Journal Papers

PUBLICATIONS

 H INDEX : 7

 CUMULATIVE IMPACT FACTOR (CIF) : 54.389

 NUMBER OF ISI / IMPACT FACTOR PAPER : 28

 NUMBER OF SCOPUS PAPER : 13

 NUMBER OF BOOK CHAPTER : 1

JOURNAL

ISI Journal:

2016

 

  1. Bakhsheshi-Rad, H.R., Hamzah, E., Ismail, A. F., Daroonparvar, M., Yajid, M.A.M., Medraj, M. (2016) Preparation and characterization of NiCrAlY/nano-YSZ/PCL composite coatings obtained by combination of atmospheric plasma spraying and dip coating on Mg-Ca alloy. Journal of Alloys and compounds, 658, Pages 440-452 (Thomson ISI-Impact factor:  2.999 – Q1: METALLURGY & METALLURGICAL ENGINEERING).

 

  1. Mohammadreza Daroonparvar, Muhamad Azizi Mat Yajid, Noordin Mohd Yusof, Hamid Reza Bakhsheshi-Rad, Esah Hamzah (2016) Microstructural characterisation of air plasma sprayed nanostructure ceramic coatings on Mg-1%Ca alloys (bonded by NiCoCrAlYTa alloy) Ceramics International, 42, Pages 357-371 (Thomson ISI-Impact factor: 2.605 – Q1: MATERIALS SCIENCE, CERAMICS).

 

 

2015

 

 

  1. Mohammadreza Daroonparvar, Muhamad Azizi Mat Yajid, Noordin Mohd Yusof, Hamid Reza Bakhsheshi-Rad, Esah Hamzah, Tina Mardanikivi (2015) Deposition of duplex MAO layer/nanostructured titanium dioxide composite coatings on Mg–1%Ca alloy using a combined technique of air plasma spraying and micro arc oxidation. Journal of Alloys and compounds, 649, Pages 591-605 (Thomson ISI-Impact factor: 2.999 – Q1: METALLURGY & METALLURGICAL ENGINEERING).

 

  1. Mohammadreza Daroonparvar, Muhamad Azizi Mat Yajid, Noordin Mohd Yusof, Hamid Reza Bakhsheshi-Rad, Mohsen Adabi, Esah Hamzah, Hussein Ali Kamali (2015) Improvement of Corrosion Resistance of Binary Mg-Ca Alloys Using Duplex Aluminum-Chromium Coatings. Journal of Materials Engineering and Performance, 24, 7, Pages 2614-2627 (Thomson ISI-Impact factor: 0.998 – Q3: MATERIALS SCIENCE).

 

 

  1. Mohammadreza Daroonparvar, Muhamad Azizi Mat Yajid, Noordin Mohd Yusof, Hamid Reza Bakhsheshi-Rad (2015) Fabrication and Properties of Triplex NiCrAlY/nano Al2O3 13%TiO2/nano TiO2 Coatings on a Magnesium Alloy by Atmospheric Plasma Spraying Method. Journal of Alloys and compounds, 645, Pages 450-466 (Thomson ISI-Impact factor: 2.999 – Q1: METALLURGY & METALLURGICAL ENGINEERING).

 

 

2014

 

  1. Mohammadreza Daroonparvar, Muhamad Azizi Mat Yajid, Noordin Mohd Yusof, Hamid Reza Bakhsheshi-Rad, Esah Hamzah, Mohsen Nazoktabar (2014) Investigation of three steps of hot corrosion process in Y2O3 stabilized ZrO2 coatings including nano zones. Journal of Rare Earths, 32, 10, Pages 989-1002 (Thomson ISI-Impact factor: 1.261 – Q3: CHEMISTRY, APPLIED).

 

  1. Bakhsheshi-Rad, H.R., Hamzah, E., Fereidouni-Lotfabadi, A., Daroonparvar, M., Yajid, M.A.M., Mezbahul-Islam, M., Kasiri-Asgarani, M., Medraj, M. (2014) Microstructure and bio-corrosion behavior of Mg-Zn and Mg-Zn-Ca alloys for biomedical applications. Materials and Corrosion, 65, 12, Pages 1178-1187 (Thomson ISI-Impact factor: 1.373 – Q2: METALLURGY & METALLURGICAL ENGINEERING).

