Publication

Journal Article

Latest 10 Published Articles

(A complete list of publications is available upon request)

  1. M.S. Khan, A, Abdul-Latif, S.S.R. Koloor, M. Petru and M.N. Tamin, “Representative Cell Analysis for Damage-Based Failure Model of Polymer Hexagonal Honeycomb Structure under the Out-of-Plane Loadings,” Polymers, Vol 13(1), 52,2020, pp. 1-23. (IF: 3.426, Q1). https://doi.org/10.3390/polym13010052
  2. M.A. Khattak, S. Zaman, S. Kazi, H. Ahmed, H.M. Habib, H.M. Ali and M.N. Tamin, “Failure Investigation of Welded 430 Stainless Steel Plates for Conveyer Belts,” Engineering Failure Analysis, Vol. 116, Oct 2020, 104754. (IF: 2.897) https://doi.org/10.1016/j.engfailanal.2020.104754
  3. M. Johar, K.J. Wong, S.A. Rashidi and M.N. Tamin, “Effect of Strain Rate and Moisture Content on Mechanical Properties of Adhesively Bonded Joints,” Journal of Mechanical Science and Technology, 30 April 2020, On-line (IF: 0.761). https://doi.org/10.1007/s12206-020-0404-0
  4. F.M. Nor, J.Y. Lim, M.N. Tamin, H.Y. Lee and D. Kurniawan, “Effects of Starter Defect on Energy Release Rate of Three-Point End-Notch Flexure Tested Unidirectional Carbon Fiber Reinforced Polymer Composite,” Polymers, 12(1), 904, 2020, pp. 1-12. (IF: 3.164, Q1) https://doi.org/10.3390/polym12040904
  5. M.S. Khan, S.S.R. Koloor and M.N. Tamin, “Effects of Cell Aspect Ratio and Relative Density on Deformation Response and Failure of Honeycomb Core Structure,” Materials Research Express, 7, 015332, 2020, pp. 1-16. (IF: 1.449) https://doi.org/10.1088/2053-1591/ab6926
  6. S.S.R. Koloor, A. Karimzadeh, N. Yidris, M.R. Ayatollahi, J. Loughlan, and M. N. Tamin, “An Energy-based Concept for Yielding of Multidirectional FRP Composite Structures using a Mesoscale Lamina Damage Model,” Polymers, 12(1), 157, 2020, pp. 1-18. (IF: 3.164, Q1) https://doi.org/10.3390/polym12010157
  7. S. Ahmad, S. Badshah, I.U. Haq, S.A. Malik, M. Amjad and M.N. Tamin, “Numerical Investigation of 1 × 7 Steel Wire Strand under Fretting Fatigue Condition,” Materials, 12(21), 2019, pp. 3463. (IF: 3.057, Q1) https://doi.org/10.3390/ma12213463
  8. A. Karimzadeh, M.R. Ayatollahi, S.S.R. Koloor, A.R. Bushora, M.Y. Yahya and M.N. Tamin, “Assessment of Compressive Mechanical Behavior of Bis-GMA Polymer Using Hyperelastic Models,” Polymers, 11(10), 2019, pp. 1571. (IF: 3.164, Q1) https://doi.org/10.3390/polym11101571
  9. S.S.R. Koloor, M.A. Abdullah, M.N. Tamin, M.R. Ayatollahi, “Fatigue Damage of Cohesive Interfaces in Fiber-Reinforced Polymer Composite Laminates,” Composite Science and Technology, 183, 2019. (IF: 6.309 Q1) https://doi.org/10.1016/j.compscitech.2019.107779
  10. S.S.R. Koloor, S.M. Rahimian-Koloor, A. Karimzadeh, M. Hamdi, M. Petru and M.N. Tamin, “Nano-Level Damage Characterization of Graphene/Polymer Cohesive Interface under Tensile Separation,” Polymers, 11(9), 2019, pp. 1435. (IF: 3.164, Q1) https://doi.org/10.3390/polym11091435

