hands-on Biomedical Innovation: MediBox & MediFly at UTM
I had the privilege of serving as an instructor for the 3D Printing (MediBox) session during the Biomed Innovators Edutour Camp 2025 at Universiti Teknologi Malaysia (UTM). It was a rewarding experience to guide the students in using CAD design and 3D printing technology to create practical medical tools. I would like to express my sincere appreciation to all the participants for their active enthusiasm and attention throughout the program. A special thank you to Dr. Muhammad Faiz and Dr. Muhammad Amin for the kind invitation and for organizing such a engaging and successful event. I look forward to working together again in future programs!
UTM 生物医学创新者教育营：MediBox 3D 打印实践课程
非常荣幸能受邀在马来西亚工艺大学（UTM）举办的“2025年生物医学创新者教育营”中担任 3D 打印（MediBox）课程的主讲导师。在活动中，学生们通过 CAD 软件设计与 3D 打印技术，亲手将医疗工具的设计理念转化为实物。特别感谢所有学员的认真专注与积极参与。同时，衷心感谢 Dr. Muhammad Faiz 的邀请与精心筹划，打造了如此精彩且意义非凡的活动。期待未来能有更多合作的机会！
Read the full story
UniMaroon Half Marathon: A Run to Remember
On 24 May 2026, I joined the UniMaroon Half Marathon at UTM Skudai, organised by SEJATI UTM. I completed the course in 2 hours 19 minutes, taking time to enjoy the scenery and the atmosphere along the route. The experience was a useful reminder that endurance, pacing and mutual encouragement matter in sport as they do in academic work. My sincere thanks to the organisers and student volunteers for their careful planning, cheerful support and smooth coordination throughout the morning.
UniMaroon 半程马拉松：一次难忘的奔跑
2026年5月24日，我参加了由 SEJATI UTM 在 UTM Skudai 举办的 UniMaroon 半程马拉松。我以2小时19分钟完成比赛，并一路欣赏风景、享受奔跑的氛围。这次经历再次提醒我，耐力、节奏与相互鼓励，在体育运动和学术工作中同样重要。衷心感谢主办方和学生志愿者在整个上午的周密安排、热情支持与顺畅协调。
PhD Viva: Congratulations, Asyikin Sasha
Congratulations to Asyikin Sasha binti Mohd Hanif on passing her PhD viva on 19 June 2026. Her thesis, “Fabrication, Characterisation and In Vitro Assessment of Temozolomide-Loaded Electrospun Cellulose Acetate Nanofibres for Glioblastoma Treatment”, marks an important milestone in her research journey. I appreciate her commitment, persistence and hard work throughout the project. Thank you to everyone who supported her along the way. Wishing Asyikin continued success in her future research and career.
博士论文答辩：祝贺 Asyikin Sasha
祝贺 Asyikin Sasha binti Mohd Hanif 于2026年6月19日顺利通过博士论文答辩。她的论文《负载替莫唑胺的电纺醋酸纤维素纳米纤维的制备、表征及用于胶质母细胞瘤治疗的体外评估》，是她研究旅程中的一个重要里程碑。感谢她在整个项目中的投入、坚持与努力，也感谢所有一路给予支持的人。祝愿 Asyikin 今后的研究和事业顺利发展。
Mental Health in a Digital World: A Community Conversation
On 18 October 2026, I represented the Bioinspira research group as moderator of “Kesan Dunia Maya kepada Kesihatan Mental” at Masjid Taman Sri Pulai, Johor. The forum offered a timely opportunity to reflect on digital life and mental well-being with the community. For me, moderating was a reminder of the value of listening, making space for different perspectives and encouraging open conversations about mental health. Thank you to the panellists, organisers and everyone who joined us.
数字世界中的心理健康：一场社区对话
2026年10月18日，我代表 Bioinspira 研究团队，在柔佛 Masjid Taman Sri Pulai 举行的“Kesan Dunia Maya kepada Kesihatan Mental”（网络世界对心理健康的影响）论坛担任主持人。这场论坛为社区提供了一个契机，共同思考数字生活与心理健康。对我而言，主持这场对话也提醒了我：认真聆听、尊重不同观点，以及鼓励人们坦诚交流心理健康话题，都十分重要。感谢各位嘉宾、主办团队及所有参与者。
Conquering Gunung Ledang for the First Time
A heartfelt thank you to the Faculty of Electrical Engineering (FKE) and Universiti Teknologi Malaysia (UTM) for organising the Johor Merdeka Hike 2026. Our journey began at 4:30 AM, gathering at Tasik Ilmu UTM before heading to Tangkak. Climbing Gunung Ledang was physically demanding, but completing the hike together made every step rewarding. Sharing that challenge in nature ahead of National Day brought together fitness, teamwork and pride in Malaysia. Proud to be part of the UTM community, and looking forward to more active initiatives like this.
