Field Data Collection at Tanjung Sedeli, Johor

National Water Research Institute Malaysia through Research Center for Coastal and Oceanography (hereafter known as NAHRIM) conduct research with the collaboration of Center for Coastal and Ocean Engineering & School of Civil Engineering, Universiti Teknologi Malaysia (hereafter known as UTM) for study “The role of sediment source on erosion and sedimentation at the coastal zone for the potential development of innovative shoreline protection and preservation system” in Year 2020. This study is part of the MoU between NAHRIM and UTM. The location of the study is coastal area along the Tanjung Sedeli, Johor.

Continue reading “Field Data Collection at Tanjung Sedeli, Johor”

Numerical Model Study on the Physical Model of Ringlet Reservoir, Cameron Highlands

The physical model of Ringlet Reservoir is an alternative study for investigating efficient sediment removal proposed at Hydraulic and Instrumentation Laboratory in National Water Research Institute of Malaysia (NAHRIM). Universiti Teknologi Malaysia (UTM) has been engaged by NAHRIM to develop a physical and numerical model to study the hydrodynamic and sediment transport pattern. Sungai Habu and Ringlet were tested up to three return period; 1-year, 5-years and 100-years. Groyne (access ram) is identified as control mitigation structure for halting the sediment movement apart from existing check dam. Hydrodynamic models (HEC-RAS 2D with additional overview of simulation in FLOW-3D) were used to simulate numerically the physical model experiment. Three materials (wood dust, sand and bakelite) were used for the sediment plume distribution pattern. Continue reading “Numerical Model Study on the Physical Model of Ringlet Reservoir, Cameron Highlands”

Physical Model of Breakwater for Sungai Setiu Rivermouth

Two models (2D and 3D testing phase) were constructed at National Hydraulics Research Institute Malaysia (NAHRIM) in 2020. The main aim of 2D experiment is to observe the effect on the breakwater stability, damage and overtopping. Meanwhile, on the 3D experiment the main aims is to observe the wave attack, propagation and intrusion although effect on the breakwater stability and damage also monitored. Wave signals used in this project are generated from the Jonswap spectral.

Continue reading “Physical Model of Breakwater for Sungai Setiu Rivermouth”

Short Course on Hydraulic Modelling HEC-RAS 2D

This course is an introduction to modeling hydraulic problems using an open-source finite volume method. The modeling procedure for several practical hydraulic examples (including convergence study) was demonstrated using HEC-RAS 2D. This short course took place at the Le Grandeur Palm Resort, Senai from 3-4 October 2020. This short course was organised by Center for Coastal and Ocean Engineering (COEI), Universiti Teknologi Malaysia (UTM) in collaboration with National Water Research Institute of Malaysia (NAHRIM).

Continue reading “Short Course on Hydraulic Modelling HEC-RAS 2D”