1. RESEARCH UNIVERSITY GRANTS
Head of Project:
1. Head of project: Surface protection of the Mg alloys with plasma sprayed nanostructured coatings for the low and high temperature applications
POST DOCTORAL FELLOWSHIP RU (UTM). RM 77,000 (2014-2015)
Vot No. R.J130000.7113.4N001. (Completed)
2. Head of project: Effect of Pre-heat Treatment on The Microstructural Evolution of Different Thermal Barrier Coating Systems in the Vacuum Furnace
POST DOCTORAL FELLOWSHIP RU (UTM). RM 77,000 (2013-2014)
Vot No. Q.J130000.21A2.00E81. (Completed)
3. Head of Project: Development of Maerogel Coating on Metal Substrate for High Temperature Applications
UTM GUP Tier 1 (Research University Grant). RM 153,000 (2012-2015).
Vot No. Q.J130000.2524.04H78. (Completed).
4. Head of Project: Nanoscale Interfacial Investigation of Diamond Coating on Stainless Steel Substrate using Hot Filament Chemical Vapour Deposition
UTM GUP Tier 2 (Research University Grant). RM 40,000 (2011-2013).
Vot No. 7124.01J59. (Completed).
Researcher:
1. Researcher: Deposition of Cu Interconnection Materials for Through-Silicon Vias (TSV) Applications by Electroless Plating
UTM GUP Tier 2 (Research University Grant). RM 50,000 (2014-2015).
Vot No. Q.J130000.2624.09J59 (Completed)
(Head of Project: Dr. Nor Akmal Fadil)
2. Researcher: Seeding Effect on HFCVD Diamond Coated on Tungsten Carbide Substrate for Grinding Application
UTM GUP Tier 2 (Research University Grant). RM 49,400 (2014-2015).
Vot No. Q.J130000.2624.09J87 (Completed)
(Head of Project: Dr.Engku Mohammad Nazim Bin Engku Abu Bakar)
3. Researcher: Experimental analysis on the ceramic materials used for Turbocharger Turbine Volute Casing of Automotive Internal Combustion Engine (ICE)
UTM GUP Tier 1 (Research University Grant). RM 39,006.73 (2014-2015).
Vot No. Q.J130000.2509.06H94 (Completed)
(Head of Project: Dato’ Prof. Ir. Dr. Alias Bin Mohd Noor)
4. Researcher: Processing of Biodegradable Materials for Oil Spillage
UTM GUP Tier 1 (Research University Grant). RM 200,000 (2012-2014).
Vot No. Q.J130000.2524.04H73 (Completed)
(Head of Project: Prof. Dr.Jamaliah Idris)
5. Researcher: Synthesis of Nano-Crystalline Metal and Binary/Ternary Alloy powders by Attrition Milling / Mechanical Alloying for Aerospace and Power Generation Industries
UTM GUP Tier 1 (Research University Grant). RM 150,000 (2011-2013).
Vot No. Q.J130000.2524.02H55. (Completed)
(Head of Project: Prof. Dr.Noordin Mohd Yusof)
6. Researcher: Application of Auxetic Materials in Vehicle Bumper Systems: Analytical, Computational, and Experimental Approaches
UTM GUP Tier 1 (Research University Grant). RM 100,000 (2012-2014).
Vot No. 2524.03H10 (Completed)
(Head of Project: Assoc. Prof. Dr. Yunan Prawoto)
7. Researcher: Development of Self-healing Coatings for Anti-Fouling of Marine Structures
UTM GUP Tier 1 (Research University Grant). RM 100,000 (2012-2014).
Vot No. 2524.03H16. (Completed)
(Head of Project: Prof Dr Ali Ourdjini / Dr Tuty Asma Abu Bakar)
8. Researcher: Degradation of Corrosion Protective Coatings on Steel: Computational and Experimental Approaches to Blistering Formation and Development.
UTM GUP Tier 1 (Research University Grant) RM 150,000 (2011-2013).
Vot No. 7124.00H14. (Completed)
(Head of Project: Assoc. Prof. Dr. Yunan Prawoto)
9. Researcher: Investigation on the effect of third body formation between the sliding surface at pad and disc during squeal condition.
UTM GUP Tier 2 (Research University Grant). RM 40,000 (2011-2012).
Vot No. Q.J130000.2624.00J45. (Completed)
(Head of Project: Dr Mohd Kameil Abd Hamid)
10. Researcher: Hot Filament Chemical Vapour Deposition (HFCVD) Diamond Grains Morphology for Ultra Precision Grinding Application.
UTM GUP Tier 2 (Research University Grant). RM 40,000 (2011-2012).
Vot No. 7124.04J04. (Closed)
(Head of Project: Mr Engku Mohamad Nazim Engku Abu Bakar)
11. Researcher: Development and Characterisation of Amorphous and Crystalline Nickel Titanium Shape Memory Alloy Coating for Tribological Applications
UTM GUP Tier 2 (Research University Grant). RM 40,000 (2011-2012).
Vot No. 7124.04J46. (Completed)
(Head of Project: Dr Tuty Asma Abu Bakar)
12. Researcher: Alumina Activated Carbon Composites Membrane by Extrusion Process
UTM GUP Tier 2 (Research University Grant). RM 40,000 (2011-2012).
Vot No. 7124.04J20. (Completed)
(Head of Project: Dr Norhayati Ahmad)
13. Researcher: Evaluation on the preferred growth orientation of dendrite structure of Al-Si cast alloy
UTM GUP Tier 2 (Research University Grant). RM 40,000 (2011-2012).
Vot No. Q.J130000.2624.03J60. (Completed)
(Head of Project: Dr Dadan Ramdan / Dr Joy Rizki Pangestu Djuansjah)
B. FUNDAMENTAL RESEARCH GRANT SCHEME (FRGS FUND) BY MINISTRY OF EDUCATION (MOE)
Head of Project:
1. Head of Project: Nanoscale Microstructural Characterization of Cu-Al-Ti Metallic Multilayer Coatings on Alumina Substrate using PVD Method
FRGS (Ministry of Higher Education, MOHE). RM 55,900 (2010-2013),
Vot No. 78702 (Completed).
Researcher:
1. Researcher: The Bonding Interface Morphology of Nanocrysralline Diamond Deposited on Tungsten Carbide using Hot Filamen Chemical Vapour Deposition Technique
FRGS (Ministry of Higher Education, MOHE). RM 88,000 (2010-2012),
Vot No. 78674. (Completed)
(Head of Project: Prof. Dr. Esah Hamzah)
C. FLAGSHIP RESEARCH GRANT SCHEME (FRGS) RESEARCH PROJECT
Researcher:
1. Researcher: Development of Silicon Oxide Based Coatings for Fouling Control in LNG Carrier
Flagship (Ministry of Higher Education, MOHE). RM 118,400. (2011-2013)
Vot No. Q.J130000.2424.00G45 (Completed)
(Head of Project: Prof Dr Ali Ourdjini / Prof Dr Esah Hamzah)
