ISI Journals

Al-Alaq 4

  • Total Q1 Journals: 45
  • Total Q2 Journals: 42
  • Total Q3 Journals: 20
  • Total Q4 Journals: 13
  • Total Impact Factor: 240.798
  1. Shahrouz Zamani Khalajabadi, Mohammed Rafiq Abdul Kadir, Izman Sudin & Mohsen Marvibaigi, “The effect of MgO on the biodegradation properties and biocompatibility of a Mg/HA/MgO nanocomposite manufactured by powder metallurgy method” Journal of Alloys and Compounds (ISI, Q1, Impact Factor: 3.014), Vol. 655, pg. 266-280, 2016. 
  2. Fatihhi Szali Januddi, Rabiatul Adibah Abdul Rahim, Muhammad Noor Harun, Mohammed Rafiq Abdul Kadir, Tunku Kamarul & Ardiyansyah Syahrom, “Effect of Torsional Loading on Compressive Fatigue Behaviour of Trabecular Bone” Journal of the Mechanical Behavior of Biomedical Materials (ISI, Q1, Impact Factor: 2.876), Vol. 54, pg. 21-32, 2016.
  3. Zahra Rezai, Ali Selamat, Mohd Shafry Mohd Rahim & Mohammed Rafiq Abdul Kadir, “Automatic Plaque Segmentation based on hybrid Fuzzy Clustering and k Nearest Neighborhood using Virtual Histology Intravascular Ultrasound Images” Applied Soft Computing (ISI, Q1, Impact Factor: 2.857), accepted, in-press, 2016.
  4. Nida Iqbal, Mohammed Rafiq Abdul Kadir, Saman Iqbal, Saiful Izwan Abdul Razak, M Shahid Rafique, Hamidreza Bakhsheshi-Rad, Hanumantharao Balaji Raghavendran & Azlina Amir Abbas, “Nano-hydroxyapatite reinforced zeolite ZSM composites: A comprehensive study on the structural and in vitro biological properties” Ceramics International (ISI, Q1, Impact Factor: 2.758), accepted, in-press, 2016.
  5. Norjihada Izzah, Mohammed Rafiq Abdul Kadir, Nasrul Humaimi Mahmood, Om Prakash Singh, Nida Iqbal & Razauden Mohd Zulkifli, “Apini and Meliponini foraging activities influence the phenolic content of different types of Malaysian honey“ Journal of Apicultural Research (ISI, Q1, Impact Factor: 2.084), accepted, in-press, 2016.
  6. Saiful Izwan Abdul Razak, Izzati Fatimah Wahab, Mohammed Rafiq Abdul Kadir, Ahmad Zahran Mohd Khudzari, Abdul Halim Mohd Yusof, Farah Nurujannah Dahli, Nadirul Hasraf Mat Nayan & T. Joseph Sahaya Anand, “Biomimetic Growth of Hydroxyapatite on Kenaf Fibers” Bioresources (ISI, Q1, Impact Factor: 1.334), Vol. 11(1), 1971-1981, 2016.
  7. Hamidreza Bakhsheshi-Rad, Esah Hamzah, M. Kasiri-Asgarani, S. Jabbarzare, Nida Iqbal & Mohammed Rafiq Abdul Kadir,“Deposition of nanostructured fluorine-doped hydroxyapatite–polycaprolactone duplex coating to enhance the mechanical properties and corrosion resistance of Mg alloy for Biomedical Applications“ Materials Science and Engineering C (ISI, Q2, Impact Factor: 3.420), Vol. 60, 526-537, 2016.
  8. Sornambikai Sundaram, Kasi Marimuthu, Lim Qing Hin & Mohammed Rafiq Abdul Kadir, “Fish embryo toxicity assessment of o-dianisidine in Clarias gariepinus and its electrochemical treatment in aquatic samples using super conductive carbon black“ RSC Advances (ISI, Q2, Impact Factor: 3.289), accepted, in-press, 2016.
  9. Tham Weng Hong, Mat Uzir Wahit, Mohammed Rafiq Abdul Kadir, Wong Tuck Whye & Onn Hassan,“Polyol-based biodegradable polyesters: a short review“ Reviews in Chemical Engineering (ISI, Q2, Impact Factor: 2.163), Vol. 32, 201-221, 2016.
  10. Abdul Hadi Abdul Wahab, Mohammed Rafiq Abdul Kadir, Tunku Kamarul & Ardiyansyah Syahrom,“Number of Pegs Influence Focal Stress Distributions and Micromotion in Glenoid Implant: A Finite Element Study“ Medical & Biological Engineering & Computing (ISI, Q2, Impact Factor: 1.797), accepted, in-press, 2016.
  11. Saiful Izwan Abdul Razak, Hassan Adeli, Farah Dahli, Mohammed Rafiq Abdul Kadir & Abdul Halim Mohd Yusof, “Conductive Polylactic Acid/Polyaniline Porous Scaffold via Freeze Extraction for Potential Biomedical Applications“ Soft Materials (ISI, Q3, Impact Factor: 1.333), accepted, in-press, 2016.
  12. Muhammad Ikman Ishak, Aishah Shafi, Mohammed Rafiq Abdul Kadir & Eshamsul Sulaiman, “Effect of Ferrule Height and Post Length on Mechanical Stress and Displacement of Endodontically Treated Maxillary Central Incisor – A Finite Element Analysis“ Journal of Medical and Biological Engineering (ISI, Q3, Impact Factor: 1.018), accepted, in-press, 2016.
  13. Noor Jasmawati, Fatihhi Szali Januddi, Amir Putra Md Saad, Ardiyansyah Syahrom, Muhammad Noor Harun, Mohammed Rafiq Abdul Kadir & Andreas Oschner, “Mg-based Porous Metals as Cancellous Bone Analogous Material: A Review” Journal of Materials: Design and Applications (ISI, Q4, Impact Factor: 0.793), accepted, in-press, 2016.
  14. Abdul Hakim Md Yusop, Nurizzati Mohd Daud, Hadi Nur, Mohammed Rafiq Abdul Kadir & Hendra Hermawan, “Controlling the degradation kinetics of porous iron by poly(lactic-co-glycolic acid) infiltration for use as temporary medical implants” Nature Scientific Report (ISI, Q1, Impact Factor: 5.228), accepted, in-press, 2015.
