Publication

ISI Indexed

  1. Elastic deformation and energy loss of flapping fly wings (2011). Journal of Experimental Biology. Download here
  2. Effect of Skin and Spar Laminate Orientations on Flutter of Composite UAV Wing (2019). Journal of Aeronautics, Astronautics and Aviation. Download here
  3. Influences of Propeller Advance Ratio on Delta-Winged UAV Model Vortex Properties (2019). Journal of Aeronautics, Astronautics and Aviation. Download here
  4. An automated visual tracking measurement for quantifying wing and body motion of free-flying houseflies (2019). Measurement. Download here
  5. Dynamics of body kinematics of freely flying houseflies responding to air turbulence (2019). Journal of Asia-Pacific Entomology. Download here 
  6. Effects of the Propeller Advance Ratio on Delta Wing UAV Leading Edge Vortex (2019). International Journal of Automotive and Mechanical Engineering. Download here
  7. CAMAR unmanned aerial system flight testing (2020). Aeronautical: Experimental and computational approach. Penerbit UTM Press. Download here
  8. Performance analysis of unmanned vertical take-off landing aerial vehicle (2020). Aeronautical: Experimental and computational approach. Penerbit UTM Press. Download here
  9. Displacement rate effects on mixed-mode I/II delamination of laminated carbon/epoxy composites (2022). Polymer testing. Download here
  10. Review of Uncertainty of the Flow over Low Sweep Lambda Wing Unmanned Combat Air Vehicles (UCAV) (2022). Journal of Aeronautics, Astronautics and Aviation. Download here
  11. Flow characterization of low sweep MULDICON wing at low speed  (2023). Aircraft Engineering and Aerospace Technology. Download here.
  12. Impact of Cowl Deflections on Scramjet Intake Aerodynamics with Shock-on-Lip Condition (2023). Journal of Aeronautics, Astronautics and Aviation, Series A. Download here.
  13. A review of perception sensors, techniques, and hardware architectures for autonomous low-altitude UAVs in non-cooperative local obstacle avoidance (2024). Robotics and Autonomous Systems. Download here.
  14. A systematic review of the UAV technology usage in ASEAN (2024).  IEEE Open Journal of Vehicular Technology. Download here.
  15. Vision-based autonomous navigation for quadrotor UAVs in unknown and constrained environments. International Journal of Intelligent Robotics and Applications (2025). Download here
  16. Prediction of pressure coefficient for saccon wing artificial neural network (2025). Journal of aeronautics, astronautics and aviation. Download here.
  17. Open-gap algorithm for fast reactive collision avoidance by autonomous UAV using sensor array (2025). Journal of aeronautics, astronautics and aviation. Download here.
  18. Evaluation and calibration of MEMS-IMU sensors for real-time landslide detection and monitoring system (2025). Engineering Research Express. Download here.
  19. Comprehensive Investigation of the Smouldering Characteristics of Hemic Peat under Varying Moisture Conditions and the Combined Influence of Wind Velocity and Direction (2025). Physics and Chemistry of the Earth. Download here.

