PUBLICATIONS | PAPER PRESENTED

THESIS
  1. Mohd Yusof Md Daud, Experimental and Finite Element Investigation of Ultrasonic Metal Forming Application, Ph.D Thesis, University of Glasgow (2006)
  2. Mohd Yusof Md Daud, Study on the Application of Thermal Spray Technique for Abrasion Purposes, M. Sc. (Materials Engineering) Thesis, Universiti Sains Malaysia (2000)
JOURNALS
  1. Mohamad Zaki Hassan, S. M. Sapuan, Zainudin A. Rasid, Ariff Farhan Mohd Nor, Rozzeta Dolah, Mohd Yusof Md Daud, Impact Damage Resistance and Post Impact Tolerance of Optimum Banana-Pseudo Stem, Applied Sciences, Vol.10, 2020, pp 1-23. *(WoS & Scopus)

 

  1. Roslan, S.A., Hassan, M.Z., Rasid, Z.A., Bani, N.A., Sarip, S., Md Daud, M.Y., Muhammad-Sukki, F., Mode I Fracture Toughness of Optimized Alkali-Treated Bambusa Vulgaris Bamboo by Box-Behnken Design, Advances in Material Sciences and Engineering, ICMMPE 2018, 20 pp. 565-575. *(Scopus)

 

  1. S. Ibrahim, M. Z. Hassan, I. Ibrahim, M. H. Ibrahim, M. Y. Daud and N. A. Bani, Life-cycle Assessment on the Highway Street Lantern using Weibull Probability Approach, Journal of Physics: Conference Series, Vol. 1150(01), 2019. *(WoS & Scopus)

 

  1. Khalid, R., Daud, M.Y.M., Jusoh, A., Critical success factors maintenance strategy in industry for technical vocational education training institute, Test and Engineering Management, Vol.81(11-12), 2019, pp. 679-688. *(Scopus)

 

  1. Subramaniam, M. Z. Hassan, M. F. Sadali, I. Ibrahim, M. Y. Daud, S. A. Aziz, N. Samsudin and S. Sarip., Evaluation and Analysis of Noise Pollution in the Manufacturing Industry, Journal of Physics: Conf. Series, Vol. 1150(01), 2019. *(WoS & Scopus)

 

  1. Alagapan, M. Z. Hassan, M. H. Ibrahim, M. Y. Daud, N. A. Bani and R. M. Kutty. Measurement of hazardous personal noise exposure in spice manufacturing industry. Journal of Physics: Conf. Series, Vol. 1150(01), 2019. *(WoS & Scopus)

 

  1. Muhalim, N.A.D., Hassan, M.Z., Daud, Y., Elastic-Plastic Behaviour of Ultrasonic Assisted Compression of Polyvinyl Chloride (PVC) Foam, IOP Conference Series: Materials Science and Engineering, 2018. *(WoS & Scopus)

 

  1. Dzul Hafez Yacob, S. Sarip, M. A. Suhot, M. Z. Hassan, S. A. Aziz, M. Y. Daud, N. A. Bani, M. N. Muhtazaruddin, Critical design factors on performance of car jack lifting operations, Indonesian Journal of Electrical Engineering and Computer, Vol. 12, Issue 2, Nov 2018, pp. 521-526. *(Scopus)

 

  1. Ibrahim, M.H.I.B., Hassan, M.Z.B., Ibrahim, I., Rashidi, A.H.M., Nor, S.F.M., Daud, M.Y.M., Seawater infiltration effect on thermal degradation of fiber reinforced epoxy composites, AIP Conference Proceedings, Vol. 1958 (no. 020006), 2018. *(Scopus)

 

  1. Nur Amanina Damira Binti Muhalim, Mohd Yusof Bin Md Daud, Mohamad Zaki Bin Hassan, Sa’ardin Bin Abdul Aziz, Norazmein Bin Abdul Raman, Shamsul Bin Sarip, Compressive Behaviour and Energy Absorption of Copper Tube under Quasi-Static and Ultrasonic Compression Test, Journal of Mechanical Engineering, Vol. SI 3 (1), 2017, pp. 169-184. *(Scopus)

 

  1. Noor’Ain Zainal Abidin, Mohamad Syazli Fathi, Mohd Yusof Md Daud, Harmi Izzuan Baharum, Exploring Acceptance of Game Based Learning from Malaysian Government Professionals’ Perspectives, European Proceedings of Social and Behavioural Sciences, 2018. *(WoS)

 

 

  1. Noor’Ain Zainal Abidin, Mohamad Syazli Fathi, Mohd Yusof Md Daud, Harmi Izzuan Baharum, Project Practitioners’ Competency in Malaysian Construction Industry, Sains Humanika, Vol. 9, No. 1-4, 2017.