 

  1. Bakhsheshi-Rad, H.R., Hamzah, E., Daroonparvar, M., Yajid, M.A.M., Kasiri-Asgarani, M., Abdul-Kadir, M.R., Medraj (2014). In-vitro degradation behavior of Mg alloy coated by fluorine doped hydroxyapatite and calcium deficient hydroxyapatite. Oral Oncology, 50, 10, Pages 2516-2528 (Thomson ISI-Impact factor: 3.607 – Q1: DENTISTRY, ORAL, SURGERY & MEDICINE).

 

  1. Bakhsheshi-Rad, H.R., Hamzah, E., Medraj, M., Idris, M.H., Lotfabadi, A.F., Daroonparvar, M., Yajid, M.A.M. (2014) Effect of heat treatment on the microstructure and corrosion behaviour of Mg-Zn alloys. Materials and Corrosion – Werkstoffe Und Korrosion, 65, 10, Pages 999-1006 (Thomson ISI-Impact factor: 1.373 – Q2: METALLURGY & METALLURGICAL ENGINEERING).

 

  1. Mohammadreza Daroonparvar, Muhamad Azizi Mat Yajid, Noordin Mohd Yusof, Hamid Reza Bakhsheshi-Rad, Esah Hamzah, Hussein Ali Kamali (2014) Microstructural characterization and corrosion resistance evaluation of nanostructured Al and Al/AlCr coated Mg–Zn–Ce–La alloy. Journal of Alloys and compounds, 615, 5, Pages 657-671 (Thomson ISI-Impact factor: 2.999 – Q1: METALLURGY & METALLURGICAL ENGINEERING).

 

  1. Bakhsheshi-Rad, H.R., Hamzah, E., Daroonparvar, M., Yajid, M.A.M., Medraj, M. (2014) Fabrication and corrosion behavior of Si/HA nano-composite coatings on biodegradable Mg-Zn-Mn-Ca alloy. Surface and Coatings Technology, 258, Pages 1090-1099. (Thomson ISI-Impact factor: 1.998 – Q2: MATERIALS SCIENCE, COATINGS & FILMS).

 

  1. Bakhsheshi-Rad, H.R., Hamzah, E., Daroonparvar, M., Yajid, M.A.M., Kasiri-Asgarani, M, Abdul-Kadir, M. R., Medraj, M. (2014) In-vitro degradation behavior of Mg alloy coated by fluorine doped hydroxyapatite and calcium deficient hydroxyapatite. Transactions of Nonferrous Metals Society of China (English Edition), 24, pages 2516-2528 (Thomson ISI-Impact factor:1.178 – Q2: METALLURGY & METALLURGICAL ENGINEERING)

 

  1. Daroonparvar*, M.A.M. Yajid, H.R. Bakhsheshi-Rad, N.M. Yusof, S. Izman, E. Hamzah, M.R. Abdul Kadir (2014) Corrosion resistance investigation of nanostructured Si- and Si/TiO2-coated Mg alloy in 3.5% NaCl solution. Vacuum, 108, Pages 61-65 (Thomson ISI-Impact factor: 1.858 – Q2: MATERIALS SCIENCE, MULTIDISCIPLINARY).

 

  1. Mohammadreza Daroonparvar, Muhamad Azizi Mat Yajid, Noordin .Mohd.Yusof, Hamid Reza Bakhsheshi-Rad, Zia Valefi & Esah Hamzah (2014) Effect of Y2O3 stabilized ZrO2 coating with tri-model structure on bi-layered thermally grown oxide evolution in nano thermal barrier coating systems at elevated temperatures. Journal of Rare Earths, 32, 1, Pages 57-77 (Thomson ISI-Impact factor:  1.261 – Q3: CHEMISTRY, APPLIED).

 

2013

 

  1. Mohammadreza Daroonparvar, Muhamad Azizi Mat Yajid, Noordin .Mohd.Yusof, Hamid Reza Bakhsheshi-Rad, Mohammad Sakhawat Hussain & Esah Hamzah (2013) Evaluation of normal and nanolayer composite thermal barrier coatings in fused vanadate-sulfate salts at 1000o Advances in Materials Science and Engineering, Volume 2013 Article number 790318 (Thomson ISI-Impact factor:  0.744 – Q4: MATERIALS SCIENCE, MULTIDISCIPLINARY)

 

  1. Mohammadreza Daroonparvar, Muhamad Azizi Mat Yajid, Noordin .Mohd.Yusof & Mohammad Sakhawat Hussain (2013) Formation of a dense and continues Al2O3 layer in nano thermal barrier coating systems for suppression of the spinels growth on the Al2O3 oxide scale during oxidation. Journal of Alloys and compounds, 571, 15, Pages 205-220 (Thomson ISI-Impact factor:  2.999 – Q1: METALLURGY & METALLURGICAL ENGINEERING).

