Undergraduate Final Year Projects

  1. Alhamzee bin Idrose, “Comparison between conventional and reversed shoulder implant for total shoulder arthroplasty.” 2007-2008.
  2. Corolyn @ Norsafikah bt. Jamli, “Electrochemical study of Ti-6Al-4V and 316L under Simulated Bodily Fluid.” 2007-2008.
  3. Mohd Fairoz bin Saharudin, “Stress Analysis of the joint in-constrained and Semi-constrained total elbow implants.” 2007-2008.
  4. Mohd Imran bin Rosly, “Modeling Flow stream of blood due to abdominal aortic aneurysm.” 2007-2008.
  5. Nur Syahirah bt. Mohd Shah, “Electrochemical study of Co-Cr-Mo and 304SS under simulated body fluid.” 2007-2008.
  6. Wan Mohd Musyris b. Wan Harujan, “Modelling and Biomechanical analysis of Human Vertebral Column with emphasis on the intervertebral Disc (IVD).” 2007-2008.
  7. Stephanie Clarence Mannie, “Development of Human Joint Simulator for joint tribological study”. 2007-2008.
  8. Hakimah bt. Sabudin, “Micromotion and Stability of Single Fin and Double Fin Total Ankle Replacement”. 2007-2008.
  9. Zaliha bt. Aziz, “Defect of a Medial Condyle: Design and Analyses of a Unicompartmental Artificial Knee”. 2007-2008
  10. Norhayati Mohlisun, “Interface Micromotion failure simulation on cementless hip arthroplasty”. 2007-2008
  11. Ahmad Ihsan bin Zainuddin, “Mechanical Interlocking Mechanism Between the Abutment Set and the Dental Implant Body”. 2007-2008
  12. Mohd Azrul Rais Yusof, “Human Cancellous Bone as a Structure for Stem Cell: Micro modeling and Analysis”. 2007-2008
  13. Muhd Hafiz b. Abdul Hamid, “Effects of varying stent geometry on its expansion behaviour using finite element method”. 2007-2008
  14. Norazhar b. Nordin, “Numerical Analysis of Plates and Screw System for Fracture Fixation of the Mandible”. 2007-2008
  15. Muhsin bin Salim, “Stability of Acetabular Cup for Osseointegration”. 2007-2008
  16. Muhammad Azuwan bin Aminullah, “Design and Analysis of Metacarpophalangeal Joints to Relieve Pain due to Osteoarthritis”. 2007-2008
  17. Eunice Chung Siaw Kiat “Design and analysis of a cemented hip prostheses.” 2006-2007.
  18. Mohd Hafizuddin bin M Marzuki “Design and Analysis of a unicompartmental Knee implant for osteoarthritic patient”. 2007-2008.
  19. Mohd Norshahid b. Mohd Idris “Mechanical Interlocking mechanism of Prototype Dental Implant Body.” 2005-2006.
  20. Faisal Abidin Lee, “Design & Analysis of Total Shoulder Arthroplasty.” 2006-2007.
  21. Jamillah Amer Nordin, “Corrosion Behaviour of Ti6V4Al in Simulated Body Fluid.” 2006-2007.
  22. Noraida Mohd Hussin, “A Study of Microstructure & Mechanical properties of Boiler Tube in Palm Oil.” 2006-2007.
  23. Muhammad Hafiz bin Abdullah, “Design of an Elbow Prosthesis for Total Elbow Replacement.” 2006-2007.
  24. Mohd Rizali bin Abdullah, “Kesan Kekasaran Permukaan ke atas Kekerasan Permukaan Pada Keluli Yang Melalui Proses Pengaluminan.” 2005-2006.
  25. Norsuraya bt. Mohd Yusuf, “Improving Mechanical Properties of Brass Used as a Key.” 2006-2007.
  26. Abdul Hafiz bin Yusuf “Kajian Kesan Bahan Pengikat Dalam Pengeluaran Produk Seramik.” 2005-2006.
  27. Timothy Thomas “Micromotion and stability of Single Fin Total Ankle Replacement.” 2007-2008.
  28. Nor Hidayat Tay bin Khairul Azmi Tay “Mobile Bearing For the treatment of Osteorthritic of the knee.” 2008-2009
  29. Mohd Azali Azmir “ The Effect of Press Fit on osseointegration of acetebular cup.” 2008-2009
  30. Nor Raihanah Abdull Rahim “Design and analysis of Metacarpophalangeal implants to relieve pain due to osteoarthritis.” 2008-2009.
  31.  Siti Nur Shazleena binti Baharom “Effect of varying stent geometry on its expansion behaviour using finite element method.” 2008-2009.
  32. Tang Yong Cang “Design and development of a mechanical system for new tribometer.” 2008-2009.
  33. Choo Che How “Modification and Manufacture of an existing Tribometer for Wear Analysis of Artificial Human Joint.” 2008-2009.
  34. Ahmad Zazily bin Abdul Aziz “Knee Joint Tribo-Simulator” 2009-2010.
  35. Sim Jia Siang “Developing A Miniaturize human hip joint simulator for joint tribological study” 2009-2010.
  36. Mohammad Fathi bin Halim “Wrist Joint Tribo-Simulator” 2009-2010.
  37. Muhammad Firdaus bin Zakaria “Elbow Joint Tribo Simulator” 2009-2010.
  38. Muhamad Syafiq bin Sulaiman “Ankle Joint Tribo Simulator” 2009-2010.
  39. Mohd Faiz bin Mohd Yusoff “Design and Analysis of Mechanical Interlock in Prosthetic Dentistry” 2009-2010.
  40. Wan Nur Afiza binti Wan Anuar “Biomechanical Evaluation of Temporomandibular Joint Implant” 2009-2010.
  41. Noor Hidayah bin Amir Hassan “Comparative Study of Implant for Total and Partial Knee Replacement” 2009-2010.
  42. Muhammad Lutfi bin Idris “Biomechanical Analysis of Locking Compression Plate in Oblique Tibial Fracture” 2009-2010.
  43. Khairul Shahri bin Abdul Rokib “Design and Analysis of Implant for Total Elbow Replacement” 2009-2010.
  44. Yeoh Swee Aik “Finite Element Analysis of Lumbar with Total Disc Arthroplasty” 2009-2010.
  45. Loy Heng Chen “Design and Analysis of a Human Knee Joint Simulator” 2009-2010.
  46. Amirul Hakim bin Rahim “Design and Analysis of a Human Spine Simulator” 2009-2010.
  47. Mohd Azley bin Mat Saat “Design and Analysis of a Human Wrist Joint Simulator” 2009-2010.
  48. Muhammad Safuan bin Husin “Design and Analysis of a Human Elbow Joint Simulator” 2009-2010.
  49. Wong Leong Ping “Design and Analysis of a Human Shoulder Joint Simulator” 2009-2010.
  50. Ong Kheng Chuan “Biomechanical Analysis of Dental Implant with Mechanical Interlock” 2009-2010.
  51. Tan Wee Yee “Design and Analysis of a Human Hip Joint Simulator” 2009-2010.