 

  1. Siti Nadia Mohd Bakhori, Mohamad Zaki Hassan, Feiruz Ab’lah , Aadil Nausherwan, Mohd Azlan Suhot, Mohd Yusof Daud, Shamsul Sarip , Zarini Ismail, Noise measurement and awareness at construction site – A Case Study, Journal of Advanced Research Design, Vol. 31, Issue.1 (2017) pp. 9-16.

 

  1. Mohd Yusof Md Daud, Norazmein Abd Raman, Ultrasonic Compaction of Stainless Steel Powder Metallurgy, Materials and Testing of Mechanical Engineering (Book Chapter), Penerbit UTM Press, 2016, pp. 21-32. *(Scopus)

 

  1. Daud, Y., Hassan, M.Z., Sarip, S., Raman, N.A., Jamaludin, K.R., Mechanical properties of quasi-static and ultrasonic compaction of stainless steel powder metallurgy, ARPN Journal of Engineering and Applied Sciences, 2016. *(Scopus)

 

  1. Mohd Z. Shamsudin, Mohd Y. Daud, Mohd. J. A. Mustafa, Mohd. A. Arshad, Romizan Jathin, Mohd. S. D. Mahad, Development and Validation of Work Movement Task Analysis: Part 2, ARPN Journal of Engineering and Applied Sciences, Vol. 11, No. 10, 2016. *(Scopus)

 

  1. Abu Bakar, M.S., Hassan, M.Z., Bakhori, S., Daud. Y, Sarip, S., Ismail, Z., Improvement of universal parts for pick and place machine in semiconductor industry using QFD approach, Journal of Engineering and Applied Sciences, 2016. *(Scopus)

 

  1. Bakhori, M. Z. Hassan, Y. Daud, S. Sarip, N. Rahman, Z. Ismail, S. A. Aziz, Mechanical behavior of Kenaf/Epoxy corrugated sandwich structures, IOP Conference Series: Materials Science and Engineering,  Vol. 100 (1), 2015. *(WoS & Scopus)

 

  1. Abidin, N. Ain, M. S. Fathi, M. Daud, M. Yusof, A Preliminary Study on the Learning Perspective at Malaysia’s Government Technical Department, Applied Mechanics and Materials, 2015. *(Scopus)

 

  1. Shahril Bin Noh, Mohd Yusof Bin Md. Daud, Rosmah Binti Ali, Conceptual framework for development of an instrument to measure students’ CNC machining skill, IEEE International Conference on Teaching and Learning in Computing and Engineering (LATICE 2014), 2014, pp: 182-185. *(Scopus)

 

  1. Daud; N.A. Raman; S.A. Aziz; K.R. Jamaludin, Design of ultrasonic compaction tool for powder metallurgy, Applied Mechanics and Materials, Vol. 465-466, 2014, pp. 1016-1020. *(Scopus)

 

  1. Pang Chee Kong, Yusof Daud, Effectiveness of enterprise resource planning system in supporting the lean manufacturing, Applied Mechanics and Materials., Vol. 315, 2013, pp. 899-904. *(Scopus)

 

  1. Yusof Daud, Khairur Rijal Jamaludin, Jeyanthi Vengatta Raman, Human Factor Issue in Quality Management, Jurnal Teknologi, Vol. 59, 2012, Pg. 35- 308. *(WoS & Scopus)

 

  1. Khairur Rijal Jamaludin, Mohd Shahriman Adenan, Mohd Yusof Md Daud, Norazmein Abd Raman, Delaminating Control on Drilling the Medium Density Fiber Board with Robust Optimization, Jurnal Teknologi, Vol. 59, 2012, pp. 99- 103. *(Scopus)

 

  1. Daud, Y., Lucas, M., Jamaludin, K.R., Finite element modelling in ultrasonic sheet metal forming, Advanced Materials Research, Vol. 445, 2012, pp. 3- 8. *(WoS & Scopus)

 

  1. Jamaludin, K.R., Muhamad, N., Ahmad, S., Ibrahim, M.H.I., Mohd. Nor, N.H., Harun, M.R.B., Md. Daud, M.Y., Optimizing the sintering parameter of metal injection molding compact using robust engineering technique. Advanced Materials Research, Vol. 445, 2012, pp. 357-361. *(Scopus)

 

  1. Daud, Y., Lucas, M., Jamaludin, K.R., Verification of interface friction of radial ultrasonic compression using FE simulation, Journal of Applied Sciences, Vol. 11, Issue. 9, 2011, pp. 1600-1605. *(Scopus)