Scopus Indexed

  1. Experimental study of UTM-LST generic half model transport aircraft (2016). IOP Conf. Series: Materials Science and Engineering. Download here
  2. Influences of External Store on Aerodynamic Performance of UTM-LST Generic Light Aircraft Model (2017). Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. Download here
  3. Wind Tunnel Experiment of UTM-LST Generic Light Aircraft Model with External Store (2018). International Review of Mechanical Engineering. Download here
  4. The Evaluation of k-ε and k-ω Turbulence Models in Modelling Flows and Performance of S-shaped Diffuser (2018). International Journal of Automotive and Mechanical Engineering. Download here
  5. Surface Roughness Effect on Vortex-Induced Vibration Phenomenon in Cross-Flow Direction of a Bluff Body (2019). Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. Download here
  6. Tuft Flow Visualisation on UTM-LST VFE-2 Delta Wing Model Configuration at High Angle of Attacks (2020). International Journal of Automotive and Mechanical Engineering. Download here
  7. Experimental and Numerical Analysis of a Motorcycle Air Intake System Aerodynamics and Performance (2020). International Journal of Automotive and Mechanical Engineering. Download here
  8. Feasibility Study of Plasma Actuator for Flow Separation Control (2020). Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. Download here
  9. Identification of Sharp Edge Non-Slender Delta Wing Aerodynamic Coefficient Using Neural Network (2021). Journal of Physics: Conference Series. Download here
  10. Computational Speed and Qualitative Assessment of Real-Time Image Stitching Algorithm (2021). International Conference on Communication, Control and Information Sciences (ICCISc). Download here
  11. Flow Visualisation over the Low Sweep Unmanned Combat Aerial Vehicle (UCAV) Configuration (2022). Lecture Notes in Electrical Engineering. Download here
  12. Preliminary Development and Performance Testing of an Autonomous Battery Charging System for a Two Legs Multicopter (2024). Proceedings of the International Seminar on Aeronautics and Energy (ISAE). Lecture Notes in Mechanical Engineering. Download here.
  13. Development of an Autonomous RC Catamaran for Surveillance and Pollution Monitoring (2024). Proceedings of the International Seminar on Aeronautics and Energy: ISAE. Lecture Notes in Mechanical Engineering. Download here.
  14. Development of Autonomous Battery Charging Station for Campus Surveillance UAV (2024). Proceedings of the International Seminar on Aeronautics and Energy: ISAE. Lecture Notes in Mechanical Engineering. Download here.
  15. Numerical Modeling of Flow-Induced Instabilities in a Cage-Type Steam Turbine Control Valve (2024). Lecture Notes in Mechanical Engineering. Download here.
  16. Face recognition deploying smart IoT system (2024). Conference Proceedings – IEEE International Conference on Advanced Telecommunication and Networking Technologies: Empowering Telecommunication Technologies for Sustainable Future, ATNT 2024. Download here.
  17. Optimal communication handover of SAR drone based on digital twin strategy (2024). Conference Proceedings – IEEE International Conference on Advanced Telecommunication and Networking Technologies: Empowering Telecommunication Technologies for Sustainable Future, ATNT 2024. Download here.
  18. ESP mesh network for security application (2024). Conference Proceedings – IEEE International Conference on Advanced Telecommunication and Networking Technologies: Empowering Telecommunication Technologies for Sustainable Future, ATNT 2024. Download here.

Non-indexed paper

  1. Design and analysis performance of fixed-wing VTOL UAV (2018). Journal of Transport System Engineering. Download here
  2. Aircraft Trajectory Optimization during Descent Using A Kriging-Model-Based-Genetic Algorithm (2018). Download here
  3. The analysis of lateral stability of tailless CAMAR-3 with winglets (2019). Journal of Transport System Engineering. Download here
  4. Structural analysis of hybrid VTOL configuration (2020). Journal of Transport System Engineering. Download here
  5. Development of photovoltaic power system for Unmanned Aerial Vehicle (UAV) (2020). Journal of Transport System Engineering. Download here
  6. Impact of blockage orientation onto the vortex-induced vibration of a circular cylinder (2020). Journal of Fluid and Structural Mechanics. Download here
  7. The influence of blower technique on delta-winged UAV vortex properties (2020). Journal of Fluid and Structural Mechanics. Download here
  8. The effect of velocity stack inlet diameter to air intake volume efficiency (2020). Journal of Fluid and Structural Mechanics. Download here
  9. Structural analysis of hybrid Vertical Take-off Landing (VTOL) configuration (2020). Journal of Transport System Engineering. Download here
  10. Development of an autonomous IoT-based drone for campus security (2021). ELEKTRIKA Journal of Electrical Engineering. Download here
  11. Assessment of roll and pitch control of UTM JagaDrone (2023). Journal of Transport System Engineering. Download here
  12. Thermodynamics analysis of solar-ejector pump OTEC (SEP-OTEC) Rankine cycle using ammonia as refrigerant (2023). Jurnal Mekanikal. Download here
  13. Drone technology in education: A bibliometric analysis (2024). International Journal of Education, Psychology and Counselling. Download here
  14. Effects of transition strip on aerodynamic yaw derivatives of MULDICON wing using an oscillating rig at various angle of attack (2024). International Journal of Aviation Science and Engineering. Download here