  15. Mohammad Mahdi Taheri, Mohammed Rafiq Abdul Kadir, Tolou Shokuhfar, Azhang Hamlekhan, Mostafa Rezazadeh Shirdar & Farnaz Naghizadeh, “Fluoridated hydroxyapatite nanorods as novel fillers for improving mechanical properties of dental composite: Synthesis and application” Materials & Design (ISI, Q1, Impact Factor: 3.997), Vol. 82, pg. 119-125, 2015.
  16. Shahrouz Zamani Khalajabadi, Mohammed Rafiq Abdul Kadir, Izman Sudin & Reza Ebrahimi-Kahrizsangi, “Fabrication, bio-corrosion behavior and mechanical properties of a Mg/HA/MgO nanocomposite for biomedical applications” Materials & Design (ISI, Q1, Impact Factor: 3.997), Vol. 88, pg. 1223-1233, 2015.
  17. Muhammad Ruslan Abdullah, Amirhossein Goharian, Mohammed Rafiq Abdul Kadir & Mat Uzir Wahit, “Biomechanical and bioactivity concepts of polyetheretherketone composites for use in orthopaedic implants – a review“ Journal of Biomedical Materials Research Part A (ISI, Q1, Impact Factor: 3.263), accepted, in-press, 2015.
  18. Norhidayu Mohd Zain, Rafaqat Hussain & Mohammed Rafiq Abdul Kadir, “Quinone-Rich Polydopamine Functionalization of Yttria Stabilized Zirconia for Apatite Biomineralization: The Effects of Coating Temperature“ Applied Surface Science (ISI, Q1, Impact Factor: 3.150, Vol. 346, pg. 317-328, 2015.
  19. Shahrouz Zamani Khalajabadi, Mohammed Rafiq Abdul Kadir, Izman Sudin & Mohd Zamri Mohd Yusop, “Facile fabrication of hydrophobic surfaces on mechanically alloyed-Mg/HA/TiO2/MgO bionanocomposites“ Applied Surface Science (ISI, Q1, Impact Factor: 3.150), Vol. 324, pg. 380-392, 2015.
  20. Hamidreza Bakhsheshi-Rad, Esah Hamzah, Ahmad Fauzi Ismail, Z Sharer, Mohammed Rafiq Abdul Kadir & M. Daroonparvar, “Synthesis and corrosion behavior of a hybrid bioceramic-biopolymer coating on biodegradable Mg alloy for orthopaedic implants” Journal of Alloys and Compounds (ISI, Q1, Impact Factor: 3.014), Vol. 648, pg. 1067-1071, 2015.
  21. Ammar Z Alshemary, Muhammad Akram, Goh Yi Fan, Mohammed Rafiq Abdul Kadir, Ahmad Abdollahi & Rafaqat Hussain, “Structural characterization, optical properties and in vitro bioactivity of mesoporous erbium-doped hydroxyapatite” Journal of Alloys and Compounds (ISI, Q1, Impact Factor: 3.014), Vol. 645, pg. 478-486, 2015.
  22. Fatihhi SJ, Muhammad Noor Harun, Mohammed Rafiq Abdul Kadir, Jaafar Abdullah, Tunku Kamarul, Andreas Oschner & Ardiyansyah Syahrom, “Uniaxial and Multiaxial Fatigue Life Prediction of the Trabecular Bone Based on Physiological Loading: A Comparative Study“ Annals of Biomedical Engineering (ISI, Q1, Impact Factor: 2.887), Vol. 43, pg. 2487-2502, 2015.
  23. Nida Iqbal Khan, Mohammed Rafiq Abdul Kadir, Nasrul Humaimi Mahmood, Saman Iqbal, Hanumantha Rao Balaji & Tunku Kamarul, “Characterization and Biological Evaluation of Silver Containing Fluoroapatite Nanoparticles Prepared through Microwave Synthesis“ Ceramics International (ISI, Q1, Impact Factor: 2.758), Vol. 41, pg. 6470-6477, 2015.
  24. Mohammad Mahdi Taheri, Mohammed Rafiq Abdul Kadir, Tolou Shokuhfar, Mahtab Assadian, Mostafa Rezazadeh Shirdar & Abolfazl Mirjalili, “Surfactant-Assisted Hydrothermal Synthesis of Fluoridated Hydroxyapatite Nanorods” Ceramics International (ISI, Q1, Impact Factor: 2.758), Vol. 41, pg. 9867-9872, 2015.
  25. Shahrouz Zamani Khalajabadi, Mohammed Rafiq Abdul Kadir, Izman Sudin, Alireza Samavati & Zulkafli Othaman, “Synthesis, microstructure and biodegradation behavior of nano-Si and nano-ZnO/Si coatings on a Mg/HA/TiO2/MgO nanocomposite” Ceramics International (ISI, Q1, Impact Factor: 2.758), Vol. 41, pg. 11346-11358, 2015.
  26. Shahrouz Zamani Khalajabadi, Mohammed Rafiq Abdul Kadir, Izman Sudin & Masoud Kasiri-Asgarani, “Microstructural characterization, biocorrosion evaluation and mechanical properties of nanostructured ZnO and Si/ZnO coated Mg/HA/TiO2/MgO nanocomposites” Surface & Coatings Technology (ISI, Q2, Impact Factor: 2.139), Vol. 277, pg. 30-43, 2015.
  27. Hamidreza Bakhsheshirad, Esah Hamzah, Mohammed Rafiq Abdul Kadir, Mohammad Daroonparvar & Mamoun Medraj, “Enhancement of corrosion resistance and mechanical properties of Mg-1.2Ca-2Bi via a hybrid silicon-biopolymer coating system” Surface & Coatings Technology (ISI, Q2, Impact Factor: 2.139), accepted, in-press, 2015.
  28. Farnaz Naghizadeh, Mohammed Rafiq Abdul Kadir, Ali Doostmohammadi, Fatemeh Roozbahani, Nida Iqbal, Mohammad Mahdi Taheri, Sangeetha Naveen & Tunku Kamarul, “Rice Husk Derived Bioactive Glass-Ceramic as a Functional Bioceramic: Synthesis, Characterisation and Biological Testing” Journal of Non-Crystalline Solids (ISI, Q1, Impact Factor: 1.825), Vol. 427, pg. 54-61, 2015.
  29. Nida Iqbal, Kashif Ijaz, Muniza Zahid, Abdul S Khan, Mohammed Rafiq Abdul Kadir, Rafaqat Hussain, Anis-ur-Rehman, Jawwad A Darr, Ihtesham-ur-Rehman & Aqif A Chaudhry, “Microwave Assisted Synthesis and Characterization of Magnesium Substituted Calcium Phosphate Bioceramics” Materials Science and Engineering C (ISI, Q2, Impact Factor: 3.420), Vol. 56, pg. 286-293, 2015.