 

  1. Jamaludin, K.R., Muhamad, N., Ahmad, S., Ibrahim, M.H.I. , Mohd Nor, N.H. , Daud, Y., Injection moulding temperature and powder loading influence to the metal injection moulding (MIM) green compact, Scientific Research and Essays, Vol. 6, Issue. 21, 2011, pp. 4532-4538. *(Scopus)

 

  1. Jamaludin, K.R., Muhamad, N., Rahman, M.N.A., Ahmad, S. , Ibrahim, M.H.I., Nor, N.H.M. , Harun, M.R. , Daud, M.Y.M., Multiple performance optimization for the best metal injection molding green compact, Journal of Applied Sciences, Vol. 11, Issue. 9, 2011, pp. 1663-1667. *(Scopus)

 

  1. Khairur Rijal Jamaludin, Norhamidi Muhamad, M.N.A. Rahman, S. Ahmad, M.H.I. Ibrahim, N.H.M.Nor and M.Y.M. Daud., Application of the Grey-Taguchi Method to the Optimization of Metal Injection Molding (MIM) Process, Key Engineering Materials. Vol. 443, 2010, pp 63-68. *(Scopus)

 

  1. Lucas, M., Daud, Y., A finite element model of ultrasonic extrusion, Journal of Physics: Conference Series, Vol. 181, Issue. 1, 2009. *(WoS & Scopus)

 

  1. Ali, R., Hassan, N. A., Md Daud, M.Y., Information Literacy of Engineering Students: A Case Study, IEEE International Congress on Engineering Education (ICEED2009), Kuala Lumpur, Malaysia, Article number 5490595, 2009, pp.143-147. *(Scopus)

 

  1. Daud, Y., Lucas, M., Chapter 3: Estimation of interface friction during radial ultrasonic compression using finite element modeling, Advances in mechanical, manufacturing and materials engineering, Penerbit UTM, 2008, ISSBN 9789835205637.

 

  1. Daud, Y., Lucas, M., Huang, Z., Modelling the effects of superimposed ultrasonic vibrations on tension and compression tests of aluminium, Journal of Materials Processing Technology, Vol. 18, 2007, pp.179-190. *(WoS & Scopus)

 

  1. Daud, Y., Lucas, M., Huang, Z., Superimposed ultrasonic oscillations in compression tests of aluminium, Ultrasonics, Vol. 44, 2006, pp. 511-515. *( WoS & Scopus)

 

  1. Daud, Y., Lucas, M., Huang, Z., Ultrasonic compression tests on aluminium, Applied Mechanics and Materials, Vol.3-4, 2005, pp.99-104. *(WoS & Scopus)
BOOK CHAPTERS
  1. Mohd Yusof Md Daud, Norazmein Abd Raman, Ultrasonic Compaction of Stainless Steel Powder Metallurgy, Materials and Testing of Mechanical Engineering (Book Chapter), Penerbit UTM Press, 2016, pp. 21-32, ISBN 9789835212468.

 

  1. Daud, Y., Lucas, M., Chapter 3: Estimation of interface friction during radial ultrasonic compression using finite element modeling, Advances in mechanical, manufacturing and materials engineering, Penerbit UTM, 2008, ISSBN 9789835205637.

 

