Category Archives: Call for Papers

SysCon 2020

The 14th annual IEEE International Systems Conference will address the discipline of systems engineering, including theory, technology, methodology, and applications of complex systems, system-of-systems, and integrated systems of national and global significance.

Due to high demand, the initial submission deadline has been extended to September 27th.

PAPER SUBMISSION 
The conference caters to both practitioners and academics, providing a forum to exchange ideas and experiences on technology, methodology, applications, study cases, and practical experiences. Topics include:

  • Systems Engineering
  • Engineering Systems-of-Systems
  • Systems Architecture
  • Socio-Technical Systems
  • Complex Systems
  • Cyber Security
  • Cloud Computing
  • Modeling & Simulation
  • Model-Based Systems Engineering
  • Systems Engineering Education & Theory
  • Systems Integration & Verification
  • Decision-making for Complex Systems
  • Autonomous Systems
  • Robotic Systems
  • Sensors Integration & Application
  • Large-Scale Systems Integration
  • Space and Communication Systems
  • Medical Systems
  • Defense Systems
  • Gaming and Entertainment Systems
  • Transportation Systems
  • Environmental Systems
  • Energy Management and Sustainability, including Renewable Energy
IMPORTANT DATES
Abstract & full paper submission: September 27, 2019
Acceptance notification: December 2, 2019
Full manuscript & early registration: February 14, 2020

 

CALL FOR PAPERS: NANOSUMMIT MALAYSIA CONFERENCE & EXPO – MYNANO 2019

Dear All,

Call for participation in the NANOSUMMIT MALAYSIA CONFERENCE & EXPO – MYNANO 2019 

We are seeking original research papers on all topics related to the consortium of academic institutions. Papers are peer-reviewed and selected based on technical novelty, integrity of the analysis and impacts in current trends of nanotechnology.

NanoSUMMIT 2019 will be held on August 21-22, 2019 at Putrajaya Marriott Hotel.

The themes are as follows, but not limited too:

– Energy

– Wellness, Medical & Healthcare

– Nanoelectronics, Nanodevices and Nanosystems

– Environment

– Agriculture and Food Science

Important deadlines:

Abstract submission: 31 May 2019 

Notification of Acceptance: 30 June 2019

Full Paper Submission: 31 July 2019

Please visit our website for further information:

http://mynano2019.mynano.my/nanosym/

Thank you.

Best Regards,

NANOSUMMIT 2019

Ts. Dr. Rozzeta Dolah CEng MIET
Department of Mechanical Engineering
Razak Faculty of Technology and Informatics
Level 5, Menara Razak,
Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra,
54100 Kuala Lumpur,
Malaysia

ICOWOBAS 2019

Date:
15 July 2019 (Workshop)
16-17 July 2019 (Conference)
Venue: KSL Resorts, Johor Bahru
The conference is jointly organized by the Faculty of Science, Universiti Teknologi Malaysia (Johor, Malaysia), Faculty of Science and Technology, Universitas Airlangga (Surabaya, Indonesia), and Salahaddin University-Erbil ( Erbil, Kurdistan, Iraq).
The scope of the ICOWOBAS 2019 encompasses research from fundamental principles to practical applications in the broad field of mathematics, physics, chemistry and biology.
 Important Dates:
Last date for abstract submission : 15 Mac 2019
Notification of acceptance : 15 April 2019
Early bird registration with payment : 15 May 2019
Deadline registration with payment : 15 June 2019
Deadline for full paper: 15 June 2019
Details of the conference can be found at https://science.utm.my/icowobas2019/
Thank you.
Best Regards,
ICOWOBAS 2019 Secretariat

The 4th International Conference on Defence & Security Technology & The 3rd International Conference on Engineering and Technology 2018 (DSTC & INTCET 2018)

Call For Paper
The 4th International Conference on Defence & Security Technology & The 3rd International Conference on Engineering and Technology 2018 (DSTC & INTCET 2018)
21 – 22 November 2018, Marriott Putrajaya Malaysia