  30. Sornambikai Sundaram, Madhanagopal Jagannathan, Mohammed Rafiq Abdul Kadir, Palanivel Sathishkumar, Tony Hadibarata & Abdull Rahim Mohammed Yusoff, “A new electro-generated o-dianisidine enone derivative stabilized MWCNT modified glassy carbon electrode for electro-analytical application” RSC Advances (ISI, Q2, Impact Factor: 3.289), Vol. 5, pg. 45996-46006, 2015.
  31. Mohd Faaizie Darmawan, Suhaila Mohd Yusof, Mohammed Rafiq Abdul Kadir & Habibollah Haron, “Comparison on three classification techniques for sex estimation from the bone length of Asian children below 19 years old: an analysis using different group of ages” Forensic Science International (ISI, Q2, Impact Factor: 1.950), Vol. 247, pg. 130 e1-11, 2015.
  32. Nasrul Hadi Johari, Kahar Osman, Nor Harris Nor Helmi & Mohammed Rafiq Abdul Kadir, “Comparative Analysis of Realistic CT-Scan and Simplified Human Airway Models in Airflow Simulation” Computer Methods in Biomechanics and Biomedical Engineering (ISI, Q2, Impact Factor: 1.850), Vol. 18, pg. 48-56, 2015.
  33. Ammar Z Alshemary, Goh Yi Fan, Muhammad Akram, Mohammed Rafiq Abdul Kadir & Rafaqat Hussain, “Barium and Fluorine Doped Synthetic Hydroxyapatite: Characterization and In-Vitro Bioactivity Analysis” Science of Advanced Materials (ISI, Q2, Impact Factor: 1.812), Vol. 7, pg. 249-257, 2015.
  34. Mohammad Mahdi Taheri, Mohammed Rafiq Abdul Kadir, Noor Kamila Ahmad Shafiai, Tolou Shokuhfar, Mahtab Assadian & Mostafa Rezazadeh Shirdar, “Green Synthesis of Silver Nanoneedles using Shallot and ATG” Transactions of Nonferrous Metals Society of China (ISI, Q2, Impact Factor: 1.340), Vol. 25, pg. 3286-3290, 2015.
  35. Ardiyansyah Syahrom, Mohammed Rafiq Abdul Kadir, Muhammad Noor Harun & Andreas Oschner, “Permeability Study of Cancellous Bone and its Idealised Structures“ Medical Engineering & Physics (ISI, Q3, Impact Factor: 1.619), Vol. 37, pg. 77-86, 2015.
  36. Mostafa Rezazadeh Shirdar, Izman Sudin, Mohammad Mahdi Taheri, Ali Keyvanfar, Mohd Zamri Mohd Yusop & Mohammed Rafiq Abdul Kadir, “A Novel Hydroxyapatite Composite Reinforced with Titanium Nanotubes Coated on Co-Cr-based Alloy” Vacuum (ISI, Q3, Impact Factor: 1.558), Vol. 122, pg. 82-89, 2015.
  37. Hamidreza Bakhsheshirad, Esah Hamzah, Mohammed Rafiq Abdul Kadir, Mohammad Daroonparvar & Mamoun Medraj, “Corrosion and mechanical performance of double-layered nano-Al/PCL coating on Mg-Ca-Bi alloy” Vacuum (ISI, Q3, Impact Factor: 1.558), Vol. 119, pg. 95-98, 2015.
  38. Mohd Faaizie Darmawan, Suhaila Mohd Yusof, Mohammed Rafiq Abdul Kadir & Habibollah Haron, “Age estimation based on bone length using 12 regression models of left hand x-ray images for Asian Children below 19 years old“ Legal Medicine (ISI, Q3, Impact Factor: 1.442), Vol. 17(2), pg. 71-78, 2015.
  39. Mahtab Assadian, Mostafa Rezazadeh Shirdar, Mohd Hasbullah Idris, Izman Sudin, Davood Almasi, Mohammad Mahdi Taheri & Mohammed Rafiq Abdul Kadir, “Optimisation of electrophoretic deposition parameters in coating of metallic substrate by hydroxyapatite using response surface methodology” Arabian Journal for Science and Engineering (ISI, Q3, Impact Factor: 0.728), Vol. 40, pg. 923-933, 2015.
  40. Mostafa Rezazadeh Shirdar, Izman Sudin & Mohammed Rafiq Abdul Kadir, “Effect of post-treatment techniques on corrosion and wettability of HA coated Co-Cr-Mo alloy” Arabian Journal for Science and Engineering (ISI, Q3, Impact Factor: 0.728), Vol. 40, pg. 1197-1203, 2015.
  41. Mostafa Rezazadeh Shirdar, Izman Sudin & Mohammed Rafiq Abdul Kadir, “Effect of electrophoretic deposition parameters on the corrosion behavior of HA coated cobalt chromium using response surface methodology” Arabian Journal for Science and Engineering (ISI, Q3, Impact Factor: 0.728), Vol. 41, pg. 591-598, 2015.
  42. Maya Genisa, Zainul Ahmad Rajion, Dasmawati Mohamad, Abdullah Pohchi, Mohammed Rafiq Abdul Kadir & Solehuddin Shuib, “Effect of Different Angle Scanning on Density Estimation Based on Hounsfield Unit on CT and CBCT“ Sains Malaysiana (ISI, Q3, Impact Factor: 0.350), Vol. 44, pg. 1331-1337, 2015.
  43. Hamidreza Bakhsheshi-Rad, Mohd Hasullah Idris, Mohammed Rafiq Abdul Kadir, Ali Ourdjini, M. Medraj & M. Daroonparvar, “Mechanical and Bio-corrosion Properties of Quarternary Mg-Ca-Mn-Zn Alloys Compared with Binary Mg-Ca Alloys” Materials and Design (ISI, Q1, Impact Factor: 3.501), Vol. 53, pg. 283-292, 2014.
  44. Ali Fallahi Arezoodar, Mohammed Rafiq Abdul Kadir, Mina Alizadeh, Sangeetha Naveen & Tunku Kamarul, “Geometric variable designs of Cam/Post Mechanisms influence the kinematics of Knee Implants” Knee Surgery, Sports Traumatology, Arthroscopy (ISI, Q1, Impact Factor: 3.053), Vol. 22, pg. 3019-3027, 2014.