CONFERENCES | SYMPOSIUM | PROCEEDING
  1. Fazarizul Hashidi Muhamad Pauzi, Mohd Yusof Md Daud, Ahmad Yusri Mohamed, A Review of Technology Related Services in Creating Value Proposition for LRT Operator, Proceedings of International Conference on Engineering Business Management (ICEBM2019), August 2019.
  2. Noor’Ain Zainal Abidin, Mohamad Syazli Fathi, Mohd Yusof Md Daud and Harmi Izzuan Baharum, A Game Based Learning for Sustainable Project Management Training: A Preliminary Survey, 1st International Conference on Sustainable Infrastructure And Engineering 2017, Kuala Lumpur, Malaysia, 10 Oct 2017.
  3. A. D. Muhalim, Y. Daud, M. Z. Hassan, S. Sarip, N. A. Raman., S. A. Aziz, Mechanical properties of quasi-static and ultrasonic compression of copper tube, Advanced Processes and Systems in Manufacturing International Conference 2016 (APSIM 2016), Kuala Lumpur, 28- 30 Aug 2016. 
  4. Mohamad Syazli Fathi, Noor’Ain Zainal Abidin, Mohd Yusof Md Daud and Harmi Izzuan Baharum, Project Manager’s Competency: Current Context, International Graduate Conference on Engineering, Science and Humanities (IGCESH 2016), Universiti Teknologi Malaysia, Johor Bahru, Malaysia, 15-17 August 2016.
  5. Mohamad Syazli Fathi, Abdul Karim Mirasa,Shuib Rambat, Dr Siti Uzairiah Tobi,Yusof Daud, Mohd Zulakhmar Zakiyudin, Nor A’ini Rajab, Context-specific information delivery for building maintenance of institutions of higher education in malaysia, NAPREC Conference, Malaysia,  28 September 2016.
  6. Z. Shamsudin, M. Y. M. Daud, Development and Validation of Work Movement Task Analysis: Part 2, International Conference on Mechanical and Manufacturing Engineering 2015 (ICME 2015), Johor, Malaysia, 19-20 Oct 2015.
  7. Y. M. Daud, N. Muhalim, Static and ultrasonic compaction of powder metallurgy, International Conference on Mechanical and Manufacturing Engineering 2015 (ICME 2015), Johor, Malaysia, 19-20 Oct 2015.
  8. Z. Shamsudin, M. Y. Daud, Development and Validation of Work Movement Task Analysis: Part 1 International Conference Innovation Challenges in Multidisciplinary Research & Practice 2014 (ICMRP 2014), Kuala Lumpur Malaysia, 17-18 Dec 2014.
  9. Shahril Bin Noh, Mohd Yusof Bin Md. Daud, Rosmah Binti Ali, Conceptual framework for development of an instrument to measure students’ CNC machining skill, IEEE International Conference on Teaching and Learning in Computing and Engineering (LATICE 2014), 2014.
  10. Shamsul Sarip, Mohamad Zaki Hassan, Norazmein Abdul Raman, Sa’ardin Abdul Aziz, Mohd Yusof Md Daud and Mohd Azman Zainul Abidin, Micro hydro power generation in rural and remote areas: a development of crossflow turbine, National Conference on Royal Belum 2014, Perak, Malaysia, 09-10 Dec 2014. 
  11. Mohamad Syazli Fathi, Noor’Ain Zainal Abidin, Mohd Yusof Md Daud and Harmi Izzuan Baharum, Instilling Good Project Management Culture In Malaysia’s Technical Organizations, The 13th Annual Research Conference on Advancement in Business, Science and Technology, (ARC 2014), Istanbul, Turkey, 2014.
  12. Daud; N.A. Raman; S.A. Aziz; K.R. Jamaludin, Design of ultrasonic compaction tool for powder metallurgy, 4th Mechanical and Manufacturing Engineering (ICME 2013), Bangi-Putrajaya, Malaysia 17-18 Dec 2013.
  13. Pang Chee Kong, Yusof Daud, Effective of enterprise of resource planning system in supporting the lean manufacturing, International of Mechanical & Manufacturing Engineering (ICME 2012), Universiti Tun Hussein Onn Malaysia, 20-21 Nov. 2012.
  14. Mohd Yusof Md Daud, Khairur Rijal Jamaludin, Jeyanthi Vengatta Raman, Case study on the human factor improvement on the quality management in a semiconductor industry, Advanced Processes and Systems in Manufacturing (APSIM 2011), Kuala Lumpur, Malaysia, 2011.
  15. Khairur Rijal Jamaludin, Mohd Shahriman Adenan, Mohd Yusof md Daud, Minimizing delaminating on medium density fiber board by taguchi method, 14th International Conference on Advances in Materials and Processing Technologies (AMPT 2011), Istanbul, Turkey, 2011.
  16. Khairur Rijal Jamaludin, Norhamidi Muhamd, Mohd Bizam Abd Rahman, Sufizar Ahmad, Mohd Halim Irwan Ibrahim, Nor Hafiez Mohd Nor, Mohd Yusof Md Daud, Optimizing the Sintering Parameter of metal Injection Molding Compact Using Robust Engineering Technique, 14th International Conference on Advances in Materials and Processing Technologies (AMPT 2011), Istanbul, Turkey, 2011.
