International Conferences

  1. Naznin Sultana, Mohammed Rafiq Abdul Kadir, Fadzilah Adibah Abdul Majid & Norsamsiah Muhamad Wahab “In Vitro Degradation of Thin Films and Tissue Engineering Scaffolds based on Biodegradable Polymers.” 2nd International Conference on Biotechnology Engineering (ICBioE 2011)
  2. Mohd Nazri Bajuri & Mohammed Rafiq Abdul Kadir “Biomechanical Analysis on The Effect of Bone Graft of The Wrist After Arthroplasty.” 5th International Conference on Biomedical Engineering, in conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering (APCMBE 2011)
  3. Jamal Kashani, Mohammed Rafiq Abdul Kadir & Zohreh Arabshahi “Finite Element Analysis of Different Ferrule Heights of Endodontically Treated Tooth.” 5th International Conference on Biomedical Engineering, in conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering (APCMBE 2011)
  4. S.S.R. Koloor, Jamal Kashani & Mohammed Rafiq Abdul Kadir “Simulation of Brittle Damage for Fracture Process of Endodontically Treated Tooth.” 5th International Conference on Biomedical Engineering, in conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering (APCMBE 2011)
  5. Mina Alizadeh, Jamal Kashani, Mohammed Rafiq Abdul Kadir & Ali Fallahi “Influence of Cancellous Bone Existence in Human Lumbar Spine: A Finite Element Analysis.” 5th International Conference on Biomedical Engineering, in conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering (APCMBE 2011)
  6. Milad Heidari, Ali Fallahi & Mohammed Rafiq Abdul Kadir “Stress Distribution Analysis on Semi Constrained Elbow Prosthesis During Flexion and Extension Motion.” 5th International Conference on Biomedical Engineering, in conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering (APCMBE 2011)
  7. Aisyah Ahmad Shafi, Mohammed Rafiq Abdul Kadir & Eshamsul Sulaiman “Simulation on the Effects of Dental Implant Threads to the Osseointegration Potential.” IEEE EMBS Conference on Biomedical Engineering & Sciences (IECBES 2010), art. No. 5742232, pp. 221-226.
  8. Vijayajothi Paramasivam, Kanesan Muthusamy & Mohammed Rafiq Abdul Kadir “Application of Computational Fluid Dynamics in Assessing the Hemodynamics in Abdominal Aortic Aneurysms.” IEEE EMBS Conference on Biomedical Engineering & Sciences (IECBES 2010), art. No. 5742194, pp. 32-37.
  9. Mina Alizadeh, Mohammed Rafiq Abdul Kadir & Saturnino Saldanha, “Biomechanical Effects of Short Construct Spine Posterior Fixation, in Thoracolumbar Region with L1 Burst Fracture.” IEEE EMBS Conference on Biomedical Engineering & Sciences (IECBES 2010), art. No. 5742280, pp. 454-459.
  10. Ardiyansyah Syahrom, Mohammed Rafiq Abdul Kadir & Darhaysham Al-Jefri Muslim “Relationship between Morphological Parameters of Cancellous Bone and its Mechanical Properties.” IEEE EMBS Conference on Biomedical Engineering & Sciences (IECBES 2010), art. No. 5742256, pp. 336-340.
  11. Mohd Nazri Bajuri & Mohammed Rafiq Abdul Kadir “Biocomputational Comparative Study of Rheumatoid Arthritis of the Wrist Joint before and after Arthroplasty; Carpal Stability Analysis.” IEEE EMBS Conference on Biomedical Engineering & Sciences (IECBES 2010), art. No. 5742242, pp. 270-275.
  12. Norsamsiah binti Muhamad @ Wahab, Fadzilah Adibah Abdul Majid & Mohammed Rafiq Abdul Kadir “Toxic Element Released from High and Low Carbon CoCrMo Alloy In- Vitro.” IEEE EMBS Conference on Biomedical Engineering & Sciences (IECBES 2010), art. No. 5742224, pp. 180-183.
  13. Fitdriyah Hussain, Mohammed Rafiq Abdul Kadir, Ahmad Hafiz Zulkifly, Azlin Sa’at & Azian Abd. Aziz “Three Dimensional Anthropometric Measurements of the Distal Femur and Proximal Tibia for the Malay Population.” IEEE EMBS Conference on Biomedical Engineering & Sciences (IECBES 2010), art. No. 5742246, pp. 291-294.
  14. Ali Fallahi Arezoodar & Mohammed Rafiq Abdul Kadir “Kinematic Analysis of High Flex knee Implant in Sagittal Plane before Manufacturing Real Prosthesis.” IEEE EMBS Conference on Biomedical Engineering & Sciences (IECBES 2010), art. No. 5742281, pp. 460-465.
  15. Nor Raihanah Abdull Rahim, Mohammed Rafiq Abdul Kadir & Eskandar @ Zulkarnain Hassan “Comparing the Effects of Laminotomy and Hemilaminectomy to the Spinal Segment.” IEEE EMBS Conference on Biomedical Engineering & Sciences (IECBES 2010), art. No. 5742276, pp. 433-437.
  16. Muhammad Ikman Ishak, Mohammed Rafiq Abdul Kadir, Eshamsul Sulaiman & Noor Hayaty Abu Kassim “Effects of Different Zygomatic Implant Body Surface Roughness and Implant Length on Stress Distribution.” IEEE EMBS Conference on Biomedical Engineering & Sciences (IECBES 2010), art. No. 5742230, pp. 210-215.