  45. Davood Almasi, Izman Sudin, Mahtab Assadian, Mohammad Ghanbari & Mohammed Rafiq Abdul Kadir, “HA Coating on PEEK via Chemical Deposition“ Applied Surface Science (ISI, Q1, Impact Factor: 2.711), Vol. 314, pg. 1034-1040, 2014.
  46. Norhidayu Mohd Zain, Rafaqat Hussain & Mohammed Rafiq Abdul Kadir, “Surface Modification of Yttria Stabilized Zirconia via Polydopamine Inspired Coating for Hydroxyapatite Biomineralization“ Applied Surface Science (ISI, Q1, Impact Factor: 2.711), Vol. 322, pg. 169-176, 2014.
  47. Goh Yi Fan, Ammar Z. Alshemary, Muhammad Akram, Mohammed Rafiq Abdul Kadir & Rafaqat Hussain, “Bioactive Glass: An In-Vitro Comparative Study of Doping with Nanoscale Copper and Silver Particles” International Journal of Applied Glass Science (ISI, Q1, Impact Factor: 2.611), Vol. 5(3), pg. 255-266, 2014.
  48. Goh Yi Fan, Ammar Alshemary, Muhammad Akram, Mohammed Rafiq Abdul Kadir & Rafaqat Hussain, “In Vitro Characterization of Antibacterial Bioactive Glass Containing Ceria” Ceramics International (ISI, Q1, Impact Factor: 2.605), Vol. 40(1), pg. 729-737, 2014.
  49. Kalitheertha Jamuna-Thevi, Nurizzati M Daud, Mohammed Rafiq Abdul Kadir & Hendra Hermawan, “The influence of new wet synthesis route on the morphology, crystallinity and thermal stability of multiple ionic doped nanoapatite” Ceramics International (ISI, Q1, Impact Factor: 2.605), Vol. 40(1), pg. 1001-1012, 2014.
  50. Nida Iqbal, Mohammed Rafiq Abdul Kadir, Nasrul Humaimi Mahmood, Norita Salim, Gabriele R A Froemming, H R Balaji & Tunku Kamarul, “Characterization, antibacterial and in vitro compatibility of zinc- silver doped hydroxyapatite nanoparticles prepared through microwave synthesis” Ceramics International (ISI, Q1, Impact Factor: 2.605), Vol. 40(1), pg. 4507-4513, 2014.
  51. Nida Iqbal, Mohammed Rafiq Abdul Kadir, Nasrul Humaimi Mahmood, Mohd Faiz Mohd Yusoff, Jamal Akhter Siddiqui, Norita Salim, Gabriele R A Froemming, Murni Nazira Sarian, H R Balaji & Tunku Kamarul, “Microwave synthesis, characterization, bioactivity and in vitro biocompatibility of zeolite-hydroxyapatite composites for bone tissue engineering applications” Ceramics International (ISI, Q1, Impact Factor: 2.605), Vol. 40(10), pg. 16091-16097, 2014.
  52. Shahrouz Zamani Khalajabadi, Mohammed Rafiq Abdul Kadir, Izman Sudin, Hamidreza Bakhsheshi-Rad & Saeed Farahany, “Effect of mechanical alloying on the phase evolution, microstructure and bio-corrosion properties of Mg/HA/TiO2/MgO nanocomposite“ Ceramics International (ISI, Q1, Impact Factor: 2.605), Vol. 40(10), pg. 16743-16759, 2014.
  53. Wong Tuck Whye, Mat Uzir Wahit, Mohammed Rafiq Abdul Kadir, Mohammad Soheilmoghaddam & Harintharavimal Balakrishnan, “A novel poly (xylitol-dodecanedioate)/hyroxyapatite composite with shape memory behaviour“ Materials Letters (ISI, Q1, Impact Factor: 2.489), Vol. 126, pg. 105-108, 2014.
  54. Mokhamad Fakhrul Ulum, Ahmad Kafrawi Nasution, Abdu Hakim Yusop, Andril Arafat, Mohammed Rafiq Abdul Kadir, Vetnizah Juniantito, Deni Noviana & Hendra Hermawan, “Evidences of in vivo bioactivity of Fe-bioceramic composites for temporary bone implants“ Journal of Biomedical Materials Research Part B: Applied Biomaterials (ISI, Q2, Impact Factor: 2.759), accepted, in-press, 2014.
  55. Mohd Faiz Mohd Yusoff, Mohammed Rafiq Abdul Kadir, Nida Iqbal, Mas Ayu Hassan & Rafaqat Hussain, “Dipcoating of polycaprolactone/HA composite coating on Ti6Al4V for enhanced corrosion protection“ Surface and Coatings Technology (ISI, Q2, Impact Factor: 1.998), Vol. 245, pg. 102-107, 2014.
  56. Mohammadreza Daroonparvar, Hamidreza Bakhsheshi-rad, Azizi Mat Yajid, Noordin Mohd Yusof, Esah Hamzah & Mohammed Rafiq Abdul Kadir, “Corrosion resistance investigation of nanostructured Si and Si/TiO2 coated Mg alloy in 3.5% NaCl” Vacuum (ISI, Q2, Impact Factor: 1.858), Vol. 108, pg. 61-65, 2014.
  57. Hamidreza Bakhsheshi-rad, Esah Hamzah, Mohammadreza Daroonparvar, Safaa N Saud & Mohammed Rafiq Abdul Kadir, “Bi-layer nano-TiO2/FHA composite coatings on Mg-Zn-Ce alloy prepared by combined physical vapour deposition and electrochemical deposition methods” Vacuum (ISI, Q2, Impact Factor: 1.858), Vol. 110, pg. 127-135, 2014.
  58. Ahmed Ali A Madfa, Mohammed Rafiq Abdul Kadir, Jamal Kashani, Syafiqah Saidin, Eshamsul Sulaiman, Jamaludin Marhazlinda, Reza G Rahbari, Basri Johan J Abdullah, Hadijah Abdullah & Noor Hayaty Abu Kassim, “Stress distributions in maxillary central incisor restored with various types of post materials and design“ Medical Engineering and Physics (ISI, Q2, Impact Factor: 1.825), Vol. 36(7), pg. 962-967, 2014.
  59. Muhammad Hanif Ramlee, Mohammed Rafiq Abdul Kadir, Malliga Raman Murali & Tunku Kamarul, “Biomechanical evaluation of two commonly used external fixators in the treatment of open subtalar dislocation – a finite element analysis” Medical Engineering & Physics (ISI, Q2, Impact Factor: 1.825), Vol. 36(7), pg. 962-967, 2014.
