Academic Year: 2022/23
U27. Tan Jia Yii (EFFECT OF WORN TOP COMPRESSION RING AND LUBRICANT DEGRADATION TOWARDS ENGINE IN-CYLINDER FRICTIONAL LOSSES)
U26. Mok Zhi Yang (EFFECT OF SURFACE ROUGHNESS ON THE FILM THICKNESS FOR AN ELASTOHYDRODYNAMIC LUBRICATED CONTACT)
U25. Ng Jian Hao (MATHEMATICAL MODELLING OF BEARING LUBRICATION FOR ELECTRIC VEHICLE MOTOR BEARING)
U24. Daniel Ngieng Jian Sheng (ALTERING WETTABILITY AND PHYSICO-CHEMICAL PROPERTIES OF IONIC LIQUID WITH CARBON NANOTUBES AS GREEN AUTOMOTIVE LUBRICANT)
Academic Year: 2021/22
U23. Kuy Chuang Yee (ENERGY CONSUMPTION ANALYSIS FOR ENERGY EFFICIENT VEHICLES IN MALAYSIA)
U22. Muhammad Afhdal Aleef bin Mokhtaza (DEVELOPMENT OF FZG GEAR TESTER)
U21. Elizabeth Anak Balan (METHYL LAURATE AS AN ADDITIVE IN TRIMETHYLOLPROPANE TRIOLEATE BIOLUBRICANT)
Academic Year: 2020/21
U21. Hong Pui Yee (TRIBOLOGICAL PERFORMANCE OF PERFLUOROPOLYETHER (PFPE)- BASED GREASE FOR POTENTIAL APPLICATION IN AUTOMOTIVE BEARINGS)
U20. Kimberly Foo Ming Xia (TRIBOLOGICAL IMPACT OF INTERMEDIATE ESTERS IN FATTY ACID METHYL ESTERS (FAME) AT DIFFERENT REGIMES OF LUBRICATION)
U19. Law Ying Hui (A NUMERICAL TRANSIENT THERMO-ELASTOHYDRODYNAMIC LUBRICATION MODEL OF SHORT JOURNAL BEARINGS FOR AUTOMOTIVE COMPONENTS)
U18. Nur Aisya Affrina binti Mohamed Ariffin (EFFECT OF SQUEEZE FILM TOWARDS PISTON RING-LINER CONTACT DURING PISTON MOTION REVERSAL AT DEAD-CENTRES)
U17. Tan Puo Yin Biona (SIMULATING FRICTIONAL LOSSES IN AUTOMOTIVE TURBOCHARGER JOURNAL BEARING)
Academic Year: 2019/20
U16. Seri Aisyah binti Che Hassan (Influence of moisture absorption towards frictional properties of hybrid fibre reinforced composite materials)
U15. Mohd Aedib Aezim bin Mohd Niza Padillah (Frictional properties of grease lubricated contact at different operating regimes of lubrication)
U14. Low Hong Lian (Effect of reaction intermediate esters towards boundary lubricity of palm oil derived biodiesel)
U13. Low Huey Jiuan (Thermo-elastohydrodynamic analysis of piston connecting-rod big end journal bearing lubrication system)
U12. Lee Jia Long (Measuring Stribeck curves for lubricant at different supply temperatures)
Academic Year: 2018/19
U11. Bryan Chai Yen Boon (Predicting frictional losses generated by piston connecting rod big end journal bearing for an internal combustion engine)
U10. Low Chia Wei (Thermal assessment of tribological properties of turbocharger journal bearing)
U9. Fong Jian Yip (Tribological Analysis on the Effect of Heat Transfer towards Engine In-cylinder Friction)
U8. Muhammad Syazwan bin Azman (The extent of moisture attack towards mechanical and tribological properties of carbon fibre reinforced epoxy and flax fibre reinforced epoxy composite materials)
Academic Year: 2017/18
U7. Tee Jia Wei (Tribological analysis on the effect of different piston ring profiles towards engine in-cylinder friction)
U6. Chu Jun Hao (A friction study on automotive connecting-rod big end journal bearing lubrication system)
U5. Mohd Syafiq Aswan bin Hissam (Influence of Resin-Hardener Ratio Towards Frictional Properties for Epoxy Composite Materials Under Pure Sliding Motion)
Academic Year: 2016/17
U4. Daniel Lim Yung Kiat (An elastohydrodynamic lubrication analysis of the cam-tappet contact in a valvetrain system)
U3. Mohamad Anas Sarkiah (Frictional characterisation of dry and lubricated contact for composite materials in relative motion)
U2. Muhamad Hisyam Din (Frictional analysis on engine lubricant dilution by vegetable oil derived biodiesel)
U1. Ng Young Ching (Development of a mathematical tool to predict engine in-cylinder friction)