  17. Mohd Yusof Md Daud, Margaret Lucas, Khairur Rijal jamaludin, Finite element modeling in sheet metal forming, 14th International Conference on Advances in Materials and Processing Technologies (AMPT 2011), Istanbul, Turkey, 2011.
  18. Jamaludin, K.R., Muhmad, N., Mohamad Nor, M.N.H., Irwan Ibrahim, M.H., Daud, Y., Design of experiment on the sintering of SS316L gas atomised MIM compact, 4th Malaysian Powder Metallurgy & Malaysian Metallurgical Conference 2010 (MMC 2010), Penang, Malaysia, 2010.
  19. Daud,Y., Lucas, M., Jamaludin, K.R., Anis, S.F., Analysis of surface deformation under static and ultrasonic compression of aluminium, 4th Malaysian Powder Metallurgy & Malaysian Metallurgical Conference 2010 (MMC 2010), Penang, Malaysia, 2010.
  20. Jamaludin, K. R., Rahman, M. N. A., Ahmad, S., Ibrahim., M. H. I., Nor, N. H. M., Harun, M. R., Daud, Y., Multiple performance optimization for the best metal injection molding (MIM) green compact, International Conference on Plant Equipment and Reliability (ICPER 2010), Kuala Lumpur, Malaysia, 2010.
  21. Daud, Y., Lucas, M., Jamaludin, K. R., Verification of Interface Friction of Radial Ultrasonic Compression using FE Simulation, International Conference on Plant Equipment and Reliability (ICPER 2010), Kuala Lumpur, Malaysia, 2010.
  22.  
  23. Ali, R., Hassan, N. A., Md Daud, M.Y., Information Literacy of Engineering Students: A Case Study, IEEE International Congress on Engineering Education (ICEED 2009), Kuala Lumpur, Malaysia, 2009.
  24. Ali, R., Hassan, N. A., Daud, Y., Information and Communications Technology Skills in Engineering Education, International Conference on Engineering and Education in the 21st Century, Kuching, Sarawak, Malaysia, March 2009.
  25. Daud, Y., Finite element modelling of radial ultrasonic compression of aluminium, Malaysian Science and Technology Congress 2008, Kuala Lumpur, December 2008.
  26. Daud, Y., Lucas, M., Longitudinal and radial ultrasonic compression on aluminium under different lubrication conditions, Word Engineering Congress (WEC) 2007, Penang, Malaysia, 5-9 August 2007.
  27. Daud, Y., Lucas, M., Finite element modelling of ultrasonic extrusion, International Congresses on Ultrasonics Merged with Ultrasonics International, Vienna, Austria, April 2007.
  28. Lucas, M., Daud, Y., Huang, Z., Ultrasonic compression tests on aluminium, British Society for Strain Measurement International Conference on Advances in Experimental Mechanics, Southampton, UK, September 2005.
  29. Daud, Y., Lucas, M., Huang, Z., Superimposed ultrasonic oscillations in compression tests of aluminium, World Congress in Ultrasonic Merged with Ultrasonics International, Beijing, China, August-September 2005.
  30. Lucas, M., Daud, Y., Ultrasonic upsetting tests on aluminium, Ultrasonics Industries Association Symposium, Las Vegas, USA, March 2005.
EXPERT REPORTS
  1. S. Hamzah, K.R. Jamaludin, M.Y. Daud, S.K.H.S.A. Bokharey, and S.N.M. Salim, Development of a technopreneurship readiness profiling tool for Industry 4.0, MTDC Research Project, Remanufacturing, Sustainable Production and Enterprise Center (RESPECT), Genichi Taguchi Quality and Sustainability Center, Razak Faculty of Technology and Informatics (formerly known as Razak School), Universiti Teknologi Malaysia (UTM), 2019.
  2. Mohd Yusof Md Daud, Mohamad Zaki Hassan, Shamsul Sarip, Saardin Abdul Aziz, Research-based Foundation of Sustainable Agriculture Entrepreneurship: Close and Open Chicken Coop – A Literature Review, Lembaga Kemajuan Terengganu Tengah (KETENGAH)-UTM, 2019.
  3. Mohamad Syazli Fathi, Abdul Karim Mirasa, Mohd Zulakhmar Zakiyudin, Shuib Rambat, Siti Uzairiah Tobi, Yusof Daud and Nor A‘Ini Rajab, Ontext-Specific Information Delivery for Building Maintenance of Institutions of Higher Education in Malaysia, Agreement no: NAPREC (R&D) 18/12, 2015.
  4. Petron Structural Simulation and Technical analysis Report, Aroma UTM-Petron, 2016.
  5. Kinesthetic Approach to Validate Work Movement Task Analysis Observational, Reserach University Grant Report, 2016
  6. Design of Ultrasonic Horn for Powder Metal Compaction, Razak School Reserach Grant Report, 2014
  7. Simulation of Static and Ultrasonic Compression, SEED Research Grant Report, 2012
  8. Context-Specific Information Delivery for Building Maintenance of Institution of Higher Education In Malaysia, Research Grant Report, NPAREC Eastate Reserch Fund, 2012