 

  1. Tang, C., Rohani, J. M., Yajid, M. A. M (2013) Characterization of green corrosion inhibitor using taguchi dynamic approach. International Journal of Electrochemical Science, 8, 6, pages 7991-8004 (Thomson ISI-Impact factor: 1.500 – Q3: ELECTROCHEMISTRY).

 

  1. Daroonparvar, M., Yajid, M.A.M., Yusof, N.M., Farahany, S., Hussain, M.S., Bakhsheshi-Rad, H.R., Valefi, Z., Abdolahi, A. (2013) Improvement of thermally grown oxide layer in thermal barrier coating systems with nano alumina as third layer. Transactions of Nonferrous Metals Society of China (English Edition), 23, 5, pages 1322-1333 (Thomson ISI-Impact factor:1.178 – Q2: METALLURGY & METALLURGICAL ENGINEERING)
  2. Hamzah, E., Yong, T.M., Mat Yajid, M.A. (2013) Surface morphology and bond characterization of nanocrystalline diamonds grown on tungsten carbide via hot filament chemical vapor deposition. Journal of Crystal Growth 372, pp. 109-115 (Thomson ISI-Impact factor: 1.698 – Q2: PHYSICS, APPLIED).
  3. Mohammadreza Daroonparvar, Muhamad Azizi Mat Yajid, Noordin Mohd.Yusof & Mohammad Sakhawat Hussain (2013) The role of nanostructured Al2O3 layer in reduction of hot corrosion products in normal YSZ layer. Journal of Nanomaterials, Volume 2013, art. no. 251921 (Thomson ISI-Impact factor: 1.644 – Q2: MATERIALS SCIENCE, MULTIDISCIPLINARY).
  4. Mohammadreza Daroonparvar, Muhamad Azizi Mat Yajid, Noordin Mohd.Yusof & Mohammad Sakhawat Hussain (2013) Improved thermally grown oxide scale in air plasma sprayed NiCrAlY/nano YSZ coatings. Journal of Nanomaterials, Volume 2013, art. no. 520104 (Thomson ISI-Impact factor: 1.644 – Q2: MATERIALS SCIENCE, MULTIDISCIPLINARY).
  5. Mohammadreza Daroonparvar, Mohammad Sakhawat Hussain & Muhammad Azizi Mat Yajid (2012) The role of formation of continues thermally grown oxide layer on the nanostructured NiCrAlY bond coat during thermal exposure in air. Applied Surface Science 261, 287-297 (Thomson ISI-Impact factor: 2.711 – Q1: MATERIALS SCIENCE, COATINGS & FILMS).
  6. Prawoto, Y. & Mat Yajid, M. A. (2012) Stress distribution among constituting phases within the austenite microstructure: Mechanics and metallurgical approaches using 2-D model of stainless steel compact tension specimen. Computational Materials Science 60, 105–112 (Thomson ISI-Impact factor: 2.131 – Q2: MATERIALS SCIENCE MULTIDISCIPLINARY).
  7. Prawoto, Y., Kamsah, N., Mat Yajid, M. A. & Ahmad, Z. (2011) Energy density mechanics applied to coating blistering problems. Theoretical and Applied Fracture Mechanics 56 (2), 89-94 (Thomson ISI-Impact factor: 1.262 – Q2: ENGINEERING, MECHANICAL).
  8. Gnanavel, T., Mat Yajid, M.A., Saghi, Z., Peng, Y., Inkson, B.J., Gibbs, M.R.J. & Moebus, G. (2011) Electron beam nanofabrication of ferromagnetic nanostructures in TEM. Applied Physics A: Materials Science & Processing. 102 (1), 205-211 (Thomson ISI-Impact factor: 1.704 – Q2: PHYSICS, APPLIED).
  9. Mat Yajid, M.A., Bagshaw, H., Doole, R.C., Wagner, T. & Möbus, G. (2010). In-situ and ex-situ TEM investigation of Cu-Al and Cu-Al-Cu-Ti reactive metallic multilayer coatings. Journal of Materials Research 25 (6), 1196-1203 (Thomson ISI-Impact factor: 1.647 – Q2: MATERIALS SCIENCE, MULTIDISCIPLINARY).
  10. Mat Yajid, M.A. & Möbus, G. (2009). Reactive Multilayers Examined by HRTEM and Plasmon EELS Chemical Mapping. Microscopy and Microanalysis 15(01), 54-61 (Thomson ISI-Impact factor: 1.877 – Q2: MATERIALS SCIENCE, MULTIDISCIPLINARY).
  11. Mat Yajid, M.A., Wagner, T. & Möbus, G. (2008). Plasmon energy chemical phase mapping of reactive multilayers. Physica status solidi (RRL) – Rapid Research Letters 2(1), 7-9 (Thomson ISI-Impact factor: 2.142 – Q2: MATERIALS SCIENCE, MULTIDISCIPLINARY).