Research Book

Mohd Nasir Tamin and Norhashimah Mohd Shaffiar, Solder Joint Reliability Assessment – Finite Element Simulation Methodology, Advanced Structured Materials Series, Vol 37, Springer, May 2014 (ISBN 978-3-319-00091-6) https://www.springer.com/gp/book/9783319000916

Book Chapter

  1. Aspect of Modeling the Mechanics of Solder/Intermetallic Interface Fracture Process in Solder Interconnects, M.N. Tamin and N. Kamsah, in Advances in Applied Numerical Methods, N.M. Ghazali and N.A.C. Sidik (eds.), Penerbit UTM, 2007.
  2. Evolution Characteristics of Delamination Damage in CFRP Composites under Transverse Loading,” S.S.R. Koloor, A. Abdul-Latif, X.J. Gong and M.N. Tamin, in Chapter 6, Damage and Fracture of Composite Materials and Structures, M.N. Tamin, Ed., Springer, 2012.
  3. Moisture Absorption Effects on the Resistance to Interlaminar Fracture of Woven Glass/Epoxy Composites Laminates,” X.J. Gong, K.J. Wong and M.N. Tamin, in Chapter 9, Damage and Fracture of Composite Materials and Structures, M.N. Tamin, Ed., Springer, 2012.
  4. Fatigue Fracture Process of Lead-Free Solder Joints in BGA Package, M.N. Tamin and N.M. Shaffiar, in Recent Trends in Fracture Mechanics, Y. Prawoto, Ed., NOVA, 2012, (ISNB 978-1-61470-615-1)
  5. Experimental and Numerical Studies of Fiber Metal Laminate (FML) Thin-walled Tubes under Impact Loading, Z. Ahmad, M.R. Abdullah, M.N. Tamin in Mechanical and Materials Engineering of Modern Structure and Component Design, Springer, 2015, pp. 433-443. DOI 10.1007/978-3-319-19443-1_35
  6. Repairability of Carbon/Epoxy Composite Laminate, K.J Wong, X.J. Gong, S. Aivazzadeh and M.N. Tamin, in Chapter 2, Engineering Materials for Specific Applications – Mechanical Properties, Z. Ahmad, Ed., Penerbit UTM Press, 2016, (ISBN 978-983-52-1239-0)
  7. Effect of Absorbed Hydrogen and Thermal Aging on Crack Tip, M.A. Khattak and M.N. Tamin, in Chapter 5, Engineering Materials for Specific Applications – Mechanical Properties, Z. Ahmad, Ed., Penerbit UTM Press, 2016, (ISBN 978-983-52-1239-0)
  8. Failure Analysis of a Mechanical Pump Shaft, M.N. Tamin and M.A. Hamzah, in Chapter1, Failure
    Analysis and Prevention, INTECH OPEN, 2017,pp. 1-14. DOI: 10.5772/intechopen.70672.
  9. Mixed-Mode Delamination Failures of Quasi-Isotropic Quasi-Homogeneous Carbon/Epoxy Laminated Composite, M. Johar, K.J. Wong and M.N. Tamin, in Chapter 3, Failure Analysis and Prevention, INTECH OPEN, 2017, pp. 33-45, DOI: 10.5772/intechopen.70672.
  10. Delamination Behavior of Carbon/Epoxy Composites, K.J. Wong, X. J. Gong, S. Aivazzadeh and M.N. Tamin, in Chapter 3, Structural Composites: Mechanical Properties and Behaviour, K.J. Wong and Z. Ahmad, Eds., Penerbit UTM Press, 2017, (ISBN 978-983-52-1454-7)
  11. Incremental Fatigue Damage Simulation for Reliability Assessment of Steel Wire Ropes under Fretting Fatigue Conditions, S Ahmad, S Badshah, MF Abdulhamid, HS Kang, AS Kader, MN Tamin, in Safety and Reliability–Safe Societies in a Changing World, CRC Press, 2018, pp. 2193-2200.