首次挑战 Gunung Ledang
衷心感谢电气工程学院（FKE）及 Universiti Teknologi Malaysia（UTM）举办 Johor Merdeka Hike 2026。我们凌晨4时30分在 UTM 的 Tasik Ilmu 集合，然后前往东甲。攀登 Gunung Ledang 对体力是一大考验，但大家一起完成行程，让每一步都充满意义。在国庆日前共同走进大自然、迎接挑战，将运动、团队精神与对马来西亚的自豪感连接起来。很高兴成为 UTM 大家庭的一员，也期待今后参与更多这样的活动。
Final Year Project Seminar 2025/2026, Semester 2: Wrap-Up
The Final Year Project Seminar on 26 June 2026 brought Semester 2 of the 2025/2026 session to a meaningful close, with students showcasing their project work and sharing what they had learned. It was especially rewarding to see my three students, Leong Cheng Onn, Siti Hajar and Farah Ainin Sofea, present their work. Beyond the final presentations, I value the effort, persistence and learning behind each project. Congratulations to all the students, and thank you to the supervisors, evaluators and organising team.
2025/2026学年第二学期毕业设计研讨会圆满结束
2026年6月26日的毕业设计研讨会，为2025/2026学年第二学期画上了有意义的句号。学生们展示项目成果，分享学习收获。看到我指导的三位学生 Leong Cheng Onn、Siti Hajar 和 Farah Ainin Sofea 展示自己的工作，尤其令人欣慰。除了最后的汇报，我更珍惜每个项目背后的努力、坚持与成长。恭喜所有学生，也感谢各位导师、评审及筹备团队。
A Pleasant Surprise at UTM Citra Karisma 2026
A pleasant surprise and a moment of gratitude! I was honoured to receive the 2025 Excellent Service Award (Anugerah Perkhidmatan Cemerlang, APC) during UTM Citra Karisma 2026, held on 24 September 2026 at Dewan Sultan Iskandar, UTM Johor Bahru. The recognition came with a certificate and an RM1,000 token of appreciation. I genuinely did not expect this award, making it even more meaningful. My heartfelt thanks to JKBSK, the Faculty of Electrical Engineering (FKE), my colleagues, and UTM for their continuous support and encouragement. A special thank you to my wife and family for their patience, understanding and unwavering support throughout the journey. Truly grateful for this recognition. A little encouragement to keep learning, contributing and doing my best.
UTM Citra Karisma 2026：意外的惊喜与肯定
一份意料之外的惊喜，也是一份值得感恩的肯定！我很荣幸于2026年9月24日在马来西亚工艺大学柔佛校区苏丹依斯干达礼堂举行的 UTM Citra Karisma 2026 颁奖典礼上，获颁2025年度卓越服务奖（Anugerah Perkhidmatan Cemerlang，APC）。这项表彰包括证书及1,000令吉的感谢奖励。我确实没有预料到会获奖，因此格外珍惜。衷心感谢生物医学工程与健康科学系（JKBSK）、电气工程学院（FKE）、同事们以及UTM一直以来的支持与鼓励。也特别感谢妻子和家人的耐心、理解与坚定支持。这份荣誉激励我继续学习、贡献，并尽力做好每一件事。
Medibox & Medifly: Bringing Biomedical Ideas to Life
On 25 April 2026, a UTM team of 12 students and four lecturers joined NUMed students and staff for a day of practical biomedical learning at Newcastle University Medicine Malaysia. The Medibox–Medifly programme combined 3D design, printing and drone activities centred on healthcare applications. I led the 3D-printing session, introducing the technology and helping turn participants’ Medibox designs into physical prototypes. The programme continued with drone simulation and a challenge to transport the printed Medibox, bringing engineering, teamwork and healthcare ideas together through shared learning.
Medibox 与 Medifly：让生物医学创意走进实践
2026年4月25日，UTM 的12名学生与4名讲师在马来西亚纽卡斯尔医学院（NUMed），与当地师生开展了一天的生物医学实践活动。Medibox–Medifly 项目将3D设计、打印及无人机活动结合起来，探索医疗领域的应用。我负责3D打印环节，介绍相关技术，并帮助将参与者设计的 Medibox 转化为实体原型。随后，参与者体验无人机模拟操控，并挑战运输打印完成的 Medibox，在共同实践中连接工程、团队协作与医疗创意。
Read the UTM News story