  60. Muhammad Hanif Ramlee, Mohammed Rafiq Abdul Kadir, Malliga Raman Murali & Tunku Kamarul, “A Biomechanical analysis of three commonly used external fixation devices for treating Type III Pilon fractures using finite element analysis” Medical Engineering & Physics (ISI, Q2, Impact Factor: 1.825), Vol. 36(7), pg. 962-967, 2014.
  61. Sornambikai Sundaram, Annamalai Senthil Kumar, Madhanagopal Jagannathan & Mohammed Rafiq Abdul Kadir, “Stabilization of Hydroxylamine via Electrochemical Immobilization of 4-nitrophenol on Carbon Nanotube Modified Electrodes: NADH Electrocatalysis at Zero Potential“ Analytical Methods (ISI, Q2, Impact Factor: 1.821), Vol. 6, pg. 8894-8900, 2014.
  62. Muhammad Ruslan Abdullah, Amirhossein Goharian, Mohammed Rafiq Abdul Kadir & Mat Uzir Wahit, “Processing of a multi-layer polyetheretherketone composite for use in acetabular cup prosthesis“ Journal of Applied Polymer Science (ISI, Q2, Impact Factor: 1.768), Vol. 131(20), 40915, 2014.
  63. Jukka Matinlinna, Syafiqah Saidin, Mohammed Rafiq Abdul Kadir & Ammar Mustafa, “Influence of experimental silane primers on dentin bonding: shear bond strength, morphology and finite element analysis“ Journal of Prosthetic Dentistry (ISI, Q2, Impact Factor: 1.753), Vol. 112(6), pg. 1498-1506, 2014.
  64. Farnaz Naghizadeh, Naznin Sultana, Tengku Muzaffar Tengku Mohamad Shihabudin, Mohammed Rafiq Abdul Kadir, Rafaqat Hussain and Tunku Kamarul, “The Fabrication and Characterization of PCL/Rice Husk derived Bioactive Glass-Ceramic Composite Scaffolds“ Journal of Nanomaterials (ISI, Q2, Impact Factor: 1.644), online ID 253185, 2014.
  65. Hamidreza Bakhsheshi Rad, Esah Hamzah, Mohammadreza Daroonparvar, Muhammad Azizi Mat Yajid, M. Kasiri Asgarani, Mohammed Rafiq Abdul Kadir & Mamoun Medraj, “In-vitro degradation behavior of Mg alloy coated by fluorine doped hydroxyapatite and calcium deficient hydroxyapatite” Transactions of Nonferrous Metals Society of China (ISI, Q2, Impact Factor: 1.178), Vol. 24, pg. 2516-2528, 2014.
  66. Syahrullail Samion, Mohd I Izhan & Mohammed Rafiq Abdul Kadir, “Tribological Investigation of RBD Palm Olein in Different Sliding Speeds using Pin-on-Disk Tribotester” Scientia Iranica (ISI, Q2, Impact Factor: 1.025), Vol. 21, pg. 162-170, 2014.
  67. Mokhamad Fakhrul Ulum, Andril Arafat, Deni Noviana, Abdu Hakim Yusop, Ahmad Kafrawi Nasution, Mohammed Rafiq Abdul Kadir, & Hendra Hermawan, “In vitro and in vivo degradation evaluation of novel iron-bioceramic composites for bone implant applications“ Materials Science and Engineering C (ISI, Q3, Impact Factor: 3.088), Vol. 36, pg. 336-344, 2014.
  68. Jamuna Thevi, Nur Najiha Saarani, Mohammed Rafiq Abdul Kadir & Hendra Hermawan, “Triple-layered PLGA/nanoapatite/lauric acid graded composite membrane for periodontal guided bone regeneration“ Materials Science & Engineering C (ISI, Q3, Impact Factor: 3.088), Vol. 43, pg. 253-263, 2014.
  69. Ruwaida Rosli, Mohammed Rafiq Abdul Kadir & Tunku Kamarul, “Stability of Cervical Spine After One Level Corpectomy using Different Number of Screws and Plate Systems“ Journal of Engineering in Medicine (ISI, Q3, Impact Factor: 1.329), Vol. 228, pg. 342-349, 2014.
  70. Gan Hong Seng, Tan Tian Swee, Wong Ling Xuan, Tham Weng Kit, Khairil Amir Sayuti, Ahmad Helmy Abdul Karim & Mohammed Rafiq Abdul Kadir, “Interactive knee cartilage extraction using efficient segmentation software: Data from the osteoarthritis initiative“ Bio-Medical Materials and Engineering (ISI, Q3, Impact Factor: 1.091), Vol. 24, pg. 3145-3157, 2014.
  71. Andril Arafat, Mohd Hasbullah Idris, Mohammed Rafiq Abdul Kadir & Hassan Jafari, “Characterisation of Calcium Phosphate Coating on Investment Cast 316L Stainless Steel“ Materials Research Innovation (ISI, Q4, Impact Factor: 0.830), Vol. 18, pg. 886-891, 2014.
  72. Gan Hong Seng, Tan Tian Swee, Mohammed Rafiq Abdul Kadir, Ahmad Helmy Abdul Karim, Khairil Amir Sayuti, Wong Ling Xuan & Tham Weng Kit, “Medical image contrast enhancement using spline concept: Data from the osteoarthritis Initiative” Journal of Medical Imaging and Health Informatics (ISI, Q4, Impact Factor: 0.503), Vol. 4, pg. 511-520, 2014.
  73. Mina Alizadeh, Mohammed Rafiq Abdul Kadir, Mohd Fadhli Miskon, Ali Fallahi Arezoodar, Baharudin Azmi, Malliga Raman Murali & Tunku Kamarul, “The Use of X-shape Crosslink in Posterior Spinal Constructs Improves Stability in Thoracolumbar Burst Fracture: A Finite Element Study” Journal of Orthopaedic Research (ISI, Q1, Impact Factor: 2.972), Vol. 31(9), pg. 1447-1454, 2013.
  74. Hamidreza Bakhsheshi Rad, Mohammed Rafiq Abdul Kadir & Mohd Hasbullah Idris, “Synthesis and in vitro degradation evaluation of the nano-HA/MgF2 and DCPD/MgF2 composite coating on biodegradable Mg-Ca-Zn alloy” Surface and Coatings Technology (ISI, Q1, Impact Factor: 2.199), Vol. 222, pg. 79-89, 2013.