INTCET 2018 Official Conference website: http://intcet2018.com
DSTC 2018 Official Conference website: http://dstc.upnm.edu.my/index.php

With great honor, we would like to announce a call for paper International Conference on Engineering and Technology (IntCET) and Defence & Security Technology Conference (DSTC), which will be held at Marriott Putrajaya, on 21st-22nd Nov 2018. The conferences will promote and disseminate the knowledge concerning several topics and technologies related to engineering, technology, defence and security areas.

The main goal of the conferences is to bring together researchers, scientists and experts in universities, companies, institutions, communities, agencies, associations and societies and provide a unique platform for sharing worldwide ideas as well as the recent developments in sustainable engineering innovation.

4 Conferences running in One big event:
1.      4th International Conference on Defence & Security Technology (DSTC 2018)

INCET 2018
2.      International Conference on Civil and Environmental Engineering (IntCIVEE 2018)
3.      International Conference on Mechanical Engineering (IntCMecH 2018)
4.      International Conference on Civil and Environmental Engineering (IntCIVEE 2018)

Scopes:

1) DSTC 2018
4th International Conference on Defence & Security Technology (DSTC), invites knowledge sharing on a spectrum of topics within the defence and security bandwidth, relevant but not limited to the following:
•       Survivability
•       Communication and Surveillance
•       Defence Mobility
•       Weapon and Ammunition
•       Electronic Warfare
•       Defence Management and Strategies
•       Remote Sensing and Sensors
•       Wireless Sensor Networks
•       Data and Communications Securities
•       Information Technologies
•       Radar and Systems
•       Signal and Image Processing
•       Defence and Security Technology Policies
•       Laser and Photonics
•       Civil and Mechanical
•       Aerospace
•       Biomedical Engineering
•       Antenna, Propagation & Measurement

2) IntCIVEE 2018
International Conference on Civil and Environmental Engineering (IntCIVEE 2018)
invites knowledge sharing on a spectrum of topics within the civil and environmental engineering bandwidth, relevant but not limited to the following:
•       Structural Engineering and Mechanics
•       Dynamic and Earthquake Engineering
•       Bridge Engineering
•       Materials Engineering
•       Geotechnical Engineering
•       Engineering Geology
•       Hydraulic Engineering
•       Engineering Hydrology and water Resources
•       Environmental Engineering
•       Climate Change and Meteorology
•       Wetland and Ecology
•       Water and Wastewater Treatment Technologies
•       Water Supply and Drainage
•       Waste Disposal and Recycling
•       Highway and Transportation
•       Geographical Information Systems and Remote Sensing
•       Construction and Building Materials
•       Building Information Model (BIM)
•       Disaster Preparedness, Response and Recovery
•       Disaster Risk Reduction and Management
•       Green and Sustainable Technology
•       Rehabilitation and Maintenance
•       Infrastructure Lifecycle Management
•       Engineering Economic, Education, Law and Policy
•       Environmental Safety and Health

3) IntCMecH 2018
International Conference on Mechanical Engineering (IntCMecH 2018) invites knowledge sharing on a spectrum of topics within the mechanical engineering bandwidth, relevant but not limited to the following:
•       Operations Management
•       Logistics
•       Supply Chain Management
•       Reliability Engineering
•       Maintenance Engineering
•       Total Quality Management
•       Quality Engineering
•       Artificial Intelligence
•       Expert Systems
•       Non-Traditional Machining processes
•       Machinability of Materials
•       Composite Materials
•       Tribology
•       Design Tools, Cutting Tool Material and Coatings
•       Energy Conservation
•       Renewable Energy Techniques
•       Fluid Dynamics, Bio-fuels and Fuel Cells
•       CAD/CAM, Automation & Robotics
•       Advances Aero Space Technology
•       Transportation Systems