  17. Syafiqah Saidin, Mohammed Rafiq Abdul Kadir, Eshamsul Sulaiman & Noor Hayaty Abu Kassim “Finite Element Analysis on Internal Hexagonal and Internal Conical Abutment.” IEEE EMBS Conference on Biomedical Engineering & Sciences (IECBES 2010), art. No. 5742231, pp. 216-220.
  18. Raja Mohd Aizat Raja Izaham, Mohammed Rafiq Abdul Kadir & Darhaysham Al-Jefri Muslim “Screws Placement Effect on Locking Compression Plate (LCP) for Tibial Oblique Fracture Fixation.” IEEE EMBS Conference on Biomedical Engineering & Sciences (IECBES 2010), art. No. 5742235, pp. 236-241.
  19. Abdul Halim Abdullah, Nor M.A.M., Saman A.M., Tamin, M.N. & Mohammed Rafiq Abdul Kadir “Effects of Prosthesis Stem Tapers on Stress Distribution of Cemented Hip Arthroplasty.” AIP Conference Proceedings (2010), 1285, pp. 561-575.
  20. S. Izman, Mohammed Rafiq Abdul Kadir, Mahmood Anwar, E.M. Nazim, E.K. Khor & M. Konneh, “Effect of Pickling and Mechanical Surface Treatment Methods on Adhesion Strength of Ti Oxide Layer Formed on Titanium Alloy Substrate.” 34th International Electronic Manufacturing Technology Conference, 2010.
  21. Mohd Yusof Baharuddin & Mohammed Rafiq Abdul Kadir, “Finite Element Study on the Micromotion of Cementless Total Hip Arthroplasty.” IFMBE Proceedings, 31 IFMBE, pp. 605-607, 2010.
  22. Mohd Yusof Baharuddin & Mohammed Rafiq Abdul Kadir, “Finite Element Study on the Stability of Cementless Acetabular Cup.” IFMBE Proceedings, 31 IFMBE, pp. 601-604, 2010.
  23. Ishkrizat Taib, Kahar Osman, Mohammed Rafiq Abdul Kadir & Mohd H. Padzillah, “Risk of Rupture Analysis for Advanced Level of AAA Under Combined Physiological and Physical Conditions.” 2nd International Conference on Biomedical and Pharmaceutical Engineering, ICBPE 2009, Conference Proceedings art. No. 5384089.
  24. Badreddin G.S.K., Kahar Osman & Mohammed Rafiq Abdul Kadir, “Numerical Modelling of Fusiform Aneurysm with High and Normal Blood Pressure.” 3rd Asia International Conference on Modelling and Simulation, AMS 2009, art. No. 5071995, pp. 270-275.
  25. Mohammed Rafiq Abdul Kadir, Kahar Osman & Ahmad Ihsan Zainudin, “The Use of Mechanical Interlock in Dental Prosthesis.” 4th International Conference on Biomedical Engineering, IFMBE Proceedings, 21 IFMBE (1), pp. 457-460, 2008.
  26. Mohammed Rafiq Abdul Kadir, Nazri Kamsah & Zaliha Aziz, “Eccentric Loading on the Tibial Plate After Knee Replacement.” 4th International Conference on Biomedical Engineering, IFMBE Proceedings, 21 IFMBE (1), pp. 403-406, 2008.
  27. Mohammed Rafiq Abdul Kadir, Nazri Kamsah & Mohd Azuwan Aminullah, “Finite Element Study of Metacarpophalangeal Joint Silicone Implants.” 4th International Conference on Biomedical Engineering, IFMBE Proceedings, 21 IFMBE (1), pp. 420-423, 2008.
  28. Mohammed Rafiq Abdul Kadir, Nazri Kamsah & Norhayanti Mohlisun, “Interface Micromotion of Cementless Hip Arthroplasty: Collared vs Non-collared Stems.” 4th International Conference on Biomedical Engineering, IFMBE Proceedings, 21 IFMBE (1), pp. 428-432, 2008.
  29. Mohammed Rafiq Abdul Kadir, Nazri Kamsah & Hakimah Shabudin, “Stability of Talus Component in Total Ankle Arthroplasty.” 4th International Conference on Biomedical Engineering, IFMBE Proceedings, 21 IFMBE (1), pp. 453-456, 2008.
  30. Mohammed Rafiq Abdul Kadir, Habibollah Haron, Nazri Kamsah & Norazhar Nordin, “Miniplates Orientation for Fracture Fixation of the Mandibular Condyle.” 4th International Conference on Biomedical Engineering, IFMBE Proceedings, 21 IFMBE (1), pp. 438-441, 2008.
  31. Mohammed Rafiq Abdul Kadir, Ishkrizat Taib, Kahar Osman & Mohd Hafiz Abdul Hamid, “Blood Flow Simulation of Stented Aneurysm Model.” 4th International Conference on Biomedical Engineering, IFMBE Proceedings, 21 IFMBE (1), pp. 398-402, 2008.
  32. Mohammed Rafiq Abdul Kadir, Nazri Kamsah & Muhsin Salim, “Effect of Metal backed Geometry on the Stability of Cementless Acetabular Cup.” 4th International Conference on Biomedical Engineering, IFMBE Proceedings, 21 IFMBE (1), pp. 410-413, 2008.
  33. Mohammed Rafiq Abdul Kadir, Ardiyansyah Syahrom, Mohd Azrul Rais Yusof & Nazri Kamsah, “Micro-modeling and Analysis of Actual and Idealised Cancellous Structure.” 4th International Conference on Biomedical Engineering, IFMBE Proceedings, 21 IFMBE (1), pp. 433-437, 2008.