  75. Syafiqah Saidin, Pascal Chevallier, Mohammed Rafiq Abdul Kadir, Hendra Hermawan & Diego Mantovani, “Polydopamine as an intermediate layer for silver and hydroxyapatite immobilisation on metallic biomaterials surface” Materials Science and Engineering C – Materials for Biological Applications (ISI, Q2, Impact Factor: 2.736), Vol. 33(8), pg. 4715-4724, 2013.
  76. Ehsan Zeimaran, Mohammed Rafiq Abdul Kadir, Hussin Mohd Nor, Tunku Kamarul & Ivan Djordjevic, “Synthesis and characterization of polyacids from palm acid oil and sunflower oil via addition reaction” Bioorganic and Medicinal Chemistry Letters (ISI, Q2, Impact Factor: 2.331), Vol. 23, pg. 6616-6619, 2013.
  77. Goh Yi Fan, Ammar Z. Alshemary, Muhammad Akram, Mohammed Rafiq Abdul Kadir & Rafaqat Hussain, “In Vitro Study of Nano-sized Zinc Doped Bioactive Glass“ Materials Chemistry and Physics (ISI, Q1, Impact Factor: 2.129), Vol. 137(3), pg. 1031-1038, 2013.
  78. Hassan Jafari, Mohd Hasbullah Idris, Ali Ourdjini & Mohammed Rafiq Abdul Kadir “An investigation on interfacial reaction between in-situ melted AZ91D magnesium alloy and ceramic shell mold during investment casting process” Materials Chemistry and Physics (ISI, Q1, Impact Factor: 2.129), Vol. 138(2-3), pg. 672-681, 2013.
  79. Ammar Z. Alshemary, Goh Yi Fan, Muhammad Akram, Ili Rabihah Razali, Mohammed Rafiq Abdul Kadir & Rafaqat Hussain, “Microwave Assisted Synthesis of Nano Sized Sulphate Doped Hydroxyapatite“ Materials Research Bulletin (ISI, Q2, Impact Factor: 1.968), Vol. 48(6), pg. 2106-2110, 2013.
  80. Nida Iqbal, Mohammed Rafiq Abdul Kadir, Nik Ahmad Nizam Nik Malek, Nasrul Humaimi Mahmood, Mohd Faiz Mohd Yusoff, Kiran Kumar V. & Tunku Kamarul, “Characterization and Antibacterial Properties of Stable Silver Substituted Hydroxyapatite Nanoparticles Synthesized through Surfactant assisted Microwave Process” Materials Research Bulletin (ISI, Q2, Impact Factor: 1.968), Vol. 48(9), pg. 3172-3177, 2013.
  81. Ardiyansyah Syahrom, Mohammed Rafiq Abdul Kadir, Jaafar Abdullah & Andreas Ochsner “Permeability Studies of Artificial and Natural Cancellous Bone Structures” Medical Engineering & Physics (ISI, Q2, Impact Factor: 1.839), Vol. 35(6), pg. 792-799, 2013.
  82. Mohd Nazri Bajuri, Mohammed Rafiq Abdul Kadir, Malliga Raman Murali & Tunku Kamarul, “Biomechanical Analysis of the Wrist Arthroplasty in Rheumatoid Arthritis: A Finite Element Analysis” Medical and Biological Engineering and Computing (ISI, Q2, Impact Factor: 1.500), Vol. 51(1-2), pg. 175-186, 2013.
  83. Muhammad Ikman Ishak, Mohammed Rafiq Abdul Kadir, Eshamsul Sulaiman & Noor Hayaty Abu Kasim, “Finite Element Analysis of Zygomatic Implants in Intrasinus and Extramaxillary Approaches for Prosthetic Rehabilitation in Severely Atrophic Maxillae” International Journal of Oral and Maxillofacial Implants (ISI, Q2, Impact Factor: 1.491), Vol. 28, pg. 151-160, 2013.
  84. Hassan Jafari, Mohd Hasbullah Idris, Ali Ourdjini & Mohammed Rafiq Abdul Kadir, “Influence of Flux on Melting Characteristics and Surface Quality of in-situ Melting AZ91D” Materials and Manufacturing Processes (ISI, Q2, Impact Factor: 1.486), Vol. 28, pg. 148-153, 2013.
  85. Hamidreza Bakhsheshi Rad, Mohammed Rafiq Abdul Kadir & Mohd Hasbullah Idris, “The effect of fluoride treatment on corrosion behavior and in-vitro biocompatibility of Mg-1Ca binary alloy for implant application” Transactions of Nonferrous Metals Society of China (ISI, Q2, Impact Factor: 1.001), Vol. 23, pg. 699-710, 2013.
  86. Rosdi Daud, Mohammed Rafiq Abdul Kadir, Izman Sudin, Amir Putra, Muhammad Hisyam Lee & Aminudin Che Ahmad, “Three Dimensional Morphometric Study of the Trapezium Shape of the Trochlea Tali“ Journal of Foot and Ankle Surgery (ISI, Q3, Impact Factor: 0.979), Vol. 52(4), pg. 426-431, 2013.
  87. Amir Fereidouni Lotfabadi, Mohd Hasbullah Idris, Ali Ourdjini, Mohammed Rafiq Abdul Kadir, Saeed Farahany & Hamidreza Bakhsheshi Rad, “Thermal characteristics and corrosion behaviour of Mg-xZn alloys for biomedical applications“ Bulletin of Materials Science (ISI, Q3, Impact Factor: 0.870), Vol. 36(6), pg. 1103-1113, 2013.
  88. Hamidreza Bakhsheshi Rad, Behrouz Haerian, Abbas Najafizadeh, Mohd Hasbullah Idris, Mohammed Rafiq Abdul Kadir, Esah Hamzah & M. Daroonparvar, “Cold deformation and heat treatment influence on the microstructures and corrosion behavior of AISI 304 stainless steel” Canadian Metallurgical Quarterly (ISI, Q3, Impact Factor: 0.495) Vol. 52(4), pg. 449-457, 2013.
  89. Raja Mohd Aizat, Mohammed Rafiq Abdul Kadir, Shaifuzain Ab Rahman, Tengku Muzaffar Tengku Md Shihabudin, Norzurani Robson & Tunku Kamarul, “Biomechanical Comparative Analyses between the Anterolateral and Medial Distal Tibia Locking Plates in Treating Complex Distal Tibial Fracture: A Finite Element Study” Journal of Medical Imaging and Health Informatics (ISI, Q4, Impact Factor: 0.623), Vol. 3(4), pg. 532-537, 2013.