4) IntCIVEE 2018
International Conference on Civil and Environmental Engineering (IntCIVEE 2018) invites knowledge sharing on a spectrum of topics within the civil and environmental engineering bandwidth, relevant but not limited to the following:
•       Structural Engineering and Mechanics
•       Dynamic and Earthquake Engineering
•       Bridge Engineering
•       Materials Engineering
•       Geotechnical Engineering
•       Engineering Geology
•       Hydraulic Engineering
•       Engineering Hydrology and water Resources
•       Environmental Engineering
•       Climate Change and Meteorology
•       Wetland and Ecology
•       Water and Wastewater Treatment Technologies
•       Water Supply and Drainage
•       Waste Disposal and Recycling
•       Highway and Transportation
•       Geographical Information Systems and Remote Sensing
•       Construction and Building Materials
•       Building Information Model (BIM)
•       Disaster Preparedness, Response and Recovery
•       Disaster Risk Reduction and Management
•       Green and Sustainable Technology
•       Rehabilitation and Maintenance
•       Infrastructure Lifecycle Management
•       Engineering Economic, Education, Law and Policy
•       Environmental Safety and Health

Important Dates (GMT +8:00)
1.      Full Paper Deadline: 30 September 2018
2.      Acceptance Notification: 7 October 2018
3.      Camera-ready Paper Deadline: 15 October 2018

Contact Us

The Secretariat
The 4th International Conference on Defence & Security Technology & The 3rd International Conference on Engineering and Technology 2018

Faculty of Engineering,
Universiti Pertahanan Nasional Malaysia,
57000, WP Kuala Lumpur Malaysia

Email: dstc@upnm.edu.my

The 4th International Conference on Computing, Mathematics and Statistics 2019 (iCMS2019)

Call For Paper
The 4th International Conference on Computing, Mathematics and Statistics 2019 (iCMS2019)
23 – 24 April 2019, Ombak Villa, Langkawi Island, Malaysia

Website: https://uitmicms.wixsite.com/icms2019
Registration & Submission: https://submit.confbay.com/conf/icms2019

The International Conference on Computing, Statistics and Mathematics (iCMS) is a biennial conference commencing since 2013. The conference is hosted by the Faculty of Computer and Mathematical Sciences, Universiti Teknologi MARA (UiTM) Kedah, Malaysia. The focus of iCMS is on Computer Science, Statistics, Mathematics, and the application centring on these fields of study.

Over the years, iCMS international conference has attracted many high quality papers from domestic as well as global contributors.  For iCMS2017, more than 110 papers have been accepted and have been/will be published separately in selected indexed journals and proceedings to be published by Springer.

Along with the iCMS international conference, the organising committee had also successfully hosted several pre-conference workshops namely, Partial Least Square (PLS), Artificial Neural Network (ANN), R and Data Visualization & Manipulation, Modelling Communicable Disease Dynamics & Control, and Social Network Analysis (SNA). These workshops were conducted by local/international reputable trainers/experts and had received positive feedback from the participants.

The iCMS2019 will be our fourth international conference. The theme of the conference is “Discover New Knowledge through Research”. Learning through experience, we strongly believed that this upcoming conference is ready to offer more exciting platform for professors, academics researchers and students from all over the world to come together and learn from each other the latest happenings in the academic research arena.

TRACKS
Computer Science & Information Technology
•       Algorithms and theory
•       Software engineering
•       Concurrent, distributed and parallel computing
•       Computer architecture
•       Computer Networking and Networked Systems
•       Security and privacy
•       Information Science
•       Artificial intelligence
•       Computer graphics and Visualization
•       Computational Science

Mathematics
•       Actuarial Science
•       Applied Mathematics
•       Biomathematics
•       Financial Engineering / Financial Mathematics / Quantitative Finance
•       Formalization of Mathematics
•       Foundation of Mathematics
•       Mathematics
•       Mathematical Software Design and Implementation
•       Mathematical Modelling
•       Mathematical Physics
•       Pure Mathematics
•       System Dynamics