Other publications

  1. Economy impact due to the development of regional airport – A case study of Mersing Airport (2017), Southeast Asia Workshop on Aerospace Engineering (SAWAE 2017). Download here
  2. Wind tunnel experiments on a generic sharp-edged delta wing UAV model, Southeast Asia Workshop on Aerospace Engineering (SAWAE 2017). Download here
  3. Design and testing of a solar-powered ice-making machine. Southeast Asia Workshop on Aerospace Engineering (SAWAE 2017). Download here
  4. Wind tunnel test of blunt-edge delta wing VFE-2 profiles at high angles of attack (2017) Southeast Asia Workshop on Aerospace Engineering (SAWAE 2017). Download here
  5. Malaysia-Japan Conflict-Free Air Traffic Assignment using Heuristic Method. Southeast Asia Workshop on Aerospace Engineering (SAWAE 2018).. Download here
  6. Effect of Different Laminate Ply Orientations on Flutter of Composite UAV Wing (2018). Southeast Asia Workshop on Aerospace Engineering (SAWAE 2018).
  7. A design of radial inflow turbine for 3kW power using ocean thermal conversion (OTEC) technology (2021). CEMIE Oceano. Processing of the 8th International OTEC Symposium. Download here
  8. Experimental analysis for low-speed aerodynamic characteristics of MULDICON AVT251 UCAV configuration (2021). International Seminar on Aeronautics and Energy (ISEA 2021).
  9. Simulation study on the performance of OTEC using different working fluid (2021). International Seminar on Aeronautics and Energy (ISAE 2021). Download here
  10. Thermodynamic analysis on a New Revised OTEC cycle using ammonia (2021). International Seminar on Aeronautics and Energy (ISEA 2021).
  11. Development of automated warehouse inventory management system using drone technology and RFID system (2021). International Seminar on Aeronautics and Energy (ISAE 2021). Download here
  12. Effect of flow coefficient and rotor radius ratio radial turbine analysis (2021). 1st International Seminar on Aeronautics and Energy 2021. Download here
  13. Design of experiments for wind tunnel testing of 53-degree sweep lambda wing UCAV configuration (2021). International symposium on aircraft technology, MRO and operation 2021. SATECH–2021–000 Download here
  14. A simulation study of emergency response drone solution (2021). Sensor & instrumentation system series 19. ISBN 978–967–2975–45–8. Download here

Books and book Chapters

  1. Forces modelling of the flapping wing insect (Calliphora Vicina)
    Selected Topics in Aeronautics Engineering Research (2008). Edited by Mohammad Nazri Mohd Jaafar and Subramaniam Krishnan. ISBN 978-983-52-0542-2. UTM Press
  2. Forces integration and deformation modelling of the flapping wing insect (Calliphora Vicina)
    Selected Topics in Aeronautics Engineering Research (2008). Edited by Mohammad Nazri Mohd Jaafar and Subramaniam Krishnan. ISBN 978-983-52-0542-2. UTM Press
  3. Dynamics of high-speed-resolved wing and body kinematics of freely flying houseflies responding to directed and undirected air turbulence.
    Technische Universität, Darmstadt. [Ph.D. Thesis], (2017). http://tuprints.ulb.tu-darmstadt.de/5919/
  4. CAMAR unmanned aerial system flight testing (2020). Part 1 (Chapter 5). Aeronautical: Experimental and computational approach. Penerbit UTM Press. ISBN 978-983-52-1711-1
  5. Performance analysis of unmanned vertical take-off landing aerial vehicle (2020). Part 2 (Chapter 1). Aeronautical: Experimental and computational approach. Penerbit UTM Press. ISBN 978-983-52-1711-1
  6. Experimental Method for Mechanical Engineering (2021). Ocean and Aerospace Research Institute, Indonesia.  ISBN: 978-602-52491-5-0. Download here
  7. A simulation Study of Emergency Response Drone Solution (2021). Sensor & Instrumentation system Series 19. ISBN 978-967-2975-45-8, pp127-155. Penerbit UTHM. Download here
  8. Flow Characteristic of Blunt Edge Delta Wing (2021).ISBN 978-983-52-1866-8 Penerbit UTM. Download here

Flow Characteristics of Blunt-Edge Delta Wing | PENERBIT UTM PRESS