  90. Ishkrizat Taib, Mohammed Rafiq Abdul Kadir, Mohd Hazmil Syahidy, Ahmad Zahran Md Khuzari & Kahar Osman, “Analysis of Hemodynamic Differences for Stenting Patent Ductus Arteriosus” Journal of Medical Imaging and Health Informatics (ISI, Q4, Impact Factor: 0.623), Vol. 3(4), pg. 555-560, 2013.
  91. Aisyah Ahmad Shafi, Mohammed Rafiq Abdul Kadir, Eshamsul Sulaiman, Noor Hayaty Abu Kasim & Noor Lide Abu Kassim, “The Effect of Dental Implant Materials and Thread Profiles – A Finite Element and Statistical Study” Journal of Medical Imaging and Health Informatics (ISI, Q4, Impact Factor: 0.623), Vol. 3(4), pg. 509-513, 2013.
  92. Badreddin Giuma S.K., Kahar Osman & Mohammed Rafiq Abdul Kadir, “Fluid Structure Interaction Analysis in Abdominal Aortic Aneurysms: Influencce of Diameter, Length and Distal Neck” Journal of Medical Imaging and Health Informatics (ISI, Q4, Impact Factor: 0.623), Vol. 3(4), pg. 514-522, 2013.
  93. Mazatusziha Ahmad, Mat Uzir Wahit, Mohammed Rafiq Abdul Kadir & Khairul Zaman Mohd Dahlan, “Thermal and Mechanical Properties of Ultra High Molecular Weight Polyethylene / High Density Polyethylene/Polyethylene Glycol Blends” Journal of Polymer Engineering (ISI, Q4, Impact Factor: 0.500) Vol. 33(7), pg. 599-614, 2013.
  94. Shervin Eslami Harandi, Mohammad Mirshahi, Shahriai Koleini, Mohd Hasbullah Idris, Hassan Jafari & Mohammed Rafiq Abdul Kadir, “Effect of calcium content on the microstructure, hardness and in-vitro corrosion behaviour of biodegradable Mg-Ca binary alloy” Materials Research (ISI, Q4, Impact Factor: 0.483), Vol. 16(1), pg. 11-18, 2013.
  95. Azadeh Nilghaz, Dedy H.B. Wicaksono, Dwi Gustiono, Fadzilah Adibah Abdul Majid, Eko Supriyanto and Mohammed Rafiq Abdul Kadir “Flexible Microfluidic Cloth-based Analytical Devices Using a Low-Cost Wax Patterning Technique” Lab on a Chip (ISI, Q1, Impact Factor: 5.697), Vol. 12, pg. 209-218, 2012.
  96. Hamidreza Bakhsheshi Rad, Mohammed Rafiq Abdul Kadir, Mohd Hasbullah Idris & Saed Farahany, “Relationship between the corrosion behaviour and the thermal characteristics and microstructure of Mg-0.5Ca-xZn alloys” Corrosion Science (ISI, Q1, Impact Factor: 3.615), Vol. 64, pg. 184-197, 2012.
  97. Syafiqah Saidin, Mohammed Rafiq Abdul Kadir, Eshamsul Sulaiman & Noor Hayaty Abu Kassim, “Effects of different implant-abutment connections on micromotion and stress distribution: Prediction of microgap formation” Journal of Dentistry (ISI, Q1, Impact Factor: 3.200), Vol. 40, pg. 467-474, 2012.
  98. Hamidreza Bakhsheshi Rad, Mohd Hasbullah Idris, Mohammed Rafiq Abdul Kadir & Saeed Farahany, “Microstructure Analysis and Corrosion Behavior of Biodegradable Mg-Ca Implant Alloys” Materials & Design (ISI, Q1, Impact Factor: 2.913) Vol. 33, pg. 88-97, 2012.
  99. Shahrouz Zamani, Hamidreza Bakhsheshi Rad, Mohammed Rafiq Abdul Kadir &       Mohammad Reza Mohammad Shafiee, “Synthesis and kinetic study of (Mo,W)Si2-WSi2 nanocomposite by mechanical alloying“ Journal of Alloys and Compounds (ISI, Q1, Impact Factor: 2.390), Vol. 540, pg. 248-259, 2012.
  100. Nida Iqbal Khan, Mohammed Rafiq Abdul Kadir, Nik Ahmad Nizam Nik Malek, Malliga Raman Murali & Tunku Kamarul, “Rapid microwave assisted synthesis and characterization of nanosized silver-doped hydroxyapatite with antibacterial properties” Materials Letters (ISI, Q1, Impact Factor: 2.224), Vol. 89, pg. 118-122, 2012.
  101. Raja Mohd Aizat Raja Izaham, Mohammed Rafiq Abdul Kadir, Abdul Halim Abdul Rashid, Md Golam Hossain & Tunku Kamarul, “Finite element analysis of Puddu and Tomofix plate fixation for open wedge high tibial osteotomy“ Injury (ISI, Q1, Impact Factor: 2.174), Vol. 43(6), pg. 898-902, 2012.
  102. Shahrouz Zamani, Hamidreza Bakhsheshi Rad, Ali Shokuhfar, Mohamad Reza Vaezi, Mohammed Rafiq Abdul Kadir, & Mohammad Reza Mohammad Shafiee “Synthesis and Characterisation of MoSi2 – Mo5Si3 nanocomposite by Mechanical Alloying and Heat Treatment” International Journal of Refractory Metals and Hard Materials (ISI, Q1, Impact Factor: 1.858), Vol. 31, pg. 236-241, 2012.
  103. Mazatusziha Ahmad, Mat Uzir Wahit, Mohammed Rafiq Abdul Kadir & Khairul Zaman Mohd Dahlan, “Mechanical, Rheological and Bioactivity Properties of Ultra High Molecular Weight Polyethylene Bioactive Composites Containing Polyethylene Glycol and Hydroxyapatite” The Scientific World Journal (ISI, Q1, Impact Factor: 1.730), Article ID 474851, 2012.
  104. Alireza Samavati, Sib Krishna Ghoshal, Zulkafli Othaman, Mohammad Reza Dousti and Mohammed Rafiq Abdul Kadir “Substrate Temperature Dependent Surface Morphology and Photoluminescence of Germanium Quantum Dots Grown by Radio Frequency Magnetron Sputtering” International Journal of Molecular Science (ISI, Q2, Impact Factor: 2.464), Vol. 13, pg. 12880-12889, 2012.