Statistics
•       Applied Statistics
•       Biostatistics / epidemiology
•       Bioinformatics
•       Business Statistics
•       Computational Statistics
•       Data Mining; Econometrics
•       Environmental Statistics
•       Industrial Statistics
•       Industrial Quality Control
•       Mathematical Statistics
•       Modelling and Simulation
•       Operations Research
•       Probability
•       Quantitative Methods
•       System Dynamics

R and its Users
•       R & Other Languages/ Systems
•       R Community
•       R for Statistical Computing
•       R in Economics, Business and Industry
•       R in Ecology and Environment
•       R in Education
•       R in Official Statistic
•       R in Medical Research
•       Reproducible Research
•       Visualization & Graphics

Computer Science/ Mathematics/ Statistics Education (CMS)
•       Innovative Teaching and Learning in CMS
•       Evaluation and Assessment in CMS Education
•       Using Technology in CMS Education
•       Visualization in the Teaching and Learning of CMS
•       Mathematics Education at Preschool Level
•       Problem Solving in Mathematics Education
•       Activities and Programs for Students with Special Needs

Applications of Computer and Mathematical Sciences in:
•       Social Sciences
•       Business
•       Industry
•       Sciences

Modelling in Medical and Health Sciences
•       Bioinformatics
•       Biostatistics
•       Epidemiology
•       Computational Medicine
•       Health and Numbers
•       Health Informatics
•       Medical Statistics
•       Modelling and Simulation
•       Quantitative Psychology

Publication Opportunities
All accepted papers will be published either in selected journal or as a book chapter.

Authors have the opportunity to choose the most relevant indexed journal listed below to publish full papers. The full papers will be subjected to the journal’s independent review process and final acceptance of publication is determined by the Chief Editor of the respective journal.

•       International Journal of Engineering & Technology
(https://www.sciencepubco.com/index.php/ijet)
Scopus indexed journal (ISSN: 2227-524X)

•       Austrian Journal of Statistics
(http://www.ajs.or.at/index.php/ajs)
Indexed and listed in WoS ISI, Scopus, DOAJ, Scimago (Impact Factor via Publish or Perish: 0.775)

•       Romanian Statistical Review
(http://www.revistadestatistica.ro/index.php/)
Web ScienceTM Core Collection –  Emerging Source Citation Index (ESCI), RePec, DOAJ,  Index Copernicus International, EBSCO

•       Book chapters with e-ISBN, to be indexed by Google Scholar
(for accepted and presented full papers not submitted to above-indexed journals)

* Papers submitted to the above-indexed journal might incur an extra minimal publication charge subjected to the requirement of the journal.

Previous Conference

•        Proceedings of (iCMS2015) can be accessed via
http://link.springer.com/book/10.1007%2F978-981-10-2772-7
“Since it was launched online on November  24th  2016, a total of 4633 chapter downloads  were made from this proceedings. Thus making it the top 25% most downloaded e-book in 2017”  –  Springer

•        Selected papers published in Romania Statistical Review can be accessed via
www.revistadestatistica.ro/index.php/romanian-statistical-review-12018/

Important Dates (GMT +8:00)
1.      Abstract Deadline: 30 September 2018
2.      Abstract Acceptance Notification: 15 October 2018
3.      Full Paper Deadline: 30 November 2018
4.      Camera-ready Paper Deadline: 30 December 2018
5.      Early Bird Deadline: 30 October 2018

Secretariat iCMS2019
Faculty of Computer & Mathematical Sciences
Universiti Teknologi MARA Kedah
08400 Merbok
Kedah, Malaysia
Email: icms2019@uitm.edu.my

Website: https://uitmicms.wixsite.com/icms2019
Registration & Submission: https://submit.confbay.com/conf/icms2019