 

SCOPUS Journal :

 2015

  1. Mohd Zulkifli, I.S., Yajid, M.A.M., Idris, M. H., Daroonparvar, M., and Hamdan, H. (2015) TGO Formation with NiCoCrAlYTa Bond Coat Deposition using APS and HVOF Method. Advanced Materials Research, Volume 1125, 2015, Pages 18-22.
  1. Hamidi, E., Fazeli, A., Yajid, M.A.M., Sidik, N.A.C. (2015) Materials selection for hip prosthesis by the method of weighted properties. Jurnal Teknologi. Volume 75, 11, Pages 1-9 (Scopus).
  1. Yong, T.M, Hamzah, E., Mat Yajid, M. A (2015) Characterisation of nanocrystalline diamond coating deposited via hot filament chemical vapour deposition method with various seeding methods. Jurnal Teknologi. Volume 75, 7, Pages 51-59(Scopus).

2014

  1. Halim, Z.A.A., Yajid, M.A.M., Rosli, Z.M., Ali, R.A.M. (2014) Aluminum-copper bilayers thin films deposited at room temperature by RF magnetron sputtering. Applied Mechanics and Materials. Volume 606, 2014, Pages 105-109 (Scopus).
  1. Halim, Z.A.A., Yajid, M.A.M., Rosli, Z.M., Ali, R.A.M. (2014) Investigation of intermetallic phase formation and structural analysis in annealed al/cu bilayer thin films. Advanced Materials Research, Volume 845, 2014, Pages 221-225 (Scopus).
  1. Zulkifli, I.S.M., Yajid, M.A.M., Hamdan, H., Muhid, M.N.M. (2014) Maerogel: Alternative for thermal barrier coating topcoat. Advanced Materials Research, Volume 845, 2014, Pages 330-334 (Scopus).
  2. Halim, Z.A.A., Akram, A., Yajid, M.A.M. (2012) Morphological study of RF magnetron sputtered silicon thin films on AISI 304 stainless steel. Jurnal Teknologi (Sciences and Engineering) 59, Issue SUPPL.3, 83-86. (Scopus).
  3. Mohammadreza Daroonparvar & Muhamad Azizi Mat Yajid (2012) The role of heat treatment on microstructure and corrosion resistance of as-cast Ni-Al bronze alloys. ASM International – Quenching Control and Distortion – Proceedings of the 6th International Quenching and Control of Distortion Conference, Including the 4th International Distortion Engineering Conference. 867-875 (Scopus).
  4. Prawoto, Y., Mat Yajid, M. A. & Ahmad, Z. (2012) Coating life assessment: The use of adhesion strength in parametric development in coating degradation evaluation. Advanced Materials Research 488-489, 427-431 (Scopus).
  5. Mat Yajid, M.A. & Moebus, G. (2010). Nanostructured reactive metallic multilayers. Journal of Physics: Conference Series 241, 012030 (Web of Science).
  6. Gnanavel, T., Saghi, Z., Mat Yajid, M.A., Peng, Y., Inkson, B.J. & Moebus, G. (2010). Nanoscale sculpting of ferromagnetic structures by electron beam ablation. Journal of Physics: Conference Series 241, 012075 (Web of Science).
  7. Mat Yajid, M.A., Doole, R.C., Wagner, T. & Möbus, G. (2008). Heating and EELS experiments of CuAl reactive multilayers. Journal of Physics: Conference Series 126, 012064 (Web of Science).
  8. Mat Yajid, M.A., Wagner, T. & Möbus, G. (2008). Plasmon resonance chemical phase mapping of reactive multilayers. Microscopy and Microanalysis 14 (SUPPL. 2), 1362-1363 (Scopus).

BOOK CHAPTER :

           

2015

  1. Mohammadreza Daroonparvar, Muhamad Azizi Mat Yajid and Noordin Mohd Yusof. Comprehensive Guide for Nanocoatings Technology, Volume 2: Characterization and Reliability Book: A Review on Microstructural Modification of Thermally Grown Oxide Scale in Air Plasma Sprayed Thermal Barrier Coating Systems,  Nova pulisher, USA (March 2015). ISBN: 978-1-63482-685-3