  105. Saeed Farahany, Hamidreza Bakhsheshi Rad, Mohd Hasbullah Idris, Mohammed Rafiq Abdul Kadir, Amir Fereidouni Lotfabadi & Ali Ourdjini, “In-situ thermal analysis and macroscopical characterization of Mg-xCa and Mg-0.5Ca-xZn alloy systems” Thermochimica Acta (ISI, Q2, Impact Factor: 1.989), Vol. 527, pg. 180-189, 2012.
  106. Mohd Nazri Bajuri, Mohammed Rafiq Abdul Kadir, Murali Malliga Raman & Tunku Kamarul, “Mechanical and functional assessment of the wrist affected by rheumatoid arthritis: A finite element analysis” Medical Engineering & Physics (ISI, Q2, Impact Factor: 1.779), Vol. 34(9), pg. 1294-1302, 2012.
  107. Muhammad Ikman Ishak, Mohammed Rafiq Abdul Kadir, Eshamsul Sulaiman & Noor Hayaty Abu Kasim, “Finite Element Analysis of Different Surgical Approaches in Various Occlusal Loading Locations for Zygomatic Implant Placement for the Treatment of Atrophic Maxillae” International Journal of Oral and Maxillofacial Surgery (ISI, Q2, Impact Factor: 1.521), Vol. 41, pg. 1077-1089, 2012.
  108. Tiong Chiong Ing, Mohammed Rafiq Abdul Kadir, Azli Yahya & Syahrullail Samion, “The Effect of Temperature on the Tribological Behaviour of RBD Palm Stearin” Tribology Transactions (ISI, Q2, Impact Factor: 0.914), Vol. 55, pg. 539-548, 2012.
  109. Hassan Jafari, Mohd Hasbullah Idris, Ali Ourdjini, Saeed Farahany & Mohammed Rafiq Abdul Kadir, “Characterization of AZ91D Granules Covered with a Flux during In-situ Melting” Particle & Particle Systems Characterization (ISI, Q2, Impact Factor: 0.857), Vol. 29, pg. 1-10, 2012.
  110. Mohd Nazri Bajuri, Mohammed Rafiq Abdul Kadir, Iskandar Mohd Amin & Andreas Öchsner, “Biomechanical Analysis of Rheumatoid Arthritis of the Wrist Joint” Journal of Engineering in Medicine (ISI, Q3, Impact Factor: 1.419), Vol. 226 (7), pg. 510-520, 2012.
  111. Tiong Chiong Ing, Mohammed Rafiq Abdul Kadir, Azli Yahya & Syahrullail Samion, “Tribological Behaviour of Refined Bleached and Deodorized Palm Olein in Different Loads using a Four-ball Tribotester” Scientia Iranica B (ISI, Q3, Impact Factor: 0.537), Vol. 19(6), pg. 1487-1492, 2012.
  112. Tiong Chiong Ing, Azli Yahya, Mohammed Rafiq Abdul Kadir & Syahrullail Samion, “Tribological Evaluation of Refined, Bleached and Deodorised Palm Stearin using Four-ball Tribotester with Different Normal Load” Journal of Zhejiang University – Science A (ISI, Q3, Impact Factor: 0.527), Vol. 13(8), pg. 633-640, 2012.
  113. Ali Ata Al-Sarhan, Naznin Sultana, Mohammed Rafiq Abdul Kadir & Talal Aburjai, “Ethnopharmacological survey of medicinal plants in Malaysia, the Kangkar Pulai region“ International Journal of Pharmacology (ISI, Q4, Impact Factor: 1.202), Vol. 8(8), pg. 679-686, 2012.
  114. Nasrul Hadi Johari, Kahar Osman, Zuliazura Mohd Salleh, Juhara Haron & Mohammed Rafiq Abdul Kadir, “The Effect of Different Locations of Tracheal Stenosis to the Flow Characteristics using Reconstructed CT-Scanned Image” Journal of Mechanics in Medicine and Biology (ISI, Q4, Impact Factor: 0.758), Vol. 12(4), pg. 1250066-1 – 1250066-15, 2012.
  115. Hamidreza Bakhsheshi Rad, Ahmad Monshi, Mohd Hasbullah Idris, Mohammed Rafiq Abdul Kadir & Hassan Jafari, “Premature Failure Analysis of Forged Cold Back-up Roll in a Continuous Tandem Mill” Materials & Design (ISI, Q1, Impact Factor: 2.200), Vol. 32(8-9), pg. 4376-4384, 2011.
  116. Ardiyansyah Syahrom, Mohammed Rafiq Abdul Kadir, Jaafar Abdullah & Andreas Ochsner, “Mechanical and Microarchitectural Analyses of Cancellous Bone Through Experiment and Computer Simulation” Medical & Biological Engineering & Computing (ISI, Q1, Impact Factor: 1.878), Vol. 49(12), pg. 1393-1493, 2011.
  117. Mohd Yusof Baharuddin, Mohammed Rafiq Abdul Kadir, Ahmad Hafiz Zulkifly, Azlin Sa’at, Azian Abdul Aziz & Muhammad Hisyam Lee, “Morphology Study of the Proximal Femur in Malay Population” International Journal of Morphology (ISI, Q4, Impact Factor: 0.244), Vol. 29(4), pg. 1321-1325, 2011.
  118. Hamidreza Bakhsheshi Rad, Ahmad Monshi, Hossain Monajatizadeh, Mohd Hasbullah Idris, Mohammed Rafiq Abdul Kadir & Hassan Jafari, “Effect of Multi-Step Tempering on Retained Austenite and Mechanical Properties of Low Alloy Steel” International Journal of Iron and Steel Research (ISI, Q4, Impact Factor: 0.213), Vol. 18(12), pg. 49-56, 2011.
  119. Mohammed Rafiq Abdul Kadir, Ardiyansyah Syahrom & Andreas Öchsner, “Finite Element Analysis of Idealised Unit Cell Cancellous Structure Based on Morphological Indices of Cancellous Bone” Medical & Biological Engineering & Computing (ISI, Q2, Impact Factor: 1.791), Vol. 48(5), pg. 497-505, 2010.
  120. Mohammed Rafiq Abdul Kadir, Ulrich Hansen, Ralf Klabunde, Duncan Lucas & Andrew Amis, “Finite element modelling of primary hip stem stability: The effect of interference fit” Journal of Biomechanics (ISI, Q2, Impact Factor: 2.784), Vol. 41, pg. 587-594, 2008.